The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries
Abstract
ConspectusAll-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing to their exceptional room temperature ionic conductivity comparable even to those of their liquid electrolyte counterparts. Moreover, the good deformability of sulfide SEs renders them suitable for reducing the interfacial resistance between particles, thereby obviating the need for high-temperature sintering. Nevertheless, sulfide-based ASSB technology still remains at the research stage without any manufacturing schemes having been established. This state of affairs originates from the complex challenges presented by various aspects of these SEs: their weak stability in air, questions surrounding the exact combination of slurry solvent and polymeric binder for solution-based electrode fabrication, their high interfacial resistance resulting from solid particle contacts, and limited scalability with respect to electrode fabrication and cell assembly. In this Account, we review recent developments in which these issues were addressed by starting with the materials and moving on to processing, focusing on new trials. As for enhancing the air stability of sulfide SEs, strengthening the metal-sulfur bond based on the hard-soft acid-base (HSAB) theory has yielded the most notable results, although the resulting sacrificed energy density and weakened anode interface stability would need to be resolved. Novel electrode fabrication techniques that endeavor to overcome the critical issues originating from the use of sulfide SEs are subsequently introduced. The wet chemical coating process can take advantage of the know-how and facilities inherited from the more established lithium-ion batteries (LIBs). However, the dilemmatic matter of contention relating to the polarity mismatch among the slurry solvent, SE, and binder requires attention. Recent solutions to these problems involved the exploration of various emerging concepts, such as polarity switching during electrode fabrication, fine polarity tuning by accurate grafting, and infiltration of the electrode voids by a solution of the SE. The process of using a dry film with a fibrous binder has also raised interest, motivated by lowering the manufacturing cost, maintaining the environment, and boosting the volumetric energy density. Finally, optimization of the cell assembly and operation is reviewed. In particular, the application of external pressure to each unit cell has been universally adopted both in the fabrication step and during cell operation to realize high cell performance. The effect of pressurization is discussed by correlating it with the interface stability and robust interparticle contacts. Based on the significant progress that has been made thus far, we aim to encourage the battery community to engage their wide-ranging expertise toward advancing sulfide-based ASSBs that are practically feasible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Cited by
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Metadata
- Authors
- Lee, J., Lee, T., Char, K., Kim, K. J., & Choi, J. W.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-17
- Volume
- 54
- Issue
- 17
- Pages
- 3390-3402
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W3194845170
- Cited by
- 235
- References
- 2
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries. https://app.cochat.ai/papers/10.1021/acs.accounts.1c00333
- The paper
- Lee, J., Lee, T., Char, K., Kim, K. J., & Choi, J. W. (2021). Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries. Accounts of Chemical Research. https://doi.org/10.1021/acs.accounts.1c00333
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.