The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Surface-Catalyzed C–C Covalent Coupling Strategies toward the Synthesis of Low-Dimensional Carbon-Based Nanostructures
Open accessAbstract
Carbon-based nanostructures have attracted tremendous interest because of their versatile and tunable properties, which depend on the bonding type of the constituting carbon atoms. Graphene, as the most prominent representative of the π-conjugated carbon-based materials, consists entirely of sp(2)-hybridized carbon atoms and exhibits a zero band gap. Recently, countless efforts were made to open and tune the band gap of graphene for its applications in semiconductor devices. One promising method is periodic perforation, resulting in a graphene nanomesh (GNM), which opens the band gap while maintaining the exceptional transport properties. However, the typically employed lithographic approach for graphene perforation is difficult to control at the atomic level. The complementary bottom-up method using surface-assisted carbon-carbon (C-C) covalent coupling between organic molecules has opened up new possibilities for atomically precise fabrication of conjugated nanostructures like GNM and graphene nanoribbons (GNR), although with limited maturity. A general drawback of the bottom-up approach is that the desired structure usually does not represent the global thermodynamic minimum. It is therefore impossible to improve the long-range order by postannealing, because once the C-C bond formation becomes reversible, graphene as the thermodynamically most stable structure will be formed. This means that only carefully chosen precursors and reaction conditions can lead to the desired (non-graphene) material. One of the most popular and frequently used organic reactions for on-surface C-C coupling is the Ullmann reaction of aromatic halides. While experimentally simple to perform, the irreversibility of the C-C bond formation makes it a challenge to obtain long-range ordered nanostructures. With no postreaction structural improvement possible, the assembly process must be optimized to result in defect-free nanostructures during the initial reaction, requiring complete reaction of the precursors in the right positions. Incomplete connections typically result when mobile precursor monomers are blocked from reaching unsaturated reaction sites of the preformed nanostructures. For example, monomers may not be able to reach a randomly formed internal cavity of a two-dimensional (2D) nanostructure island due to steric hindrance in 2D confinement, leaving reaction sites in the internal cavity unsaturated. Wrong connections between precursor monomers, here defined as intermolecular C-C bonds forcing the monomer into a nonideal position within the structure, are usually irreversible and can induce further structural defects. The relative conformational flexibility of the monomer backbones permits connections between deformed monomers when they encounter strong steric hindrance. This, however, usually leads to heterogeneous structural motifs in the formed nanostructures. This Account reviews some of the latest developments regarding on-surface C-C coupling strategies toward the synthesis of carbon-based nanostructures by addressing the above-mentioned issues. The strategies include Ullmann coupling and other, "cleaner" alternative C-C coupling reactions like Glaser coupling, cyclo-dehydrogenation, and dehydrogenative coupling. The choice of substrate materials and precursor designs is crucial for optimizing substrate reactivity and precursor diffusion rates, and to reduce events of wrong linkage. Hierarchical polymerization is employed to steer the coupling route, which effectively improves the completeness of the reaction. Effects of byproducts on nanostructure formation is comprehended with both experimental and theoretical studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Atomically precise bottom-up fabrication of graphene nanoribbons
Cai, J., Ruffieux, P., Jaafar, R., Bieri, M., Braun, T., Blankenburg, S., Muoth, M., Seitsonen, A. P., Saleh, M., Feng, X., et al. (2010) · Nature · doi:10.1038/nature09211 · Cited by 3,689
Nano-architectures by covalent assembly of molecular building blocks
Grill, L., Dyer, M., Lafferentz, L., Persson, M., Peters, M. V., & Hecht, S. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.346 · Cited by 1,399
Bai, J., Zhong, X., Jiang, S., Huang, Y., & Duan, X. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.8 · Cited by 1,378
Porous graphenes: two-dimensional polymer synthesis with atomic precision
Bieri, M., Treier, M., Cai, J., Aït-Mansour, K., Ruffieux, P., Gröning, O., Gröning, P., Kastler, M., Rieger, R., Feng, X., et al. (2009) · Chemical Communications · doi:10.1039/b915190g · Cited by 702
Graphene nanoribbon heterojunctions
Cai, J., Pignedoli, C. A., Talirz, L., Ruffieux, P., Söde, H., Liang, L., Meunier, V., Berger, R., Li, R., Feng, X., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.184 · Cited by 621
Controlling on-surface polymerization by hierarchical and substrate-directed growth
Lafferentz, L., Eberhardt, V., Dri, C., Africh, C., Comelli, G., Esch, F., Hecht, S., & Grill, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1242 · Cited by 564
Graphene Antidot Lattices: Designed Defects and Spin Qubits
Pedersen, T. G., Flindt, C., Pedersen, J., Mortensen, N. A., Jauho, A.-P., & Pedersen, K. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.136804 · Cited by 543
Bieri, M., Nguyen, M.-T., Gröning, O., Cai, J., Treier, M., Aït-Mansour, K., Ruffieux, P., Pignedoli, C. A., Passerone, D., Kastler, M., et al. (2010) · Journal of the American Chemical Society · doi:10.1021/ja107947z · Cited by 514
Treier, M., Pignedoli, C. A., Laino, T., Rieger, R., Müllen, K., Passerone, D., & Fasel, R. (2011) · Nature Chemistry · doi:10.1038/nchem.891 · Cited by 454
Homo-coupling of terminal alkynes on a noble metal surface
Zhang, Y.-Q., Kepčija, N., Kleinschrodt, M., Diller, K., Fischer, S., Papageorgiou, A. C., Allegretti, F., Björk, J., Klyatskaya, S., Klappenberger, F., et al. (2012) · Nature Communications · doi:10.1038/ncomms2291 · Cited by 423
Linear Alkane Polymerization on a Gold Surface
Zhong, D., Franke, J.-H., Podiyanachari, S. K., Blömker, T., Zhang, H., Kehr, G., Erker, G., Fuchs, H., & Chi, L. (2011) · Science · doi:10.1126/science.1211836 · Cited by 381
Fabrication and Characterization of Large-Area, Semiconducting Nanoperforated Graphene Materials
Kim, M., Safron, N. S., Han, E., Arnold, M. S., & Gopalan, P. (2010) · Nano Letters · doi:10.1021/nl9032318 · Cited by 341
Synthesis of Polyphenylene Molecular Wires by Surface‐Confined Polymerization
Lipton‐Duffin, J. A., Ivasenko, O., Perepichka, D. F., & Rosei, F. (2009) · Small · doi:10.1002/smll.200801943 · Cited by 334
Basagni, A., Sedona, F., Pignedoli, C. A., Cattelan, M., Nicolas, L., Casarin, M., & Sambi, M. (2015) · Journal of the American Chemical Society · doi:10.1021/ja510292b · Cited by 271
Eichhorn, J., Nieckarz, D., Ochs, O., Samanta, D., Schmittel, M., Szabelski, P. J., & Lackinger, M. (2014) · ACS Nano · doi:10.1021/nn501567p · Cited by 225
Synthesis of Extended Graphdiyne Wires by Vicinal Surface Templating
Cirera, B., Zhang, Y.-Q., Björk, J., Klyatskaya, S., Chen, Z., Ruben, M., Barth, J. V., & Klappenberger, F. (2014) · Nano Letters · doi:10.1021/nl4046747 · Cited by 188
Sinitskii, A., & Tour, J. M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105426h · Cited by 180
Weak localization and transport gap in graphene antidot lattices
Eroms, J., & Weiß, D. (2009) · New Journal of Physics · doi:10.1088/1367-2630/11/9/095021 · Cited by 143
Cited by
On‐Surface Synthesis of Atomically Precise Graphene Nanoribbons
Talirz, L., Ruffieux, P., & Fasel, R. (2016) · Advanced Materials · doi:10.1002/adma.201505738 · Cited by 524
Two-Dimensional Polymers and Polymerizations
Evans, A. M., Strauss, M. J., Corcos, A. R., Hirani, Z., Ji, W., Hamachi, L. S., Aguilar-Enriquez, X., Chavez, A. D., Smith, B. J., & Dichtel, W. R. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01184 · Cited by 324
Metadata
- Authors
- Fan, Q., Gottfried, J. M., & Zhu, J.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-07-21
- Volume
- 48
- Issue
- 8
- Pages
- 2484-2494
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2258047439
- Cited by
- 318
- References
- 19
- FWCI
- 21.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.