The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Oligomer Molecules for Efficient Organic Photovoltaics
Abstract
Solar cells, a renewable, clean energy technology that efficiently converts sunlight into electricity, are a promising long-term solution for energy and environmental problems caused by a mass of production and the use of fossil fuels. Solution-processed organic solar cells (OSCs) have attracted much attention in the past few years because of several advantages, including easy fabrication, low cost, lightweight, and flexibility. Now, OSCs exhibit power conversion efficiencies (PCEs) of over 10%. In the early stage of OSCs, vapor-deposited organic dye materials were first used in bilayer heterojunction devices in the 1980s, and then, solution-processed polymers were introduced in bulk heterojunction (BHJ) devices. Relative to polymers, vapor-deposited small molecules offer potential advantages, such as a defined molecular structure, definite molecular weight, easy purification, mass-scale production, and good batch-to-batch reproducibility. However, the limited solubility and high crystallinity of vapor-deposited small molecules are unfavorable for use in solution-processed BHJ OSCs. Conversely, polymers have good solution-processing and film-forming properties and are easily processed into flexible devices, whereas their polydispersity of molecular weights and difficulty in purification results in batch to batch variation, which may hamper performance reproducibility and commercialization. Oligomer molecules (OMs) are monodisperse big molecules with intermediate molecular weights (generally in the thousands), and their sizes are between those of small molecules (generally with molecular weights <1000) and polymers (generally with molecular weights >10000). OMs not only overcome shortcomings of both vapor-deposited small molecules and solution-processed polymers, but also combine their advantages, such as defined molecular structure, definite molecular weight, easy purification, mass-scale production, good batch-to-batch reproducibility, good solution processability, and film-forming properties. Therefore, OMs are a good choice for solution-processed reproducible OSCs toward scalable commercialized applications. Considerable efforts have been dedicated to developing new OM electron donors and electron acceptors for OSCs. So far, the highest PCEs of solution-processed OSCs based on OM donors and acceptors are 9-10% and 6-7%, respectively. OM materials have become promising alternatives to polymer and/or fullerene materials for efficient and stable OSCs. In this Account, we present a brief survey of the recent developments in solution-processable OM electron donors and acceptors and their application in OSCs. Rational design of OMs with star- and linear-shaped structures based on triphenylamine, benzodithiophene, and indacenodithiophene units and their impacts on device performance are discussed. Structure-property relationships are also proposed. Furthermore, the remaining challenges and the key research directions in the near future are also addressed. In the next years, an interdisciplinary approach involving novel OM materials, especially electron acceptor materials, accurate morphology optimization, and advanced device technologies will probably bring high-efficiency and stable OSCs to final commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Self-citationSynthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Rylene and Related Diimides for Organic Electronics
Zhan, X., Facchetti, A., Barlow, S., Marks, T. J., Ratner, M. A., Wasielewski, M. R., & Marder, S. R. (2011) · Advanced Materials · doi:10.1002/adma.201001402 · Cited by 1,773
Self-citationSmall molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Self-citationSingle-junction polymer solar cells with high efficiency and photovoltage
He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., & Cao, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.6 · Cited by 1,675
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Liao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
n‐Type Organic Semiconductors in Organic Electronics
Anthony, J. E., Facchetti, A., Heeney, M., Marder, S. R., & Zhan, X. (2010) · Advanced Materials · doi:10.1002/adma.200903628 · Cited by 1,181
Self-citationHuo, L., Zhang, S., Guo, X., Xu, F., Li, Y., & Hou, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103313 · Cited by 985
Perylene Imides for Organic Photovoltaics: Yesterday, Today, and Tomorrow
Li, C., & Wonneberger, H. (2012) · Advanced Materials · doi:10.1002/adma.201104447 · Cited by 922
Roquet, S., Cravino, A., Leriche, P., Alévêque, O., Frère, P., & Roncali, J. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058178e · Cited by 787
Non-fullerene acceptors for organic photovoltaics: an emerging horizon
Lin, Y., & Zhan, X. (2014) · Materials Horizons · doi:10.1039/c4mh00042k · Cited by 745
Self-citationMolecular Bulk Heterojunctions: An Emerging Approach to Organic Solar Cells
Roncali, J. (2009) · Accounts of Chemical Research · doi:10.1021/ar900041b · Cited by 716
Kan, B., Zhang, Q., Li, M., Wan, X., Ni, W., Long, G., Wang, Y., Yang, X., Feng, H., & Chen, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509703k · Cited by 702
Ye, L., Zhang, S., Huo, L., Zhang, M., & Hou, J. (2014) · Accounts of Chemical Research · doi:10.1021/ar5000743 · Cited by 699
High Performance Photovoltaic Applications Using Solution-Processed Small Molecules
Chen, Y., Wan, X., & Long, G. (2013) · Accounts of Chemical Research · doi:10.1021/ar400088c · Cited by 667
High-performance fullerene-free polymer solar cells with 6.31% efficiency
Lin, Y., Zhang, Z.-G., Bai, H., Wang, J., Yao, Y., Li, Y., Zhu, D., & Zhan, X. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03424d · Cited by 624
Self-citationConjugated Polymer–Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Zhang, J., Zhang, Y., Fang, J., Lu, K., Wang, Z., Ma, W., & Wei, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03449 · Cited by 530
Cui, C., Wong, W.-Y., & Li, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00446a · Cited by 508
Design and Synthesis of Molecular Donors for Solution-Processed High-Efficiency Organic Solar Cells
Coughlin, J. E., Henson, Z. B., Welch, G. C., & Bazan, G. C. (2014) · Accounts of Chemical Research · doi:10.1021/ar400136b · Cited by 485
A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells
Lin, Y., Wang, Y., Wang, J., Hou, J., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Materials · doi:10.1002/adma.201400525 · Cited by 414
Self-citationA Solution‐Processable Star‐Shaped Molecule for High‐Performance Organic Solar Cells
Shang, H., Fan, H., Liu, Y., Hu, W., Li, Y., & Zhan, X. (2011) · Advanced Materials · doi:10.1002/adma.201004445 · Cited by 362
Self-citationLin, Y., Cheng, P., Li, Y., & Zhan, X. (2012) · Chemical Communications · doi:10.1039/c2cc31511d · Cited by 298
Self-citationA High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell
Sharenko, A., Proctor, C. M., van der Poll, T. S., Henson, Z. B., Nguyen, T., & Bazan, G. C. (2013) · Advanced Materials · doi:10.1002/adma.201301167 · Cited by 258
Lin, Y., Ma, L., Li, Y., Liu, Y., Zhu, D., & Zhan, X. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300181 · Cited by 210
Self-citationAn All‐Small‐Molecule Organic Solar Cell with High Efficiency Nonfullerene Acceptor
Kwon, O. K., Park, J., Kim, D. W., Park, S. K., & Park, S. Y. (2015) · Advanced Materials · doi:10.1002/adma.201405429 · Cited by 199
Light‐Emitting Organic Solar Cells Based on a 3D Conjugated System with Internal Charge Transfer
Cravino, A., Leriche, P., Alévêque, O., Roquet, S., & Roncali, J. (2006) · Advanced Materials · doi:10.1002/adma.200601230 · Cited by 186
Triphenylamine−Oligothiophene Conjugated Systems as Organic Semiconductors for Opto-Electronics
Cravino, A., Roquet, S., Alévêque, O., Leriche, P., Frère, P., & Roncali, J. (2006) · Chemistry of Materials · doi:10.1021/cm060257h · Cited by 177
Huang, J., Zhan, C., Zhang, X., Zhao, Y., Lu, Z., Jia, H., Jiang, B., Ye, J., Zhang, S., Tang, A., et al. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302896u · Cited by 168
Zhang, J., Deng, D., He, C., He, Y., Zhang, M., Zhang, Z.-G., Zhang, Z., & Li, Y. (2011) · Chemistry of Materials · doi:10.1021/cm102077j · Cited by 165
Bai, H., Wang, Y., Cheng, P., Wang, J., Wu, Y., Hou, J., & Zhan, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06004k · Cited by 159
Self-citationBai, H., Wang, Y., Cheng, P., Li, Y., Zhu, D., & Zhan, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501316y · Cited by 156
Self-citationHeteroannulated acceptors based on benzothiadiazole
Parker, T. C., Patel, D. G., Moudgil, K., Barlow, S. H., Risko, C. M., Brédas, J., Reynolds, J. R., & Marder, S. R. (2014) · Materials Horizons · doi:10.1039/c4mh00102h · Cited by 152
A Twisted Dimeric Perylene Diimide Electron Acceptor for Efficient Organic Solar Cells
Lin, Y., Wang, J., Dai, S., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400420 · Cited by 137
Self-citationRipaud, E., Rousseau, T., Leriche, P., & Roncali, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100065 · Cited by 109
Liu, K., Larsen‐Olsen, T. T., Lin, Y., Beliatis, M. J., Bundgaard, E., Jørgensen, M., Krebs, F. C., & Zhan, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07357j · Cited by 96
Self-citationRoll‐Coated Fabrication of Fullerene‐Free Organic Solar Cells with Improved Stability
Cheng, P., Bai, H., Zawacka, N. K., Andersen, T. R., Liu, W., Bundgaard, E., Jørgensen, M., Chen, H., Krebs, F. C., & Zhan, X. (2015) · Advanced Science · doi:10.1002/advs.201500096 · Cited by 95
Self-citationSmall‐Molecule Solar Cells with Fill Factors up to 0.75 via a Layer‐by‐Layer Solution Process
Lin, Y., Ma, L., Li, Y., Liu, Y., Zhu, D., & Zhan, X. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300626 · Cited by 94
Self-citationBai, H., Cheng, P., Wang, Y., Ma, L., Li, Y., Zhu, D., & Zhan, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13816j · Cited by 91
Self-citationLin, Y., Zhang, Z., Bai, H., Li, Y., & Zhan, X. (2012) · Chemical Communications · doi:10.1039/c2cc35333d · Cited by 74
Self-citationTang, A., Li, L., Lu, Z., Huang, J., Jia, H., Zhan, C., Tan, Z., Li, Y., & Yao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10640c · Cited by 70
Ambient roll-to-roll fabrication of flexible solar cells based on small molecules
Lin, Y., Dam, H. F., Andersen, T. R., Bundgaard, E., Fu, W., Chen, H., Krebs, F. C., & Zhan, X. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31708k · Cited by 61
Self-citationLiu, W., Liu, S., Zawacka, N. K., Andersen, T. R., Cheng, P., Fu, L., Chen, M., Fu, W., Bundgaard, E., Jørgensen, M., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04733h · Cited by 45
Self-citationOne, two and three-branched triphenylamine–oligothiophene hybrids for solution-processed solar cells
Lin, Y., Zhang, Z., Li, Y., Zhu, D., & Zhan, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10205j · Cited by 44
Self-citationA star-shaped electron acceptor based on 5,5′-bibenzothiadiazole for solution processed solar cells
Lin, Y., Wang, H., Li, Y., Zhu, D., & Zhan, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13747c · Cited by 40
Self-citationLiu, W., Shi, H., Andersen, T. R., Zawacka, N. K., Cheng, P., Bundgaard, E., Shi, M., Zhan, X., Krebs, F. C., & Chen, H. (2015) · RSC Advances · doi:10.1039/c5ra04336k · Cited by 26
Self-citation
Cited by
Non-fullerene acceptors for organic solar cells
Yan, C., Barlow, S., Wang, Z., Yan, H., Jen, A. K.-Y., Marder, S. R., & Zhan, X. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.3 · Cited by 2,710
Self-citationLi, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Self-citationA Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
Lin, Y., He, Q., Zhao, F., Huo, L., Mai, J., Lu, X., Su, C.-J., Li, T., Wang, J., Zhu, J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00853 · Cited by 945
Self-citationFused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Self-citation
Metadata
- Authors
- Lin, Y., & Zhan, X.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-05
- Volume
- 49
- Issue
- 2
- Pages
- 175-183
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2346370504
- Cited by
- 601
- References
- 52
- FWCI
- 49.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.