The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Oligomer Molecules for Efficient Organic Photovoltaics
Abstract
Solar cells, a renewable, clean energy technology that efficiently converts sunlight into electricity, are a promising long-term solution for energy and environmental problems caused by a mass of production and the use of fossil fuels. Solution-processed organic solar cells (OSCs) have attracted much attention in the past few years because of several advantages, including easy fabrication, low cost, lightweight, and flexibility. Now, OSCs exhibit power conversion efficiencies (PCEs) of over 10%. In the early stage of OSCs, vapor-deposited organic dye materials were first used in bilayer heterojunction devices in the 1980s, and then, solution-processed polymers were introduced in bulk heterojunction (BHJ) devices. Relative to polymers, vapor-deposited small molecules offer potential advantages, such as a defined molecular structure, definite molecular weight, easy purification, mass-scale production, and good batch-to-batch reproducibility. However, the limited solubility and high crystallinity of vapor-deposited small molecules are unfavorable for use in solution-processed BHJ OSCs. Conversely, polymers have good solution-processing and film-forming properties and are easily processed into flexible devices, whereas their polydispersity of molecular weights and difficulty in purification results in batch to batch variation, which may hamper performance reproducibility and commercialization. Oligomer molecules (OMs) are monodisperse big molecules with intermediate molecular weights (generally in the thousands), and their sizes are between those of small molecules (generally with molecular weights <1000) and polymers (generally with molecular weights >10000). OMs not only overcome shortcomings of both vapor-deposited small molecules and solution-processed polymers, but also combine their advantages, such as defined molecular structure, definite molecular weight, easy purification, mass-scale production, good batch-to-batch reproducibility, good solution processability, and film-forming properties. Therefore, OMs are a good choice for solution-processed reproducible OSCs toward scalable commercialized applications. Considerable efforts have been dedicated to developing new OM electron donors and electron acceptors for OSCs. So far, the highest PCEs of solution-processed OSCs based on OM donors and acceptors are 9-10% and 6-7%, respectively. OM materials have become promising alternatives to polymer and/or fullerene materials for efficient and stable OSCs. In this Account, we present a brief survey of the recent developments in solution-processable OM electron donors and acceptors and their application in OSCs. Rational design of OMs with star- and linear-shaped structures based on triphenylamine, benzodithiophene, and indacenodithiophene units and their impacts on device performance are discussed. Structure-property relationships are also proposed. Furthermore, the remaining challenges and the key research directions in the near future are also addressed. In the next years, an interdisciplinary approach involving novel OM materials, especially electron acceptor materials, accurate morphology optimization, and advanced device technologies will probably bring high-efficiency and stable OSCs to final commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Self-citationSynthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Rylene and Related Diimides for Organic Electronics
Zhan, X., Facchetti, A., Barlow, S., Marks, T. J., Ratner, M. A., Wasielewski, M. R., & Marder, S. R. (2011) · Advanced Materials · doi:10.1002/adma.201001402 · Cited by 1,773
Self-citationSmall molecule semiconductors for high-efficiency organic photovoltaics
Lin, Y., Li, Y., & Zhan, X. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15313k · Cited by 1,751
Self-citation
Cited by
Non-fullerene acceptors for organic solar cells
Yan, C., Barlow, S., Wang, Z., Yan, H., Jen, A. K.-Y., Marder, S. R., & Zhan, X. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.3 · Cited by 2,710
Self-citationLi, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Self-citationA Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
Lin, Y., He, Q., Zhao, F., Huo, L., Mai, J., Lu, X., Su, C.-J., Li, T., Wang, J., Zhu, J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00853 · Cited by 945
Self-citationFused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Self-citationBin, H., Zhang, Z.-G., Gao, L., Chen, S., Zhong, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01744 · Cited by 783
Morphology Control in Organic Solar Cells
Zhao, F., Wang, C., & Zhan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703147 · Cited by 630
Self-citationSolution-processed organic tandem solar cells with power conversion efficiencies >12%
Li, M., Gao, K., Wan, X., Zhang, Q., Kan, B., Xia, R., Liu, F., Yang, X., Feng, H., Ni, W., et al. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.240 · Cited by 548
Triarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells
Wang, J., Liu, K., Ma, L., & Zhan, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00432 · Cited by 536
Self-citationOrganic Semiconductors based on Dyes and Color Pigments
Gsänger, M., Bialas, D., Huang, L., Stolte, M., & Würthner, F. (2016) · Advanced Materials · doi:10.1002/adma.201505440 · Cited by 467
Wang, W., Yan, C., Lau, T., Wang, J., Liu, K., Fan, Y., Lu, X., & Zhan, X. (2017) · Advanced Materials · doi:10.1002/adma.201701308 · Cited by 421
Self-citationMapping Polymer Donors toward High‐Efficiency Fullerene Free Organic Solar Cells
Lin, Y., Zhao, F., Wu, Y., Chen, K., Xia, Y., Li, G., Prasad, S. K. K., Zhu, J., Huo, L., Bin, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604155 · Cited by 403
Self-citationEffect of Isomerization on High-Performance Nonfullerene Electron Acceptors
Wang, J., Zhang, J., Xiao, Y., Xiao, T., Zhu, R., Yan, C., Fu, Y., Lu, G., Lu, X., Marder, S. R., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04027 · Cited by 400
Self-citationLi, T., Dai, S., Ke, Z., Yang, L., Wang, J., Yan, C., Ma, W., & Zhan, X. (2018) · Advanced Materials · doi:10.1002/adma.201705969 · Cited by 384
Self-citationDai, S., Li, T., Wang, W., Xiao, Y., Lau, T., Li, Z., Liu, K., Lu, X., & Zhan, X. (2018) · Advanced Materials · doi:10.1002/adma.201706571 · Cited by 354
Self-citationChen, S., Liu, Y., Zhang, L., Chow, P. C. Y., Wang, Z., Zhang, G., Ma, W., & Yan, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01606 · Cited by 348
Non-fullerene small molecule acceptors based on perylene diimides
Liu, Z., Wu, Y., Zhang, Q., & Gao, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06978a · Cited by 316
Liu, F., Zhou, Z., Zhang, C., Zhang, J., Hu, Q., Vergote, T., Liu, F., Russell, T. P., & Zhu, X. (2017) · Advanced Materials · doi:10.1002/adma.201606574 · Cited by 288
New Wide Band Gap Donor for Efficient Fullerene-Free All-Small-Molecule Organic Solar Cells
Yang, L., Zhang, S., He, C., Zhang, J., Yao, H., Yang, Y., Zhang, Y., Zhao, W., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11612 · Cited by 279
Enhancing Performance of Nonfullerene Acceptors via Side‐Chain Conjugation Strategy
Wang, J., Wang, W., Wang, X., Wu, Y., Zhang, Q., Yan, C., Ma, W., You, W., & Zhan, X. (2017) · Advanced Materials · doi:10.1002/adma.201702125 · Cited by 274
Self-citationSong, X., Gasparini, N., Ye, L., Yao, H., Hou, J., Ade, H., & Baran, D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01266 · Cited by 266
Zhan, C., & Yao, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04339 · Cited by 261
Fused‐Ring Acceptors with Asymmetric Side Chains for High‐Performance Thick‐Film Organic Solar Cells
Feng, S., Zhang, C., Liu, Y., Bi, Z., Zhang, Z., Xu, X., Ma, W., & Bo, Z. (2017) · Advanced Materials · doi:10.1002/adma.201703527 · Cited by 261
Gao, L., Zhang, Z., Bin, H., Xue, L., Yang, Y., Wang, C., Liu, F., Russell, T. P., & Li, Y. (2016) · Advanced Materials · doi:10.1002/adma.201601595 · Cited by 260
Arrechea, S., Aljarilla, A., de la Cruz, P., Palomares, E., Sharma, G. D., & Langa, F. (2016) · Nanoscale · doi:10.1039/c6nr06374h · Cited by 27
Metadata
- Authors
- Lin, Y., & Zhan, X.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-05
- Volume
- 49
- Issue
- 2
- Pages
- 175-183
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2346370504
- Cited by
- 601
- References
- 52
- FWCI
- 49.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.