The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Innovative Electrolytes Based on Ionic Liquids and Polymers for Next-Generation Solid-State Batteries
Open accessAbstract
Electrolytes based on organic solvents used in current Li-ion batteries are not compatible with the next-generation energy storage technologies including those based on Li metal. Thus, there has been an increase in research activities investigating solid-state electrolytes, ionic liquids (ILs), polymers, and combinations of these. This Account will discuss some of the work from our teams in these areas. Similarly, other metal-based technologies including Na, Mg, Zn, and Al, for example, are being considered as alternatives to Li-based energy storage. However, the materials research required to effectively enable these alkali metal based energy storage applications is still in its relative infancy. Once again, electrolytes play a significant role in enabling these devices, and research has for the most part progressed along similar lines to that in advanced lithium technologies. Some of our recent contributions in these areas will also be discussed, along with our perspective on future directions in this field. For example, one approach has been to develop single-ion conductors, where the anion is tethered to the polymer backbone, and the dominant charge conductor is the lithium or sodium countercation. Typically, these present with low conductivity, whereas by using a copolymer approach or incorporating bulky quaternary ammonium co-cations, the effective charge separation is increased thus leading to higher conductivities and greater mobility of the alkali metal cation. This has been demonstrated both experimentally and via computer simulations. Further enhancements in ion transport may be possible in the future by designing and tethering more weakly associating anions to the polymer backbone. The second approach considers ion gels or composite polymer electrolytes where a polymerized ionic liquid is the matrix that provides both mechanical robustness and ion conducting pathways. The block copolymer approach is also demonstrated, in this case, to simultaneously provide mechanical properties and high ionic conductivity when used in combination with ionic-liquid electrolytes. The ultimate electrolyte material that will enable all high-performance solid-state batteries will have ion transport decoupled from the mechanical properties. While inorganic conductors can achieve this, their rigid, brittle nature creates difficulties. On the other hand, ionic polymers and their composites provide a rich area of chemistry to design and tune high ionic conductivity together with ideal mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Single lithium-ion conducting solid polymer electrolytes: advances and perspectives
Zhang, H., Li, C., Piszcz, M., Coya, E., Rojo, T., Rodriguez-Martinez, L. M., Armand, M., & Zhou, Z. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00491a · Cited by 1,187
Beyond PEO—Alternative host materials for Li + -conducting solid polymer electrolytes
Mindemark, J., Lacey, M. J., Bowden, T., & Brandell, D. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.12.004 · Cited by 1,143
Superconcentrated electrolytes for a high-voltage lithium-ion battery
Wang, J., Yamada, Y., Sodeyama, K., Chiang, C. H., Tateyama, Y., & Yamada, A. (2016) · Nature Communications · doi:10.1038/ncomms12032 · Cited by 1,059
Review—Superconcentrated Electrolytes for Lithium Batteries
Yamada, Y., & Yamada, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041514jes · Cited by 821
Macromolecules in Ionic Liquids: Progress, Challenges, and Opportunities
Ueki, T., & Watanabe, M. (2008) · Macromolecules · doi:10.1021/ma800171k · Cited by 659
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Zheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Recent Advances in Electrolytes for “Beyond Aqueous” Zinc‐Ion Batteries
Lv, Y., Xiao, Y., Ma, L., Zhi, C., & Chen, S. (2022) · Advanced Materials · doi:10.1002/adma.202106409 · Cited by 504
Reducing the thickness of solid-state electrolyte membranes for high-energy lithium batteries
Wu, J., Yuan, L., Zhang, W., Li, Z., Xie, X., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02241a · Cited by 425
Ultra-stable all-solid-state sodium metal batteries enabled by perfluoropolyether-based electrolytes
Wang, X., Zhang, C., Sawczyk, M., Sun, J., Yuan, Q., Chen, F., Mendes, T. C., Howlett, P. C., Fu, C., Wang, Y., et al. (2022) · Nature Materials · doi:10.1038/s41563-022-01296-0 · Cited by 351
Self-citationThe green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
Energy Applications of Ionic Liquids: Recent Developments and Future Prospects
Zhou, T., Gui, C., Sun, L., Hu, Y., Lyu, H., Wang, Z., Song, Z., & Yu, G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00391 · Cited by 305
Wang, X., Kerr, R., Chen, F., Goujon, N., Pringle, J. M., Mecerreyes, D., Forsyth, M., & Howlett, P. C. (2020) · Advanced Materials · doi:10.1002/adma.201905219 · Cited by 298
Self-citationEutectic Electrolytes as a Promising Platform for Next-Generation Electrochemical Energy Storage
Zhang, C., Zhang, L., & Yu, G. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00360 · Cited by 279
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Van Mierlo, J., Berecibar, M., El Baghdadi, M., De Cauwer, C., Messagie, M., Coosemans, T., Jacobs, V., & Hegazy, O. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12010020 · Cited by 149
Metadata
- Authors
- Forsyth, M., Porcarelli, L., Wang, X., Goujon, N., & Mecerreyes, D.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-25
- Volume
- 52
- Issue
- 3
- Pages
- 686-694
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2915968701
- Cited by
- 399
- References
- 31
- FWCI
- 16.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.