Intermetallic Nanoparticles: Synthetic Control and Their Enhanced Electrocatalysis
The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Abstract
Conspectus Intermetallic nanoparticles (NPs) described in this Account are a class of metallic alloy NPs within which metal atoms are bonded via strong d- orbital interaction and ordered anisotropically in a specific crystallographic direction. Compared to the common metallic alloy NPs with solid solution structure, intermetallic NPs are generally more stable against chemical oxidation and etching. The strict stoichiometry requirement, well-defined atom binding environment and layered atomic arrangement also make intermetallic NPs an ideal model for understanding their physical and catalytic properties. This account summarizes the synthetic principles and strategies developed to obtain monodisperse intermetallic NPs, especially tetragonal L1 0 -NPs. The thermodynamics and kinetics involved in the conversion between disordered and ordered structures are briefly discussed. The synthetic methods are grouped into two slightly different categories: solution-phase synthesis followed by solid state annealing and direct solution-phase synthesis. In the former method, high-surface-area supports are often needed to disperse NPs and to prevent them from aggregation, while in the latter method such supports are not required since the structure conversion temperature is lowered to a level that the conversion can proceed in the solution reaction condition. In any of these two synthetic approaches, various factors influencing intermetallic structure formation should be carefully controlled to ensure more complete structural transition within NPs. Using representative synthetic examples, we highlight the strategies explored to facilitate the formation of intermetallic structure, including the introduction of vacancies/defects within NP structures and the control of atom addition rate/seed-mediated diffusion to lower the energy barrier. These strategies illustrate how the concept of thermodynamics and kinetics can be used to design the synthesis of intermetallic NPs. Additionally, to correlate NP structure and catalysis, we introduce briefly the d -band theory to explain how the electronic, strain and ensemble effects can be used to tune NP catalysis. We focus specifically on Pt-, Pd-, and Au-based L1 0 -NPs and demonstrate how these L1 0 -NPs could be prepared to show much enhanced catalysis for electrochemical reactions, including oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), formic acid oxidation reaction (FAOR), and thermo-oxidation reaction of CO. Due to the enhanced metal atom stability in the “sandwich”-type structure, the roles of the first-row transition metal atoms in catalysis are better understood to achieve catalysis optimization. This concept can be extended to other alloy NPs, demonstrating great potentials in using intermetallic structures to control NP reduction and oxidation catalysis for important chemical and energy applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Monodisperse FePt Nanoparticles and Ferromagnetic FePt Nanocrystal Superlattices
Sun, S., Murray, C. B., Weller, D., Folks, L., & Moser, A. (2000) · Science · doi:10.1126/science.287.5460.1989 · Cited by 6,137
Self-citationImproved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Towards the computational design of solid catalysts
Nørskov, J. K., Bligaard, T., Rossmeisl, J., & Christensen, C. H. (2009) · Nature Chemistry · doi:10.1038/nchem.121 · Cited by 4,161
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Wang, D., Xin, H. L., Hovden, R., Wang, H., Yu, Y., Muller, D. A., DiSalvo, F. J., & Abruña, H. D. (2013) · Nature Materials · doi:10.1038/nmat3458 · Cited by 2,082
Biaxially strained PtPb/Pt core/shell nanoplate boosts oxygen reduction catalysis
Bu, L., Zhang, N., Guo, S., Zhang, X., Li, J., Yao, J., Wu, T., Lu, G., Ma, J.-Y., Su, D., et al. (2016) · Science · doi:10.1126/science.aah6133 · Cited by 1,642
Self-citationMesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
Green chemistry for nanoparticle synthesis
Duan, H., Wang, D., & Li, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00363b · Cited by 1,239
Research works printed but not linked: 2
- Glicksman M., 1999, Diffusion in solids: field theory, solid-state principles, and applications
- Hammer B., 2000, Advances in catalysis, 45, 71
Cited by
Items 301–352 of 352
Garstenauer, D., Zobač, O., Jirsa, F., Kleitz, F., & Richter, K. W. (2025) · Catalysts · doi:10.3390/catal15040368 · Cited by 3
Zhang, L., Masood, Z., Gao, Q., Kang, M., Wei, X., Zhang, Y., Guo, Z., Chen, Y., Ma, L., Zhu, H., et al. (2025) · Chem Catalysis · doi:10.1016/j.checat.2025.101492 · Cited by 8
Takayama, T., Takasuka, S., Harashima, Y., & Fujii, M. (2025) · ChemElectroChem · doi:10.1002/celc.202500151 · Cited by 2
Strain engineering of heterogeneous catalysts for oxygen reduction reaction
Zhao, Y., Yu, H., Tang, J., Li, Y., Yong, X., Tu, X., & Wang, J. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111997 · Cited by 3
Liu, H., Song, Q., Xie, Y., Zhang, W., Xu, Q., & Su, H. (2025) · Catalysts · doi:10.3390/catal15111070 · Cited by 2
Zhang, S., Li, Q., Liu, S., Luo, J., Gu, Y., Liu, X., Liu, F., Tan, P., & Pan, J. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c21428 · Cited by 2
Miao, J., 王, 珙., Jiang, J., Li, X., Sun, X., & Xu, C. (2026) · Nano Research · doi:10.26599/nr.2026.94908728 · Cited by 2
Zhao, Y., Zhang, S. H., Zhong, M., Gao, M., & Lu, X. (2026) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2026.126881 · Cited by 3
Fang, Z., & Wu, J. (2026) · ACS Nano · doi:10.1021/acsnano.6c03081 · Cited by 2
Ma, D., Huo, X., Chen, M., Chen, J. K., & Lai, C. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101782 · Cited by 2
Wang, Y., Lü, Y., & Xu, X. (2024) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2024.124775 · Cited by 2
Zhang, B., & Yu, Y. (2024) · Transactions of Tianjin University · doi:10.1007/s12209-024-00422-0 · Cited by 2
“Moreover, the strong atomic interactions in IMCs suppress atomic migration during catalytic reactions in acidic or alkaline electrolytes, affording these catalysts with remarkable structural stability [6–11].”
Colloidal High Entropy Alloy Nanoparticles: Synthetic Strategies and Electrocatalytic Properties
Ziehl, T. J., & Zhang, P. (2025) · ChemPhysChem · doi:10.1002/cphc.202400853 · Cited by 2
Kastsova, A. G., Krasnova, A. O., Glebova, N. V., Pelageikina, A. O., & Nechitailov, A. A. (2025) · Russian Chemical Reviews · doi:10.59761/rcr5135 · Cited by 2
Boski, D. J., Ross, R. C., & Hernández-Pagán, E. A. (2025) · Chemistry of Materials · doi:10.1021/acs.chemmater.5c01494 · Cited by 1
Zoubi, W. A., Allaf, A. W., Aljohani, K., & Park, N. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta06975k · Cited by 2
Jiang, Y., Qiu, Z., Yuan, K., Zhou, K., & Yun, Q. (2026) · Aggregate · doi:10.1002/agt2.70263 · Cited by 1
“Moreover, compared to alloys, IMCs have higher mixing enthalpy and stronger atomic interaction between different elemental atoms, resulting in higher chemical and structural stability [ 28, 29 ].”
Wei, N., Miao, Y., Sun, J., Xing, Z., Yin, C., & Wang, J. (2026) · Chemical Physics Letters · doi:10.1016/j.cplett.2026.142671 · Cited by 1
Lu, J., Campos‐Roldàn, C. A., Merzdorf, T., Wang, X., Pan, L., Nong, H. N., Firschke, F., Selve, S., Drnec, J., Jones, D. J., et al. (2026) · ACS Energy Letters · doi:10.1021/acsenergylett.6c00542 · Cited by 1
Chang, L., Wang, Q., Zhao, D., Cheng, Q., Wang, Q., & Pei, W. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta00952b · Cited by 1
Lu, W., Wang, S., Xu, Y., Zhong, J., Wang, X., Zhao, K., Gao, Y., & Wang, F.-C. (2026) · ACS Applied Nano Materials · doi:10.1021/acsanm.6c01050 · Cited by 1
Wang, K., Ni, C., Huang, J., Huang, Y., Cao, X., Ma, J., Shi, X., & Guo, R. (2026) · Biomaterials Science · doi:10.1039/d6bm00208k · Cited by 1
Chen, Y., Ma, Y., Zhu, Q., Li, H., & Zhang, J. (2026) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2026.06.040 · Cited by 2
Zhang, B., Zhou, X., Wu, Z., Huang, J., Bai, L., Li, Z., Wang, X., & Sun, M. B. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c01572 · Cited by 3
Jain, G. M., Kolluru, S., Reddy, L. E., Gollapudi, D., & Ramesh, G. V. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.04.178
Heterobimetallic complexes and intermetallic materials
Daniels, C. L. (2021) · doi:10.31274/td-20240329-382
Cai, L., Yang, Z., Liu, T., Jin, N., Cao, Y., Yun, J., Zhang, J., & Zhao, H. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4884867
Aromaticity, Supramolecular Stacks, and Luminescence Properties of Cyclic Trinuclear Complexes
Lü, Z. (2022) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc2048660
Mpofu, P., Malatji, N., Shongwe, M. B., & Kanyane, L. R. (2025) · Metallography Microstructure and Analysis · doi:10.1007/s13632-025-01211-4
“At high temperatures, the production of coarse grains and secondary phases (such as brittle intermetallic compounds) may limit the alloy's capacity to create a continuous, protective passive oxide layer [31, 32].”
Попова, А. Н., Zakharov, N. S., Zakharov, Y. A., Parshkova, E. S., Тихонова, И. Н., Пугачев, В. М., & Иванович, К. В. (2025) · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · doi:10.1134/s1027451025700818
Hu, Z., Luo, X., Jiang, H., Zhu, Y., Shen, J., Jiang, H., & Li, C. (2026) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2026.126921
Garstenauer, D., Sallfeldner, L., Zobač, O., Jirsa, F., & Richter, K. W. (2026) · Catalysts · doi:10.3390/catal16050459
Lee, E. H., Baik, J., Kang, J. S., & Yoo, S. J. (2026) · ChemSusChem · doi:10.1002/cssc.202502709
“Depending on the degree and type of ordering, various ordered phases such as A1 (fcc), L1 0 , L1 2 , B2 (bcc type), B11, and B35 (hcp type) can be formed [35] (Figure 2b) [28].”
Mondal, S., & Peter, S. C. (2026) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6c00106
Research Progress in Catalytic Dehydrogenation of Liquid Organic Hydrogen Carriers
Meng, X., Sun, P., & Peng, C. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c05413 · Cited by 1
Gan, Z., Chen, Z., Qiu, P., Cao, J., Bai, J., Feng, J., Chen, Z., Deng, C., Shu, C., & Tang, W. (2026) · Energy Materials · doi:10.20517/energymater.2025.130
Zhao, M., Li, D., Liu, H., Lv, Y., Hou, H., Guo, J., Wang, C., Sun, S., He, D., Lei, Y., et al. (2026) · ACS Catalysis · doi:10.1021/acscatal.6c04035
Self-citationHu, X., Geng, S., Cao, Y., Jiang, K., Liu, Y., Li, R., Zhang, Y., Meng, S., Zhu, S., Bu, L., et al. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.6989052
Hu, X., Geng, S., Cao, Y., Jiang, K., Liu, Y., Li, R., Zhang, Y., Meng, S., Zhu, S., Bu, L., et al. (2026) · Angewandte Chemie · doi:10.1002/ange.6989052
Agharezaei, P., & Ghuman, K. K. (2026) · arXiv (Cornell University) · doi:10.48550/arxiv.2607.17463
Li, W., Liu, Y., Zou, X., & An, L. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-36638-3.00002-4
Cao, D., Zhang, M., Wang, H. B., Zhang, Y., Luo, F., Yang, Z., Qin, R., & Zheng, N. (2026) · Small · doi:10.1002/smll.74717
Ferroelectric Catalysts in the Hydrogen Evolution Reaction: A Perspective
Lu, R., Meng, W., Cheng, Z., Hart, J. N., Ferry, M., Li, S., & Li, W. (2026) · Advanced Science · doi:10.1002/advs.76739
“These candidate materials can be broadly classified into the following four categories: (i) non-precious metal compounds [ 6, 31–42 ], (ii) intermetallic compounds [ 43–45 ], (iii) carbon-based materials [ 25, 46–49 ], and (iv) emerging advanced materials [ 50–63 ].”
Chen, C., Liu, Y., Ruan, C., Guo, B., Liu, T., Zhang, X., Huang, Q., Amiinu, I. S., Abass, K. S., & Pu, Z. (2026) · Small · doi:10.1002/smll.75290
Ye, S., Li, J., Zhang, Y., Wei, X., Zeng, W., Wu, S., Dong, X., Zhu, Y., Wei, Y., Hu, J., et al. (2026) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2026.09.001
Self-citationKo, M., Kwon, D. H., Kwon, D., Jeong, S., Kim, J., Kwak, S.-H., Kim, J., Cho, S., Yuk, S., Kim, J. T., et al. (2026) · Small · doi:10.1002/smll.75814
Theoretical insights into intermetallic compound surfaces in hydrogen-involving catalytic reactions
Tsaturyan, A. A., Brix, F., Kandaskalov, D., & Gaudry, É. (2026) · Surface Science Reports · doi:10.1016/j.surfrep.2026.100697
Sheoran, A., Li, J., Ishfaq, I., Ahmad, Z., Liu, W., & Saleem, F. (2026) · Chemistry - An Asian Journal · doi:10.1002/asia.71010
Self-citationLong‐Range Atomic Periodicity Unlocks Durable Water Electrolysis
Wang, S., Shi, Y., Li, H., Shen, T., Kong, W., Wang, G., Wang, K., Lu, Z., Yuan, R., Li, G., et al. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.2858393
Long‐Range Atomic Periodicity Unlocks Durable Water Electrolysis
Wang, S., Shi, Y., Li, H., Shen, T., Kong, W., Wang, G., Wang, K., Lu, Z., Yuan, R., Li, G., et al. (2026) · Angewandte Chemie · doi:10.1002/ange.2858393
Tuning the Electronic Structure of FeCoNiCuMn High-Entropy Alloys by Ni Content for CO2 Methanation
Tian, H., Liu, W., Liu, J., Zhang, H., Chen, W., Zha, F., Zhang, Z., & Chen, H. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c07640
High-entropy intermetallics for electrocatalysis: Harnessing enthalpy–entropy trade-off
Hu, H., Huang, J., Wang, K., Jin, B., Li, Y., & Wang, D. (2026) · eScience · doi:10.1016/j.esci.2026.100652
Metadata
- Authors
- Li, J., & Sun, S.
- Affiliations
- Brown University (US)
- Corresponding author
- Sun, Shouheng
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-28
- Volume
- 52
- Issue
- 7
- Pages
- 2015-2025
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2954170006
- Cited by
- 354
- References
- 74
- Citations by year
- 2026: 42 · 2025: 63 · 2024: 57 · 2023: 60 · 2022: 60 · 2021: 40 · 2020: 28 · 2019: 4
- FWCI
- 7.03
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Accounts of Chemical Research (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Energy Efficiency and Renewable Energy
- Army Research Laboratory (W911NF-11-1-0353)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Materials Science › Materials Chemistry › Chemical and Physical Properties of Materials
- Keywords
- intermetallic nanoparticles, nanoparticle synthesis, wet chemical synthesis, solid-state annealing, d-band theory, electrocatalysis, oxygen reduction reaction, hydrogen evolution reaction, formic acid oxidation, CO oxidation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.