The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Green Approach for Ultratrace Determination of Divalent Metal Ions and Arsenic Species Using Total-Reflection X-ray Fluorescence Spectrometry and Mercapto-Modified Graphene Oxide Nanosheets as a Novel Adsorbent
Abstract
A new method based on dispersive microsolid phase extraction (DMSPE) and total-reflection X-ray fluorescence spectrometry (TXRF) is proposed for multielemental ultratrace determination of heavy metal ions and arsenic species. In the developed methodology, the crucial issue is a novel adsorbent synthesized by grafting 3-mercaptopropyl trimethoxysilane on a graphene oxide (GO) surface. Mercapto-modified graphene oxide (GO-SH) can be applied in quantitative adsorption of cobalt, nickel, copper, cadmium, and lead ions. Moreover, GO-SH demonstrates selectivity toward arsenite in the presence of arsenate. Due to such features of GO-SH nanosheets as wrinkled structure and excellent dispersibility in water, GO-SH seems to be ideal for fast and simple preconcentration and determination of heavy metal ions using methodology based on DMSPE and TXRF measurement. The suspension of GO-SH was injected into an analyzed water sample; after filtration, the GO-SH nanosheets with adsorbed metal ions were redispersed in a small volume of internal standard solution and deposited onto a quartz reflector. The high enrichment factor of 150 allows obtaining detection limits of 0.11, 0.078, 0.079, 0.064, 0.054, and 0.083 ng mL(-1) for Co(II), Ni(II), Cu(II), As(III), Cd(II), and Pb(II), respectively. Such low detection limits can be obtained using a benchtop TXRF system without cooling media and gas consumption. The method is suitable for the analysis of water, including high salinity samples difficult to analyze using other spectroscopy techniques. Moreover, GO-SH can be applied to the arsenic speciation due to its selectivity toward arsenite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Liu, L., Li, C., Bao, C., Jia, Q., Xiao, P., Liu, X., & Zhang, Q. (2012) · Talanta · doi:10.1016/j.talanta.2012.02.051 · Cited by 408
Graphene as a new sorbent in analytical chemistry
Sitko, R., Zawisza, B., & Malicka, E. (2013) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2013.05.011 · Cited by 373
Self-citationZhang, Y., Chi, H., Zhang, W., Sun, Y., Liang, Q., Gu, Y., & Jing, R. (2014) · Nano-Micro Letters · doi:10.1007/bf03353772 · Cited by 126
Cited by
Bansod, B., Kumar, T., Thakur, R., Rana, S., & Singh, I. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.03.031 · Cited by 1,069
Detection and removal of heavy metal ions: a review
Malik, L. A., Bashir, A., Qureashi, A., & Pandith, A. H. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00891-z · Cited by 904
Chemical sensing with 2D materials
Anichini, C., Czepa, W., Pakulski, D., Aliprandi, A., Ciesielski, A., & Samorì, P. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00417j · Cited by 756
Development of dispersive micro-solid phase extraction based on micro and nano sorbents
Khezeli, T., & Daneshfar, A. (2017) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2017.01.004 · Cited by 327
Green sample preparation strategies for organic/inorganic compounds in environmental samples
Cerutti, S., Pacheco, P. H., Gil, R., & Martinez, L. D. (2019) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.08.007 · Cited by 32
Metadata
- Authors
- Sitko, R., Janik, P., Zawisza, B., Talik, E., Margui, E., & Queralt, I.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-02
- Volume
- 87
- Issue
- 6
- Pages
- 3535-3542
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2025740977
- Cited by
- 233
- References
- 4
- FWCI
- 18.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.