The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Multilayered Perovskite Materials Based on Polymeric-Ammonium Cations for Stable Large-Area Solar Cell
Abstract
Despite the dramatic rise in power conversion efficiencies (PCEs) of perovskite solar cells (PeSCs), concerns surrounding the long-term stability as well as the poor reproducibility in the archetypal three-dimensional (3D) perovskite, MAPbI 3 (MA = CH 3 NH 3 ), have the potential to derail commercialization. We have reported the fabrication and properties of a series of 2D perovskite compounds (PEI) 2 (MA) n −1 Pb n I 3 n +1 ( n = 3, 5, 7) by incorporating polyethylenimine (PEI) cations within the layered structure. The benefits of using intercalated polymer cations in the multilayered films are multiple: moisture resistance and film quality are greatly enhanced compared to that of their 3D MAPbI 3 analogue; charge transport within solar cells can also be improved compared to that of 2D materials using small-molecule bulky ammonium. The moisture-stable nature of the multilayered perovskite materials allow for the simple one-step fabrication of cells with an aperture area of 2.32 cm 2 under ambient humidity that have a PCE up to 8.77%. Overall, the 2D perovskite family offers rich multitudes of substituent and crystal structures, defining a promising class of stable and efficient light-absorbing materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Cited by
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Quantum and Dielectric Confinement Effects in Lower-Dimensional Hybrid Perovskite Semiconductors
Katan, C., Mercier, N., & Even, J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00417 · Cited by 864
Ren, H., Yu, S., Chao, L., Xia, Y., Sun, Y., Zuo, S., Li, F., Niu, T., Yang, Y., Ju, H., et al. (2020) · Nature Photonics · doi:10.1038/s41566-019-0572-6 · Cited by 578
Self-citation
Metadata
- Authors
- Yao, K., Wang, X., Xu, Y.-X., Li, F., & Zhou, L.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-22
- Volume
- 28
- Issue
- 9
- Pages
- 3131-3138
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2340602524
- Cited by
- 199
- References
- 2
- FWCI
- 16.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.