The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
High Temperature Proton Conduction in Nanocellulose Membranes: Paper Fuel Cells
Abstract
Polymer electrolyte membrane fuel cells are an efficient and clean alternative power source, but high cost impedes widespread commercialization. The fuel cell membrane, e.g., Nafion, contributes significantly to this cost, and therefore, novel alternatives are required. Temperature is also an important factor; high temperature operation leads to faster reaction kinetics, lower electrocatalyst loading, and improved water management, thereby further reducing cost. However, higher temperature puts greater demands on the membrane. Conductivity is related strongly to humidification, and therefore, this generally decreases above 100 °C. Nanocellulose membranes for fuel cells in which the proton conductivity increases up to 120 °C are reported here for the first time. The hydrogen barrier properties are far superior to conventional ionomer membranes. Fuel cells with nanocellulose membranes are successfully operated at 80 °C. Additionally, these membranes are environmentally friendly and biodegradable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose
DONG, X. M., REVOL, J.-F., & GRAY, D. G. (1998) · Cellulose · doi:10.1023/a:1009260511939 · Cited by 1,032
Cited by
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane
Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M., & Griesser, T. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.136 · Cited by 366
An overview of proton exchange membranes for fuel cells: Materials and manufacturing
Ahmad, S., Nawaz, T., Ali, A., Orhan, M. F., Samreen, A., & Kannan, A. M. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.04.099 · Cited by 336
Metadata
- Authors
- Bayer, T., Cunning, B. V., Selyanchyn, R., Nishihara, M., Fujikawa, S., Sasaki, K., & Lyth, S. M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-30
- Volume
- 28
- Issue
- 13
- Pages
- 4805-4814
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2461921020
- Cited by
- 195
- References
- 4
- FWCI
- 6.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High Temperature Proton Conduction in Nanocellulose Membranes: Paper Fuel Cells. https://app.cochat.ai/papers/10.1021/acs.chemmater.6b01990
- The paper
- Bayer, T., Cunning, B. V., Selyanchyn, R., Nishihara, M., Fujikawa, S., Sasaki, K., & Lyth, S. M. (2016). High Temperature Proton Conduction in Nanocellulose Membranes: Paper Fuel Cells. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.6b01990
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.