The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Lithium Extraction Mechanism in Li-Rich Li2MnO3 Involving Oxygen Hole Formation and Dimerization
Abstract
Lithium-rich oxide electrodes with layered structures have attracted considerable interest because they can deliver high energy densities for lithium-ion batteries. However, there is significant debate regarding their redox chemistry. It is apparent that the mechanism of lithium extraction from lithium-rich Li 2 MnO 3 is not fully understood, especially in relation to the observed O 2 evolution and structural transformation. Here, delithiation and kinetic processes in Li 2 MnO 3 are investigated using ab initio simulation techniques employing high level hybrid functionals as they reproduce accurately the electronic structure of oxygen hole states. We show that Li extraction is charge-compensated by oxidation of the oxide anion, so that the overall delithiation reaction involves lattice oxygen loss. Localized holes on oxygen (O – ) are formed as the first step but are not stable leading to oxygen dimerization (with O–O ∼ 1.3 Å) and eventually to the formation of molecular O 2 . Oxygen dimerization facilitates Mn migration onto octahedral sites in the vacated lithium layers. The results suggest that reversible oxygen redox without major structural changes is only possible if the localized oxygen holes are stabilized and oxygen dimerization suppressed. Such an understanding is important for the future optimization of new lithium-rich cathode materials for high energy density batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2204597 · Cited by 5,288
Toward the rational design of non-precious transition metal oxides for oxygen electrocatalysis
Hong, W. T., Risch, M., Stoerzinger, K. A., Grimaud, A., Suntivich, J., & Shao-Horn, Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03869j · Cited by 2,089
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
The stability of ionic crystal surfaces
Tasker, P. W. (1979) · Journal of Physics C: Solid State Physics · doi:10.1088/0022-3719/12/22/036 · Cited by 1,822
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Seo, D.-H., Lee, J., Urban, A., Malik, R., Kang, S., & Ceder, G. (2016) · Nature Chemistry · doi:10.1038/nchem.2524 · Cited by 1,561
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Self-citationLu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1480014 · Cited by 1,016
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
McCalla, E., Abakumov, A. M., Saubanère, M., Foix, D., Berg, E. J., Rousse, G., Doublet, M.-L., Gonbeau, D., Novák, P., Van Tendeloo, G., et al. (2015) · Science · doi:10.1126/science.aac8260 · Cited by 854
Eames, C., & Islam, M. S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508154e · Cited by 688
Self-citationA perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries
Manthiram, A., Chemelewski, K., & Lee, E.-S. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42981d · Cited by 625
Role of self-trapping in luminescence andp-type conductivity of wide-band-gap oxides
Varley, J. B., Janotti, A., Franchini, C., & Van de Walle, C. G. (2012) · Physical Review B · doi:10.1103/physrevb.85.081109 · Cited by 620
The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries
Saubanère, M., McCalla, E., Tarascon, J.-M., & Doublet, M.-L. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03048j · Cited by 595
Electrochemical Activities in Li[sub 2]MnO[sub 3]
Yu, D. Y. W., Yanagida, K., Katô, Y., & Nakamura, H. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3110803 · Cited by 383
Chevrier, V. L., Ong, S. P., Armiento, R., Chan, M. K. Y., & Ceder, G. (2010) · Physical Review B · doi:10.1103/physrevb.82.075122 · Cited by 358
Franchini, C., Podloucky, R., Paier, J., Marsman, M., & Kresse, G. (2007) · Physical Review B · doi:10.1103/physrevb.75.195128 · Cited by 350
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
The lithium intercalation process in the low-voltage lithium battery anode Li1+xV1−xO2
Armstrong, A. R., Lyness, C., Panchmatia, P. M., Islam, M. S., & Bruce, P. G. (2011) · Nature Materials · doi:10.1038/nmat2967 · Cited by 292
Self-citationDensity Functional Investigation on Li2MnO3
Xiao, R., Li, H., & Chen, L. (2012) · Chemistry of Materials · doi:10.1021/cm3027219 · Cited by 275
Ye, D., Zeng, G., Nogita, K., Ozawa, K., Hankel, M., Searles, D. J., & Wang, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503276 · Cited by 188
Study of the electrochemical behavior of the “inactive” Li2MnO3
Amalraj, S. F., Markovsky, B., Sharon, D., et al. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.05.144 · Cited by 143
Muhammad, S., Kim, H., Kim, Y., Kim, D., Song, J. H., Yoon, J., Park, J.-H., Ahn, S.-J., Kang, S., Thackeray, M. M., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.12.027 · Cited by 142
van der Waals Interactions in Layered Lithium Cobalt Oxides
Aykol, M., Kim, S., & Wolverton, C. M. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06240 · Cited by 136
Ambivalent Effect of Oxygen Vacancies on Li2MnO3: A First-Principles Study
Okamoto, Y. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.079202jes · Cited by 114
First-Cycle Evolution of Local Structure in Electrochemically Activated Li2MnO3
Croy, J. R., Park, J. S., Doğan, F., Johnson, C. S., Key, B., & Balasubramanian, M. (2014) · Chemistry of Materials · doi:10.1021/cm5039792 · Cited by 95
Hoang, K. (2015) · Physical Review Applied · doi:10.1103/physrevapplied.3.024013 · Cited by 81
The meaning of the oxygen second-electron affinity and oxide potential models
Harding, J. H., & Pyper, N. C. (1995) · Philosophical Magazine Letters · doi:10.1080/09500839508241003 · Cited by 76
Cited by
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Gent, W. E., Lim, K., Liang, Y., Li, Q., Barnes, T., Ahn, S.-J., Stone, K. H., McIntire, M., Hong, J., Song, J. H., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-02041-x · Cited by 695
He, W., Guo, W., Wu, H., Lin, L., Liu, Q., Han, X., Xie, Q., Liu, P., Zheng, H., Wang, L., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005937 · Cited by 626
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Injection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
Metadata
- Authors
- Chen, H., & Islam, M. S.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-15
- Volume
- 28
- Issue
- 18
- Pages
- 6656-6663
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2519625654
- Cited by
- 294
- References
- 34
- FWCI
- 11.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.