The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Interface Stability of Argyrodite Li6PS5Cl toward LiCoO2, LiNi1/3Co1/3Mn1/3O2, and LiMn2O4 in Bulk All-Solid-State Batteries
Abstract
Argyrodite Li 6 PS 5 Cl is a good candidate for being a solid electrolyte for bulk all-solid-state Li-ion batteries because of its high ionic conductivity and its good processability. However, the interface stability of sulfide-based electrolytes toward active materials (negative or positive electrodes) is known to be lower than that of oxide-based electrolytes. In this work, we investigate the interface stability of argyrodite toward several positive electrode materials: LiCoO 2, LiNi 1/3 Co 1/3 Mn 1/3 O 2, and LiMn 2 O 4 . All-solid-state half-cells were cycled, and the interface mechanisms were characterized by Auger electron spectroscopy and X-ray photoelectron spectroscopy. We show that Li 6 PS 5 Cl is oxidized into elemental sulfur, lithium polysulfides, P 2 S x ( x ≥ 5), phosphates, and LiCl at the interface with the positive electrode active materials. In spite of this interface reactivity, good capacity retention was observed over 300 cycles. Li 6 PS 5 Cl shows some reversible electrochemical activity (redox processes) that might contribute to the reversible capacity of the battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
A Battery Made from a Single Material
Han, F., Gao, T., Zhu, Y., Gaskell, K. J., & Wang, C. (2015) · Advanced Materials · doi:10.1002/adma.201500180 · Cited by 367
Dedryvère, R., Foix, D., Franger, S., Patoux, S., Daniel, L., & Gonbeau, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1026509 · Cited by 301
Self-citationVisbal, H., Aihara, Y., Ito, S., Watanabe, T., Park, Y., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.088 · Cited by 127
Lithium ions on the fast track
Masquelier, C. (2011) · Nature Materials · doi:10.1038/nmat3105 · Cited by 102
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Metadata
- Authors
- Auvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-17
- Volume
- 29
- Issue
- 9
- Pages
- 3883-3890
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2604591970
- Cited by
- 644
- References
- 10
- FWCI
- 17.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.