The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Interface Stability of Argyrodite Li6PS5Cl toward LiCoO2, LiNi1/3Co1/3Mn1/3O2, and LiMn2O4 in Bulk All-Solid-State Batteries
Abstract
Argyrodite Li 6 PS 5 Cl is a good candidate for being a solid electrolyte for bulk all-solid-state Li-ion batteries because of its high ionic conductivity and its good processability. However, the interface stability of sulfide-based electrolytes toward active materials (negative or positive electrodes) is known to be lower than that of oxide-based electrolytes. In this work, we investigate the interface stability of argyrodite toward several positive electrode materials: LiCoO 2, LiNi 1/3 Co 1/3 Mn 1/3 O 2, and LiMn 2 O 4 . All-solid-state half-cells were cycled, and the interface mechanisms were characterized by Auger electron spectroscopy and X-ray photoelectron spectroscopy. We show that Li 6 PS 5 Cl is oxidized into elemental sulfur, lithium polysulfides, P 2 S x ( x ≥ 5), phosphates, and LiCl at the interface with the positive electrode active materials. In spite of this interface reactivity, good capacity retention was observed over 300 cycles. Li 6 PS 5 Cl shows some reversible electrochemical activity (redox processes) that might contribute to the reversible capacity of the battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
A Battery Made from a Single Material
Han, F., Gao, T., Zhu, Y., Gaskell, K. J., & Wang, C. (2015) · Advanced Materials · doi:10.1002/adma.201500180 · Cited by 367
Dedryvère, R., Foix, D., Franger, S., Patoux, S., Daniel, L., & Gonbeau, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1026509 · Cited by 301
Self-citationVisbal, H., Aihara, Y., Ito, S., Watanabe, T., Park, Y., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.088 · Cited by 127
Lithium ions on the fast track
Masquelier, C. (2011) · Nature Materials · doi:10.1038/nmat3105 · Cited by 102
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Li, M., Wang, C., Chen, Z., Xu, K., & Lu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00531 · Cited by 944
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Elucidating Reversible Electrochemical Redox of Li6PS5Cl Solid Electrolyte
Tan, D. H. S., Wu, E. A., Nguyen, H., Chen, Z., Marple, M. A. T., Doux, J.-M., Wang, X., Yang, H., Banerjee, A., & Meng, Y. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01693 · Cited by 719
Zhang, Q., Cao, D., Ma, Y., Natan, A., Aurora, P., & Zhu, H. (2019) · Advanced Materials · doi:10.1002/adma.201901131 · Cited by 709
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
Tan, D. H. S., Banerjee, A., Chen, Z., & Meng, Y. S. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0657-x · Cited by 641
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Schwietert, T. K., Arszelewska, V. A., Wang, C., Yu, C., Vasileiadis, A., de Klerk, N. J. J., Hageman, J., Hupfer, T., Kerkamm, I., Xu, Y., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0576-0 · Cited by 541
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Solid-State Electrolytes for Lithium-Ion Batteries: Fundamentals, Challenges and Perspectives
Zhao, W., Yi, J., He, P., & Zhou, H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00048-0 · Cited by 464
Walther, F., Koerver, R., Fuchs, T., Ohno, S., Sann, J., Rohnke, M., Zeier, W. G., & Janek, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00770 · Cited by 433
Yu, C., Ganapathy, S., Eck, E. R. H. V., Wang, H., Basak, S., Li, Z., & Wagemaker, M. (2017) · Nature Communications · doi:10.1038/s41467-017-01187-y · Cited by 431
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Fast Charging Lithium Batteries: Recent Progress and Future Prospects
Zhu, G., Zhao, C., Huang, J., He, C., Zhang, J., Chen, S., Xu, L., Yuan, H., & Zhang, Q. (2019) · Small · doi:10.1002/smll.201805389 · Cited by 395
All-Solid-State Lithium Batteries with Sulfide Electrolytes and Oxide Cathodes
Wu, J., Shen, L., Zhang, Z., Liu, G., Wang, Z., Zhou, D., Wan, H., Xu, X., & Yao, X. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00081-4 · Cited by 373
Innovative Approaches to Li-Argyrodite Solid Electrolytes for All-Solid-State Lithium Batteries
Zhou, L., Minafra, N., Zeier, W. G., & Nazar, L. F. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00874 · Cited by 358
Riegger, L. M., Schlem, R., Sann, J., Zeier, W. G., & Janek, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202015238 · Cited by 344
Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Han, Y., Jung, S. H., Kwak, H., Jun, S., Kwak, H. H., Lee, J. H., Hong, S., & Jung, Y. S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100126 · Cited by 312
Hippauf, F., Schumm, B., Doerfler, S., Althues, H., Fujiki, S., Shiratsuchi, T., Tsujimura, T., Aihara, Y., & Kaskel, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.05.033 · Cited by 309
Du, M., Liao, K., Lu, Q., & Shao, Z. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00515c · Cited by 306
Designing Cathodes and Cathode Active Materials for Solid‐State Batteries
Minnmann, P., Strauss, F., Bielefeld, A., Ruess, R., Adelhelm, P., Burkhardt, S., Dreyer, S. L., Trevisanello, E., Ehrenberg, H., Brezesinski, T., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201425 · Cited by 277
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Ruess, R., Schweidler, S., Hemmelmann, H., Conforto, G., Bielefeld, A., Weber, D. A., Sann, J., Elm, M. T., & Janek, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9a2c · Cited by 271
Kim, A.-Y., Strauss, F., Bartsch, T., Teo, J. H., Hatsukade, T., Mazilkin, A., Janek, J., Hartmann, P., & Brezesinski, T. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02947 · Cited by 266
Li, X., Ren, Z., Norouzi Banis, M., Deng, S., Zhao, Y., Sun, Q., Wang, C., Yang, X., Li, W., Liang, J., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01676 · Cited by 263
High-Throughput Screening of Solid-State Li-Ion Conductors Using Lattice-Dynamics Descriptors
Muy, S., Voss, J., Schlem, R., Koerver, R., Sedlmaier, S. J., Maglia, F., Lamp, P., Zeier, W. G., & Shao-Horn, Y. (2019) · iScience · doi:10.1016/j.isci.2019.05.036 · Cited by 262
Chemo-Mechanical Challenges in Solid-State Batteries
Lewis, J. A., Tippens, J., Cortes, F. J. Q., & McDowell, M. T. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.06.013 · Cited by 257
Zhang, J., Zheng, C., Li, L., Xia, Y., Huang, H., Gan, Y., Liang, C., He, X., Tao, X., & Zhang, W. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903311 · Cited by 257
Metadata
- Authors
- Auvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-17
- Volume
- 29
- Issue
- 9
- Pages
- 3883-3890
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2604591970
- Cited by
- 644
- References
- 10
- FWCI
- 17.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.