The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Reaction Heterogeneity in LiNi0.8Co0.15Al0.05O2 Induced by Surface Layer
Abstract
Through operando synchrotron powder X-ray diffraction (XRD) analysis of layered transition metal oxide electrodes of composition LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA), we decouple the intrinsic bulk reaction mechanism from surface-induced effects. For identically prepared and cycled electrodes stored in different environments, we demonstrate that the intrinsic bulk reaction for pristine NCA follows solid-solution mechanism, not a two-phase as suggested previously. By combining high resolution powder X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and surface sensitive X-ray photoelectron spectroscopy (XPS), we demonstrate that adventitious Li 2 CO 3 forms on the electrode particle surface during exposure to air through reaction with atmospheric CO 2 . This surface impedes ionic and electronic transport to the underlying electrode, with progressive erosion of this layer during cycling giving rise to different reaction states in particles with an intact versus an eroded Li 2 CO 3 surface-coating. This reaction heterogeneity, with a bimodal distribution of reaction states, has previously been interpreted as a “two-phase” reaction mechanism for NCA, as an activation step that only occurs during the first cycle. Similar surface layers may impact the reaction mechanism observed in other electrode materials using bulk probes such as operando powder XRD.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Cited by
Achieving high energy density and high power density with pseudocapacitive materials
Choi, C., Ashby, D. S., Butts, D. M., DeBlock, R. H., Wei, Q., Lau, J., & Dunn, B. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0142-z · Cited by 1,964
Yang, H., Wu, H., Ge, M., Li, L., Yuan, Y., Yao, Q., Chen, J., Xia, L., Zheng, J., Chen, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808825 · Cited by 630
Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries
Xu, C., Reeves, P. J., Jacquet, Q., & Grey, C. P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003404 · Cited by 429
Märker, K., Reeves, P. J., Xu, C., Griffith, K. J., & Grey, C. P. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00140 · Cited by 417
Zhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 334
Metadata
- Authors
- Grenier, A., Liu, H., Wiaderek, K. M., Lebens-Higgins, Z. W., Borkiewicz, O. J., Piper, L. F. J., Chupas, P. J., & Chapman, K. W.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-24
- Volume
- 29
- Issue
- 17
- Pages
- 7345-7352
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2748032661
- Cited by
- 190
- References
- 1
- FWCI
- 10.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reaction Heterogeneity in LiNi0.8Co0.15Al0.05O2 Induced by Surface Layer. https://app.cochat.ai/papers/10.1021/acs.chemmater.7b02236
- The paper
- Grenier, A., Liu, H., Wiaderek, K. M., Lebens-Higgins, Z. W., Borkiewicz, O. J., Piper, L. F. J., Chupas, P. J., & Chapman, K. W. (2017). Reaction Heterogeneity in LiNi0.8Co0.15Al0.05O2 Induced by Surface Layer. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.7b02236
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.