The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Computational Discovery of Li-M-O Ion Exchange Materials for Lithium Extraction from Brines
Abstract
Lithium is an essential element for today’s high-performance batteries. Brine resources contain most of the world’s lithium reserves, but conventional processes for extracting lithium from brines are limited by low lithium recovery and large evaporation ponds. Lithium ion exchange is an alternative extraction method with potential to access lower-quality resources and decrease costs. Ion exchange materials absorb lithium from brine resources and then release the lithium in acid while absorbing hydrogen. New ion exchange materials are sought to facilitate this transformative approach. We use high-throughput density functional theory and specific ion interaction theory to predict promising new lithium metal oxide compounds suitable for lithium extraction. Starting from the Open Quantum Materials Database (OQMD) of ∼400,000 compounds, we consider 77 candidate lithium metal oxide compounds that are stable or nearly stable in their lithiated states. We interrogate this list for compounds that thermodynamically release lithium while binding hydrogen in acid and that also release hydrogen while binding lithium in brine. We further screen for selective binding of lithium relative to sodium in brine. We find that most candidate compounds either bind lithium in both acid and brine solutions or bind hydrogen in both acid and brine solutions. Such compounds are not suitable for lithium ion exchange. However, we identify nine compounds that are most promising for lithium extraction from brines: LiAlO 2, LiCuO 2, Li 2 MnO 3, Li 4 Mn 5 O 12, Li 2 SnO 3, Li 4 TiO 4, Li 4 Ti 5 O 12, Li 7 Ti 11 O 24, and Li 3 VO 4 . Four additional compounds are promising when the pH of the brine is adjusted to 10 to help drive hydrogen release: Li 2 TiO 3, LiTiO 2, Li 2 FeO 3, and Li 2 Si 3 O 7 . Four of the previously mentioned compounds are also promising for Li extraction from seawater: Li 2 MnO 3, Li 4 Mn 5 O 12, Li 7 Ti 11 O 24, and Li 3 VO 4 .
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These materials are chemically and structurally stable, even in highly concentrated brines, and avoid interference from cations such as Mg 2+ and Ca 2+ [75].”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [75]
In the citing paper
“Consequently, Li4Ti5O12 is predicted to be one of the most promising LIS precursors for large-scale Li + extraction from brine and seawater (Snydacker et al., 2018).”
From A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions (2022) · cites this paper as Snydacker et al., 2018
In the citing paper
“Furthermore, a preliminary study of Li4Ti5O12 for Li + recovery from Salar de Atacama brine and seawater revealed that Li4Ti5O12 has high Li + selectivity for aqueous solutions with high concentrations of H and Na + .”
From A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions (2022) · cites this paper as Snydacker et al., 2018
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study
Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J., & Sutton, A. P. (1998) · Physical Review B · doi:10.1103/physrevb.57.1505 · Cited by 15,173
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
CRC Handbook of Chemistry and Physics
P, D. (1992) · Journal of Molecular Structure · doi:10.1016/0022-2860(92)85083-s · Cited by 9,329
Band theory and Mott insulators: Hubbard U instead of Stoner I
Anisimov, V. I., Zaanen, J., & Andersen, O. K. (1991) · Physical Review B · doi:10.1103/physrevb.44.943 · Cited by 7,505
Density-functional theory and strong interactions: Orbital ordering in Mott-Hubbard insulators
Liechtenstein, A. I., Anisimov, V. I., & Zaanen, J. (1995) · Physical Review B · doi:10.1103/physrevb.52.r5467 · Cited by 4,803
Saal, J. E., Kirklin, S., Aykol, M., Meredig, B., & Wolverton, C. (2013) · JOM · doi:10.1007/s11837-013-0755-4 · Cited by 2,584
Self-citationThe Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies
Kirklin, S., Saal, J. E., Meredig, B., Thompson, A., Doak, J. W., Aykol, M., Rühl, S., & Wolverton, C. (2015) · npj Computational Materials · doi:10.1038/npjcompumats.2015.10 · Cited by 2,378
Self-citationDensity-functional theory and NiO photoemission spectra
Anisimov, V. I., Solovyev, I. V., Korotin, M. A., Czyżyk, M. T., & Sawatzky, G. A. (1993) · Physical Review B · doi:10.1103/physrevb.48.16929 · Cited by 2,279
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Formation enthalpies by mixing GGA and GGA+Ucalculations
Jain, A., Hautier, G., Ong, S. P., Moore, C. J., Fischer, C. C., Persson, K. A., & Ceder, G. (2011) · Physical Review B · doi:10.1103/physrevb.84.045115 · Cited by 1,321
Global lithium resources: relative importance of pegmatite, brine and other deposits
Kesler, S. E., Gruber, P. W., Medina, P. A., Keoleian, G. A., Everson, M. P., & Wallington, T. J. (2012) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2012.05.006 · Cited by 1,140
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Li−Fe−P−O2 Phase Diagram from First Principles Calculations
Ong, S. P., Wang, L., Kang, B., & Ceder, G. (2008) · Chemistry of Materials · doi:10.1021/cm702327g · Cited by 814
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Safe and fast-charging Li-ion battery with long shelf life for power applications
Zaghib, K., Dontigny, M., Guerfi, A., Charest, P., Rodrigues, I., Mauger, A., & Julien, C. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.093 · Cited by 363
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Ion-exchange — Theory and Practice
Dyer, A. (1995) · Analytica Chimica Acta · doi:10.1016/0003-2670(95)90393-3 · Cited by 327
Guggenheim, E. A., & Turgeon, J. C. (1955) · Transactions of the Faraday Society · doi:10.1039/tf9555100747 · Cited by 309
STUDIES ON SOLUBILITY. IV. THE PRINCIPLE OF THE SPECIFIC INTERACTION OF IONS
Brönsted, J. N. (1922) · Journal of the American Chemical Society · doi:10.1021/ja01426a001 · Cited by 292
Concentrated Solutions of Strong Electrolytes.
Scatchard, G. (1936) · Chemical Reviews · doi:10.1021/cr60064a008 · Cited by 289
Chitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2000) · Chemistry of Materials · doi:10.1021/cm0000191 · Cited by 253
Adsorption and desorption properties of Li+ on PVC-H1.6Mn1.6O4 lithium ion-sieve membrane
Zhu, G., Wang, P., Qi, P., & Gao, C. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.09.068 · Cited by 240
Preparation and Adsorptive Properties of Membrane-Type Adsorbents for Lithium Recovery from Seawater
Umeno, A., Miyai, Y., Takagi, N., Chitrakar, R., Sakane, K., & Ooi, K. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010847j · Cited by 173
Adsorption and Desorption Behavior of Lithium Ion in Spherical PVC–MnO2 Ion Sieve
Xiao, G., Tong, K., Zhou, L., Xiao, J., Sun, S., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300087s · Cited by 164
Mechanism of lithium(1+) insertion in spinel-type manganese oxide. Redox and ion-exchange reactions
Ooi, K., Miyai, Y., & Sakakihara, J. (1991) · Langmuir · doi:10.1021/la00054a025 · Cited by 128
Approaching chemical accuracy with density functional calculations: Diatomic energy corrections
Grindy, S. C., Meredig, B., Kirklin, S. J., Saal, J. E., & Wolverton, C. M. (2013) · Physical Review B · doi:10.1103/physrevb.87.075150 · Cited by 94
Self-citationSIT Parameters for 1:1 Electrolytes and Correlation with Pitzer Coefficients
Bretti, C., Foti, C., Porcino, N., & Sammartano, S. (2006) · Journal of Solution Chemistry · doi:10.1007/s10953-006-9068-3 · Cited by 67
Selective Uptake of Lithium Ion from Brine by H1.33Mn1.67O4 and H1.6Mn1.6O4
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2012) · Chemistry Letters · doi:10.1246/cl.2012.1647 · Cited by 60
Crystalline insoluble acid salts of tetravalent metals—IX
Alberti, G., & Massucci, M. A. (1970) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(70)80662-5 · Cited by 42
Sipos, P. M. (2008) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2008.04.003 · Cited by 42
Preparation Method and Lithium Adsorption Property of λ-MnO2-Silica Composite
Onodera, Y., Iwasaki, T., Hayashi, H., & Torii, K. (1990) · Chemistry Letters · doi:10.1246/cl.1990.1801 · Cited by 20
Research works printed but not linked: 1
- Grenthe I., 1997, Modeling in Aquatic Chemistry, 325
Cited by
Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review
Zhu, R., Wang, S., Srinivasakannan, C., Li, S., Yin, S., Zhang, L., Jiang, X., Zhou, G., & Zhang, N. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01571-9 · Cited by 318
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions
Murphy, O., & Haji, M. N. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.1008680 · Cited by 157
“Consequently, Li4Ti5O12 is predicted to be one of the most promising LIS precursors for large-scale Li extraction from brine and seawater (Snydacker et al., 2018).”
BackgroundChen, S., Chen, Z., Wei, Z., Hu, J., Guo, Y., & Deng, T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128320 · Cited by 149
How to make lithium extraction cleaner, faster and cheaper — in six steps
Haddad, A. Z., Hackl, L., Aküzüm, B., Pohlman, G., Magnan, J.-F., & Kostecki, R. M. (2023) · Nature · doi:10.1038/d41586-023-00978-2 · Cited by 160
Metadata
- Authors
- Snydacker, D. H., Hegde, V. I., Aykol, M., & Wolverton, C.
- Affiliations
- Northwestern University (US)
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-25
- Volume
- 30
- Issue
- 20
- Pages
- 6961-6968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2893649550
- Cited by
- 39
- References
- 38
- Citations by year
- 2026: 5 · 2025: 5 · 2024: 7 · 2023: 6 · 2022: 3 · 2021: 8 · 2020: 4 · 2019: 1
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Funders
- Basic Energy Sciences (DE-AC02-06CH11357)
- Dow Chemical Company
- Division of Materials Research (1309957)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Keywords
- lithium recovery, lithium ion exchange, lithium brines, lithium metal oxides, hydrogen release, Li2MnO3, Li4Mn5O12, Li3VO4, Li2TiO3, lithium titanate, Li2SnO3, LiAlO2, computational materials discovery, high-throughput screening
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.