The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Importance of Critical Molecular Weight of Semicrystalline n-Type Polymers for Mechanically Robust, Efficient Electroactive Thin Films
Abstract
Mechanical properties of conducting polymers are an essential consideration in the design of flexible and stretchable electronics, but the guidelines for the material design having both high mechanical and electrical properties remain limited. Here we provide an important guideline for the design of mechanically robust, electroactive polymer thin films in terms of the molecular weight of the polymers. These studies based on a highly efficient, representative n-type conjugated polymer (P(NDI2OD-T2)) revealed a marked enhancement in mechanical properties across a narrow molecular weight range, highlighting the existence of a critical molecular weight that can be exploited to engineer films that balance processability and mechanical and electronic properties. We found the thin films formed from high molecular weight polymers (i.e., number-average molecular weight ( M n ) ∼ 163 kg mol –1 ) to exhibit superior mechanical compliance and robustness, with a 114-fold enhanced strain at fracture and a 2820-fold enhanced toughness, as compared to those of low molecular weight polymer films ( M n = 15 kg mol –1 ). In particular, we observed a jump in the mechanical properties between the M n = 48 and 103 kg mol - 1, yielding a 26-fold enhanced strain at fracture and a 160-fold enhanced toughness. The significant improvement of tensile properties indicates the presence of a critical molecular weight at which entangled polymer networks start to form, as supported by the analysis of the thermal and crystalline properties, specific viscosity, and microstructure. Our work provides useful guidelines for the design of conjugated polymers with recommendations for the best combinations of mechanical robustness and electrical performance for flexible and stretchable electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Self-citationCoffin, R. C., Peet, J., Rogers, J., & Bazan, G. C. (2009) · Nature Chemistry · doi:10.1038/nchem.403 · Cited by 597
Cited by
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Self-citationPolymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Molecular Design of Stretchable Polymer Semiconductors: Current Progress and Future Directions
Zheng, Y., Zhang, S., Tok, J. B.-H., & Bao, Z. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c00072 · Cited by 350
Ma, W., Wang, L., Zhang, Q., Dong, X., Zhu, T., & Lu, S. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213031 · Cited by 17
Metadata
- Authors
- Choi, J., Kim, W., Kim, D., Kim, S., Chae, J., Choi, S. Q., Kim, F. S., Kim, T.-S., & Kim, B. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-23
- Volume
- 31
- Issue
- 9
- Pages
- 3163-3173
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2941405811
- Cited by
- 158
- References
- 2
- FWCI
- 6.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Importance of Critical Molecular Weight of Semicrystalline n-Type Polymers for Mechanically Robust, Efficient Electroactive Thin Films. https://app.cochat.ai/papers/10.1021/acs.chemmater.8b05114
- The paper
- Choi, J., Kim, W., Kim, D., Kim, S., Chae, J., Choi, S. Q., Kim, F. S., Kim, T.-S., & Kim, B. J. (2019). Importance of Critical Molecular Weight of Semicrystalline n-Type Polymers for Mechanically Robust, Efficient Electroactive Thin Films. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.8b05114
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.