The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Observation of Chemomechanical Failure and the Influence of Cutoff Potentials in All-Solid-State Li–S Batteries
Open accessAbstract
Because of a remarkably high theoretical energy density, the lithium–sulfur (Li–S) battery has attracted significant attention as a candidate for next-generation batteries. While employing solid electrolytes can provide a new avenue for high-capacity Li–S cells, all-solid-state batteries have unique failure mechanisms such as chemomechanical failure due to the volume changes of active materials. In this study, we investigate all-solid-state Li–S model cells with differently processed cathode composites and elucidate a typical failure mechanism stemming from irreversible Li 2 S formation in the cathode composites. Reducing the particle size is key to minimizing the influence of volume changes, and a capacity of >1000 mAh g sulfur –1 is achieved by ball milling of the cathode composites. In addition, the long-term stability of the ball-milled cathode is investigated by varying the upper and lower cutoff potentials for cycling, which results in the unveiling of the significantly detrimental role of the lower cutoff potential. Preventing a deep discharge leads to a reversible capacity of 800 mAh g sulfur –1 over 50 cycles in the optimized cell. This work highlights the importance of mitigating chemomechanical failure using microstructural engineering as well as the influence of the cutoff potentials in all-solid-state Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationLithium-Sulfur Battery Technology Readiness and Applications—A Review
Fotouhi, A., Auger, D., O’Neill, L., Cleaver, T., & Walus, S. (2017) · Energies · doi:10.3390/en10121937 · Cited by 180
Cited by
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Walther, F., Koerver, R., Fuchs, T., Ohno, S., Sann, J., Rohnke, M., Zeier, W. G., & Janek, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00770 · Cited by 433
Self-citationInnovative Approaches to Li-Argyrodite Solid Electrolytes for All-Solid-State Lithium Batteries
Zhou, L., Minafra, N., Zeier, W. G., & Nazar, L. F. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00874 · Cited by 358
Self-citationNikodimos, Y., Huang, C.-J., Taklu, B. W., Su, W.-N., & Hwang, B. J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03032a · Cited by 345
Metadata
- Authors
- Ohno, S., Koerver, R., Dewald, G., Rosenbach, C., Titscher, P., Steckermeier, D., Kwade, A., Janek, J., & Zeier, W. G.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-01
- Volume
- 31
- Issue
- 8
- Pages
- 2930-2940
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2926123667
- Cited by
- 183
- References
- 2
- FWCI
- 7.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Observation of Chemomechanical Failure and the Influence of Cutoff Potentials in All-Solid-State Li–S Batteries. https://app.cochat.ai/papers/10.1021/acs.chemmater.9b00282
- The paper
- Ohno, S., Koerver, R., Dewald, G., Rosenbach, C., Titscher, P., Steckermeier, D., Kwade, A., Janek, J., & Zeier, W. G. (2019). Observation of Chemomechanical Failure and the Influence of Cutoff Potentials in All-Solid-State Li–S Batteries. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.9b00282
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.