The DOI matches its Crossref record; 252 of the 252 references it cites were found in a registry or an index.
Emerging Engineered Wood for Building Applications
Abstract
emissions, the largest share among different sectors. Lowering the carbon footprint of buildings requires the development of carbon-storage materials as well as novel designs that could enable multifunctional components to achieve widespread applications. Wood is one of the most abundant biomaterials on Earth and has been used for construction historically. Recent research breakthroughs on advanced engineered wood products epitomize this material's tremendous yet largely untapped potential for addressing global sustainability challenges. In this review, we explore recent developments in chemically modified wood that will produce a new generation of engineered wood products for building applications. Traditionally, engineered wood products have primarily had a structural purpose, but this review broadens the classification to encompass more aspects of building performance. We begin by providing multiscale design principles of wood products from a computational point of view, followed by discussion of the chemical modifications and structural engineering methods used to modify wood in terms of its mechanical, thermal, optical, and energy-related performance. Additionally, we explore life cycle assessment and techno-economic analysis tools for guiding future research toward environmentally friendly and economically feasible directions for engineered wood products. Finally, this review highlights the current challenges and perspectives on future directions in this research field. By leveraging these new wood-based technologies and analysis tools for the fabrication of carbon-storage materials, it is possible to design sustainable and carbon-negative buildings, which could have a significant impact on mitigating climate change.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–252 of 252
Hu, M., & Esram, N. W. (2021) · Sustainability · doi:10.3390/su132312961 · Cited by 55
Self-citationStiff as a Board: Perspectives on the Crystalline Modulus of Cellulose
Eichhorn, S. J. (2012) · ACS Macro Letters · doi:10.1021/mz300420k · Cited by 54
Shishehbor, M., & Zavattieri, P. D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.002 · Cited by 53
Life Cycle Assessment of Oriented Strand Boards (OSB): from Process Innovation to Ecodesign
Benetto, E., Becker, M., & Welfring, J. (2009) · Environmental Science & Technology · doi:10.1021/es900707u · Cited by 52
Lan, K., Xu, Y., Kim, H., Ham, C.-H., Kelley, S. S., & Park, S. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125726 · Cited by 51
Self-citationFlexible Transparent Sliced Veneer for Alternating Current Electroluminescent Devices
Zhang, T., Yang, P., Li, Y., Cao, Y., Zhou, Y., Chen, M., Zhu, Z., Chen, W., & Zhou, X. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01129 · Cited by 50
Höglund, M., Garemark, J., Nero, M., Willhammar, T., Popov, S., & Berglund, L. A. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c00806 · Cited by 49
Lan, K., & Yao, Y. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c05923 · Cited by 47
Self-citationJankauskaitė, V., Balčiūnaitienė, A., Alexandrova, R., Buškuvienė, N., & Žukienė, K. (2020) · Coatings · doi:10.3390/coatings10060567 · Cited by 46
Lan, K., Ou, L., Park, S., Kelley, S. S., & Yao, Y. (2019) · Energy Technology · doi:10.1002/ente.201900850 · Cited by 45
Self-citationLan, K., Zhang, B., & Yao, Y. (2022) · One Earth · doi:10.1016/j.oneear.2022.07.001 · Cited by 44
Self-citationNordby, A. S., & Shea, A. (2013) · Journal of Industrial Ecology · doi:10.1111/jiec.12046 · Cited by 43
Ramezani, M. G., & Golchinfar, B. (2019) · Journal of Composites Science · doi:10.3390/jcs3020057 · Cited by 43
Understanding Wood Surface Chemistry and Approaches to Modification: A Review
Rowell, R. M. (2021) · Polymers · doi:10.3390/polym13152558 · Cited by 43
Cheng, J., Jia, Z., & Li, T. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.103893 · Cited by 42
Self-citationLi, N., Bian, H., Zhu, J. Y., Ciesielski, P. N., & Pan, X. (2021) · Green Chemistry · doi:10.1039/d1gc00145k · Cited by 41
Self-citationFabrication and characterization of reversible thermochromic wood veneers
Zhu, X., Liu, Y., Dong, N., & Li, Z. (2017) · Scientific Reports · doi:10.1038/s41598-017-17238-9 · Cited by 39
Techno-economic analysis for manufacturing cross-laminated timber
Brandt, K., Wilson, A., Bender, D., Dolan, J. D., & Wolcott, M. P. (2019) · BioResources · doi:10.15376/biores.14.4.7790-7804 · Cited by 38
Fracture behaviour of historic and new oak wood
Luimes, R. A., Suiker, A. S. J., Verhoosel, C. V., Jorissen, A. J. M., & Schellen, H. L. (2018) · Wood Science and Technology · doi:10.1007/s00226-018-1038-6 · Cited by 38
Coarse-grained modeling of nanocellulose network towards understanding the mechanical performance
Li, Z., & Xia, W. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100942 · Cited by 38
Life cycle analysis of cross-insulated timber panels
Santos, P., Correia, J. R., GODINHO, L. M. C., Dias, A. M. P. G., & Dias, A. M. A. (2020) · Structures · doi:10.1016/j.istruc.2020.12.008 · Cited by 38
Pommier, R., Grimaud, G., Prinçaud, M., Perry, N., & Sonnemann, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.130 · Cited by 36
Cationization of cellulose fabrics by polyallylamine binding
Wu, M., & Kuga, S. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22895 · Cited by 35
Effect of UV Radiation on Optical Properties and Hardness of Transparent Wood
Wachter, I., Štefko, T., Rantuch, P., Martinka, J., & Pastierová, A. (2021) · Polymers · doi:10.3390/polym13132067 · Cited by 35
Lan, K., Park, S., Kelley, S. S., English, B. C., Yu, T.-H. “., Larson, J. A., & Yao, Y. (2020) · GCB Bioenergy · doi:10.1111/gcbb.12752 · Cited by 33
Self-citationEnhancing water resistance of welded dowel wood joints by acetylated lignin
Pizzi, A., Zhou, X., Navarrete, P., Segovia, C., Mansouri, H. R., Pena, M. I. P., & Pichelin, F. (2012) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2012.705512 · Cited by 32
Daystar, J., Venditti, R., & Kelley, S. S. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1184-8 · Cited by 31
Rosenbaum, R. K., Bachmann, T. M., Gold, L. S., Huijbregts, M. A. J., Jolliet, O., Juraske, R., Koehler, A., Larsen, H. F., MacLeod, M., Margni, M., et al. (2008) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-008-0038-4 · Cited by 31
Bowers, T., Puettmann, M., Ganguly, I., & Eastin, I. (2017) · Forest Products Journal · doi:10.13073/fpj-d-17-00008 · Cited by 31
Ren, K., Xia, Q., Liu, Y., Cheng, W., Zhu, Y., Liu, Y., & Yu, H. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108698 · Cited by 28
Tanguay, X., Essoua, G. G. E., & Amor, B. (2021) · Journal of Industrial Ecology · doi:10.1111/jiec.13167 · Cited by 28
Fire Safety of Mass timber Buildings with CLT in USA
Barber, D. (2018) · Wood and Fiber Science · doi:10.22382/wfs-2018-042 · Cited by 26
Mechanics of cellulose nanopaper using a scalable coarse-grained modeling scheme
Ray, U., Pang, Z., & Li, T. (2021) · Cellulose · doi:10.1007/s10570-021-03740-x · Cited by 26
Self-citationŠturcová, A., Eichhorn, S. J., & Jarvis, M. C. (2006) · Biomacromolecules · doi:10.1021/bm060457m · Cited by 23
Thermal insulation performances of carbonized sawdust packed bed for energy saving in buildings
Li, D., & Huang, C. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111625 · Cited by 23
Zou, W., Wang, Z., Sun, D., Ji, X., Zhang, P., & Zhu, Z. (2020) · Scientific Reports · doi:10.1038/s41598-020-58941-4 · Cited by 22
Process Simulation-Based Life Cycle Assessment of Dissolving Pulps
Echeverria, D., Venditti, R. A., Jameel, H., et al. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.1c06523 · Cited by 22
Lu, H. R., Hanandeh, A. E., Gilbert, B. P., & Baillères, H. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201712002013 · Cited by 21
Cradle-to-Gate Life-Cycle Assessment of a Glued-Laminated Wood Product from Quebec's Boreal Forest
Laurent, A., Gaboury, S., Wells, J., Bonfils, S., Boucher, J., Bouchard, S., D’Amours, S., & Villeneuve, C. (2013) · Forest Products Journal · doi:10.13073/fpj-d-13-00048 · Cited by 18
Cradle-to-Gate Life-Cycle Assessment of Laminated Veneer Lumber Production in the United States*
Bergman, R. D., & Alanya‐Rosenbaum, S. (2016) · Forest Products Journal · doi:10.13073/fpj-d-16-00046 · Cited by 18
Yao, Y., & Huang, R. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.01.037 · Cited by 18
Self-citationLife Cycle Assessment of Reprocessed Cross Laminated Timber in Latvia
Vamža, I., Diaz, F., Resnais, P., Radziņa, A., & Blumberga, D. (2021) · Environmental and Climate Technologies · doi:10.2478/rtuect-2021-0005 · Cited by 18
Impacts of the Allocation Assumption in Life-Cycle Assessments of Wood-Based Panels*
Taylor, A. M., Bergman, R. D., Puettmann, M., & Alanya‐Rosenbaum, S. (2017) · Forest Products Journal · doi:10.13073/fpj-d-17-00009 · Cited by 16
Laurent, A., Ménard, J.-F., Lesage, P., & Beauregard, R. (2016) · BioResources · doi:10.15376/biores.11.4.8981-9001 · Cited by 15
Cradle-to-Grave Life-Cycle Assessment of Cellulosic Fiberboard
Sahoo, K., Bergman, R. D., & Khatri, P. (2021) · Recent Progress in Materials · doi:10.21926/rpm.2104049 · Cited by 15
Green Assessment Method for Industrial Technology: A Case Study of the Saline Lake Industry
Xie, X., Luo, M., & Hu, S. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c06976 · Cited by 14
Cradle-to-Gate Life-Cycle Assessment of Composite I-Joist Production in the United States*
Bergman, R. D., & Alanya‐Rosenbaum, S. (2016) · Forest Products Journal · doi:10.13073/fpj-d-16-00047 · Cited by 13
Zhang, Z., & Lan, K. (2022) · Journal of Renewable Materials · doi:10.32604/jrm.2022.017506 · Cited by 12
Self-citationLife Cycle Assessment of North American Laminated Strand Lumber (LSL) Production
Khatri, P., Sahoo, K., Bergman, R. D., & Puettmann, M. (2021) · Recent Progress in Materials · doi:10.21926/rpm.2104048 · Cited by 9
Adeeb, E., Kim, T. W., & Sohn, C. H. (2018) · Forest Products Journal · doi:10.13073/fpj-d-17-00081 · Cited by 7
Shine-through luminescent wood membranes
Ritter, M., Burgert, I., & Panzarasa, G. (2021) · Materials Advances · doi:10.1039/d1ma01045j · Cited by 6
Self-citationYildirim, N. (2018) · Ormancılık Araştırma Dergisi · doi:10.17568/ogmoad.391400 · Cited by 4
Cited by
Materials in Radiative Cooling Technologies
Liu, R., Wang, S., Zhou, Z., Zhang, K., Wang, G., Chen, C., & Long, Y. (2025) · Advanced Materials · doi:10.1002/adma.202401577 · Cited by 295
Metadata
- Authors
- Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., Pan, X., Li, T., Burgert, I., & Hu, L.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-10-19
- Volume
- 123
- Issue
- 5
- Pages
- 1843-1888
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4306842249
- Cited by
- 326
- References
- 252
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.