CoChat

Techno-economic analysis for manufacturing cross-laminated timber

Open access

The DOI matches its Crossref record; 8 of the 10 references it cites were found in a registry or an index.

Abstract

Cross-laminated timber (CLT) is a bio-based building material that enables rapid construction and buildings with low embodied energy. Despite its comparative maturity in European markets, relatively little information regarding process design and economics for the manufacture of cross-laminated timber is available in the literature. Two techno-economic analyses were conducted to quantify the mill-gate cost of cross-laminated timber. The cross-laminated timber manufacturing process was described, and costs were analyzed for two facility scales. Cross-laminated timber produced at the large-scale facility using lumber priced at an average value for the northwest United States has a minimum selling price of $536/m3. Sensitivity analyses were used to define the impact of plant size, asset utilization, lumber price, plant capital cost, material waste, and other variables on minimum selling price. The cost of cross laminated timber rises quickly when a facility is not fully utilized. The second-ranking cost controlling variable is lumber price, while energy prices have minimal influence. The price of cross laminated timber can be optimized by locating a facility near low-cost lumber. The lowest-price region analyzed was the southeast United States using Southern Pine, which reduced the cost of cross laminated timber to $518/m3.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.15376/biores.14.4.7790-7804

Cites

8 of 8 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 CLT process flow diagram
Fig. 1 CLT process flow diagramCC-BY · From the PDF
Fig. 2 Impact of yearly production volume on minimum selling price (MSP) for small and largescale facilities. The grey area shows literature values of CLT prices ($600-742/m 3 )
Fig. 2 Impact of yearly production volume on minimum selling price (MSP) for small and largescale facilities. The grey area shows literature values of CLT prices ($600-742/m 3 )CC-BY · From the PDF
Fig. 3 Changes in minimum selling price (MSP) of CLT based on changes to baseline variables, listed on y-axis in parenthesis, of manufacturing variables from base case cost of $536/m 3 . Total delivered equipment cost is abbreviated TDEC.
Fig. 3 Changes in minimum selling price (MSP) of CLT based on changes to baseline variables, listed on y-axis in parenthesis, of manufacturing variables from base case cost of $536/m 3 . Total delivered equipment cost is abbreviated TDEC.CC-BY · From the PDF
Fig. 4 Cost change for a single building based on variable changes at mill gate for large and small-scale facilities. The blue lines are at $5000 and $15000, the assumed values that will influence CLT purchase.
Fig. 4 Cost change for a single building based on variable changes at mill gate for large and small-scale facilities. The blue lines are at $5000 and $15000, the assumed values that will influence CLT purchase.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 8 references

Research works printed but not linked: 8

  1. [2]2. Anderson, R. (2016). "A cross laminated timber manufacturing plant: If you build it, will the lumber come?" in: 2016 Mass Timber Conference, Portland, OR, USA.
  2. [16]16. Espinoza, O., Buehlmann, U., Mallo, M. F. L., Trujillo, V. R. (2016). "Identification of research areas to advance the adoption of cross-laminated timber in North America," BioProducts Business 1(5), pp. 60-72.
  3. [17]17. Grasser, K. K. (2015). Development of Cross Laminated Timber in the United States of America, Master's Thesis, University of Tennessee, Knoxville, TN, USA.
  4. [20]20. Karacabeyli, E., and Douglas, B. (2013). CLT Handbook: U.S. Edition (Report No: Special Publication SP-529E), FPInnovations, Pointe-Claire, QC, Canada.
  5. [22]22. Mohammad, M., Gagnon, S., Douglas, B. K., and Podesto, L. (2012). "Introduction to cross laminated timber," Wood Design Focus 22(2), 3-12.
  6. [23]23. Muszyński, L., Hansen, E., Fernando, S., Schwarzmann, G., and Rainer, J. (2017). "Insights into the global cross-laminated timber industry," BioProducts Business 2(8), 77-92. DOI: 10.22382/bpb-2017-008 · doi:10.22382/bpb-2017-008
  7. [26]26. Peters, M. S., Timmerhaus, K. D., and West, R. E. (2003). "Analysis of cost estimation," in: Plant Design and Economics for Chemical Engineers (5 th Ed.), E. D. Glandt, M. T. Klein, and T. F. Edgar (eds.), McGraw-Hill Education, New Delhi, India, pp. 226- 278.
  8. [28]28. Reeb, J. (2011). "Compare costs of different fuels for drying lumber," in: Portland International Center for Management of Engineering and Technology 2011 International Conference, Portland, OR, USA.

Cited by

See all 43

Metadata

Authors
Brandt, K., Wilson, A., Bender, D., Dolan, J. D., & Wolcott, M. P.
Affiliations
Washington State University (US)
Corresponding author
Brandt, Kristin
Venue
BioResources
Publisher
BioResources
Published
2019-08-09
Volume
14
Issue
4
Pages
7790-7804
ISSN
1930-2126 (ISSN-L)
OpenAlex
W2966990267
Cited by
38
References
10
Citations by year
2026: 5 · 2025: 7 · 2024: 3 · 2023: 8 · 2022: 4 · 2021: 5 · 2020: 4 · 2019: 2
FWCI
2.51
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
BioResources (publishedVersion, cc-by)
Funders
  • U.S. Department of Energy
  • Washington State University
  • FPInnovations
  • U.S. Forest Service
  • National Renewable Energy Laboratory
  • Pacific Northwest National Laboratory
Topics
  • Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
  • Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Forest Biomass Utilization and Management
Keywords
cross-laminated timber, techno-economic analysis, minimum selling price, asset utilization, material waste, southern pine, bio-based building materials, facility location

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Techno-economic analysis for manufacturing cross-laminated timber. https://app.cochat.ai/papers/10.15376/biores.14.4.7790-7804
The paper
Brandt, K., Wilson, A., Bender, D., Dolan, J. D., & Wolcott, M. P. (2019). Techno-economic analysis for manufacturing cross-laminated timber. BioResources. https://doi.org/10.15376/biores.14.4.7790-7804

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.