The DOI matches its Crossref record; 304 of the 304 references it cites were found in a registry or an index.
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Open accessAbstract
Since the advent of additive manufacturing, known commonly as 3D printing, this technology has revolutionized the biofabrication landscape and driven numerous pivotal advancements in tissue engineering and regenerative medicine. Many 3D printing methods were developed in short course after Charles Hull first introduced the power of stereolithography to the world. However, materials development was not met with the same enthusiasm and remained the bottleneck in the field for some time. Only in the past decade has there been deliberate development to expand the materials toolbox for 3D printing applications to meet the true potential of 3D printing technologies. Herein, we review the development of biomaterials suited for light-based 3D printing modalities with an emphasis on bioprinting applications. We discuss the chemical mechanisms that govern photopolymerization and highlight the application of natural, synthetic, and composite biomaterials as 3D printed hydrogels. Because the quality of a 3D printed construct is highly dependent on both the material properties and processing technique, we included a final section on the theoretical and practical aspects behind light-based 3D printing as well as ways to employ that knowledge to troubleshoot and standardize the optimization of printing parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–304 of 304
Hu, T., Wu, Y., Zhao, X., Wang, L., Bi, L., Ma, P. X., & Guo, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.072 · Cited by 123
A porous photocurable elastomer for cell encapsulation and culture
Gerecht, S., Townsend, S. A., Pressler, H. M., Zhu, H., Nijst, C. L. E., Bruggeman, J. P., Nichol, J. W., & Langer, R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.039 · Cited by 121
Additive manufactured biodegradable poly(glycerol sebacate methacrylate) nerve guidance conduits
Singh, D., Harding, A. J., Albadawi, E. A., Boissonade, F. M., Haycock, J. W., & Claeyssens, F. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.055 · Cited by 120
van Berkel, K. Y., & Hawker, C. J. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23917 · Cited by 119
Paz, V. F., Emons, M., Obata, K., Ovsianikov, A., Peterhänsel, S., Frenner, K., Reinhardt, C., Chichkov, B. N., Morgner, U., & Osten, W. (2012) · Journal of Laser Applications · doi:10.2351/1.4712151 · Cited by 118
Scattering perspectives on nanostructural inhomogeneity in polymer network gels
Seiffert, S. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.011 · Cited by 115
Biomimetic poly(glycerol sebacate) (PGS) membranes for cardiac patch application
Rai, R., Tallawi, M., Barbani, N., Frati, C., Madeddu, D., Cavalli, S., Graiani, G., Quaini, F., Roether, J. A., Schubert, D. W., et al. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.04.058 · Cited by 114
Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability
Hoorick, J. V., Gruber, P., Marković, M., Rollot, M., Graulus, G., Vagenende, M., Tromayer, M., Erps, J. V., Hugo Thienpont, A., Martins, J. C., et al. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800181 · Cited by 113
Zhou, M., Lee, B. H., Tan, Y. J., & Tan, L. P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab063f · Cited by 112
Structural reinforcement of cell-laden hydrogels with microfabricated three dimensional scaffolds
Cha, C., Soman, P., Zhu, W. Z., Nikkhah, M., Camci‐Unal, G., Chen, S., & Khademhosseini, A. (2013) · Biomaterials Science · doi:10.1039/c3bm60210a · Cited by 111
Self-citationRavichandran, R., Venugopal, J. R., Sundarrajan, S., Mukherjee, S., Sridhar, R., & Ramakrishna, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/38/385102 · Cited by 111
Light-induced step-growth polymerization
Yılmaz, G., & Yağcı, Y. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101178 · Cited by 111
Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries
Warner, J., Soman, P., Zhu, W. Z., Tom, M., & Chen, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00140 · Cited by 109
Self-citationIfkovits, J. L., Devlin, J. J., Eng, G. M., Martens, T. P., Vunjak‐Novakovic, G., & Burdick, J. A. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900403k · Cited by 108
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 108
Chen, R. T., Marchesan, S., Evans, R. A., Styan, K. E., Such, G. K., Postma, A., McLean, K. M., Muir, B. W., & Caruso, F. (2012) · Biomacromolecules · doi:10.1021/bm201802w · Cited by 104
Nanoengineered thermoresponsive magnetic hydrogels for biomedical applications
Jalili, N. A., Muscarello, M., & Gaharwar, A. K. (2016) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10034 · Cited by 103
Cui, H., Esworthy, T. J., Zhou, X., Hann, S.-Y., Glazer, R. I., Li, R., & Zhang, L. G. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900924 · Cited by 103
(1938) · Journal of the Society of Chemical Industry · doi:10.1002/jctb.5000573206 · Cited by 103
3D printing of photocurable poly(glycerol sebacate) elastomers
Yeh, Y., Highley, C. B., Ouyang, L., & Burdick, J. A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045004 · Cited by 101
The crosstalk of hyaluronan-based extracellular matrix and synapses
Frischknecht, R., & Seidenbecher, C. I. (2008) · Neuron Glia Biology · doi:10.1017/s1740925x09990226 · Cited by 97
Goktas, M., Çınar, G., Orujalipoor, I., İde, S., Tekinay, A. B., & Guler, M. O. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00041 · Cited by 97
Eibel, A., Fast, D. E., & Gescheidt, G. (2018) · Polymer Chemistry · doi:10.1039/c8py01195h · Cited by 97
Hribar, K. C., Finlay, D., Ma, X., Qu, X., Ondeck, M. G., Chung, P. H., Zanella, F., Engler, A. J., Sheikh, F., Vuori, K., et al. (2015) · Lab on a Chip · doi:10.1039/c5lc00159e · Cited by 96
Self-citationWu, D., Loh, X. J., Wu, Y., Lay, C. L., & Liu, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106639c · Cited by 96
Canonical Wnt5b Signaling Directs Outlying Nkx2.5+ Mesoderm into Pacemaker Cardiomyocytes
Ren, J., Han, P., Ma, X., Farah, E. N., Bloomekatz, J. E., Zeng, X.-X. I., Zhang, R., Swim, M. M., Witty, A. D., Knight, H. G., et al. (2019) · Developmental Cell · doi:10.1016/j.devcel.2019.07.014 · Cited by 95
Self-citationSurface Modification Using Thiol−Acrylate Conjugate Addition Reactions
Khire, V. S., Lee, T. Y., & Bowman, C. N. (2007) · Macromolecules · doi:10.1021/ma070146j · Cited by 94
Jiang, L., Jiang, Y., Stiadle, J. M., Wang, X., Wang, L., Li, Q., Shen, C., Thibeault, S. L., & Turng, L. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.027 · Cited by 94
Jaafar, I. H., Ammar, M. M., Jedlicka, S. S., Pearson, R. A., & Coulter, J. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4259-0 · Cited by 93
van der Laan, H. L., Burns, M. A., & Scott, T. F. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00412 · Cited by 93
Ruskowitz, E. R., & DeForest, C. A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00177 · Cited by 92
Rai, R., Tallawi, M., Frati, C., Falco, A., Gervasi, A., Quaini, F., Roether, J. A., Hochburger, T., Schubert, D. W., Seik, L., et al. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500154 · Cited by 91
Vogt, L., Rivera, L. R., Liverani, L., Piegat, A., Fray, M. E., & Boccaccini, A. R. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.04.091 · Cited by 90
Release of Magnetic Nanoparticles from Cell-Encapsulating Biodegradable Nanobiomaterials
Xu, F., İnci, F., Mullick, O., Gurkan, U. A., Sung, Y., Kavaz, D., Li, B., Denkbaş, E. B., & Demirci, U. (2012) · ACS Nano · doi:10.1021/nn300902w · Cited by 89
Gao, J., Ensley, A. E., Nerem, R. M., & Wang, Y. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31434 · Cited by 89
Light-based 3D printing of hydrogels with high-resolution channels
Benjamin, A. D., Abbasi, R., Owens, M., Olsen, R. J., Walsh, D. J., LeFevre, T. B., & Wilking, J. N. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aad667 · Cited by 87
Desai, P. N., Yuan, Q., & Yang, H. (2010) · Biomacromolecules · doi:10.1021/bm901240g · Cited by 86
Salmoria, G. V., Ahrens, C. H., Beal, V. E., et al. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.05.016 · Cited by 85
Rapid Prototyping of Polyurethane for the Creation of Vascular Systems
Xu, W., Wang, X., Yan, Y., & Zhang, R. (2008) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507088271 · Cited by 83
Liu, J., He, J., Liu, J., Ma, X., Chen, Q., Lawrence, N., Zhu, W. Z., Xu, Y., & Chen, S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00040 · Cited by 83
Self-citationLaser microfabricated poly(glycerol sebacate) scaffolds for heart valve tissue engineering
Masoumi, N., Jean, A., Zugates, J. T., Johnson, K. L., & Engelmayr, G. C. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34305 · Cited by 82
Huang, X., Wang, X., & Zhao, Y. (2017) · Dyes and Pigments · doi:10.1016/j.dyepig.2017.02.040 · Cited by 81
In Vitro enzymatic degradation of poly (glycerol sebacate)-based materials
Liang, S., Yang, X., Fang, X., Cook, W. D., Thouas, G. A., & Chen, Q.-Z. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.080 · Cited by 79
Nerve tissue engineering using blends of poly(3‐hydroxyalkanoates) for peripheral nerve regeneration
Lizarraga‐Valderrama, L. R., Nigmatullin, R., Taylor, C. S., Haycock, J. W., Claeyssens, F., Knowles, J. C., & Roy, I. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201400151 · Cited by 78
Thiol‐Ene Step‐Growth as a Versatile Route to Functional Polymers
Sarapas, J. M., & Tew, G. N. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201609023 · Cited by 78
Advanced 4D-bioprinting technologies for brain tissue modeling and study
Esworthy, T. J., Miao, S., Lee, S., Zhou, X., Cui, H., Zuo, Y. Y., & Zhang, L. G. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1631899 · Cited by 78
Ravichandran, R., Venugopal, J. R., Sundarrajan, S., Mukherjee, S., & Ramakrishna, S. (2013) · World Journal of Cardiology · doi:10.4330/wjc.v5.i3.28 · Cited by 77
Xue, D., Zhang, J., Wang, Y., & Mei, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00696 · Cited by 77
Pashneh‐Tala, S., Owen, R., Bahmaee, H., Rekštytė, S., Malinauskas, M., & Claeyssens, F. (2018) · Frontiers in Physics · doi:10.3389/fphy.2018.00041 · Cited by 75
Yang, K. C., Zhang, J., Ma, X., Ma, Y., Kan, C., Ma, H., Li, Y., Yuan, Y., & Liu, C. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.05.083 · Cited by 73
Self-citationAmounts of Artificial Food Dyes and Added Sugars in Foods and Sweets Commonly Consumed by Children
Stevens, L. J., Burgess, J. R., Stochelski, M. A., & Kuczek, T. (2014) · Clinical Pediatrics · doi:10.1177/0009922814530803 · Cited by 73
Greene, T., & Lin, C. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00436 · Cited by 73
Mitigating Scattering Effects in Light-Based Three-Dimensional Printing Using Machine Learning
You, S., Guan, J., Alido, J., Hwang, H. H., Yu, R., Kwe, L., Su, H., & Chen, S. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4046986 · Cited by 73
Self-citationMultiphoton crosslinking for biocompatible 3D printing of type I collagen
Bell, A., Kofron, M. J., & Nistor, V. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035007 · Cited by 71
Thiol−Ene Photopolymerization Kinetics of Vinyl Acrylate/Multifunctional Thiol Mixtures
Lee, T. Y., Roper, T. M., Jonsson, E. S., et al. (2004) · Macromolecules · doi:10.1021/ma035728p · Cited by 70
Chen, J., Hwang, J. V., Ao-Ieong, W.-S., Lin, Y.-C., Hsieh, Y., Cheng, Y., & Wang, J. (2018) · Polymers · doi:10.3390/polym10111263 · Cited by 70
Saudi, A., Rafienia, M., Kharazi, A. Z., Salehi, H., Zarrabi, A., & Karevan, M. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4575 · Cited by 70
Drzewiecki, K. E., Malavade, J. N., Ahmed, I., Lowe, C. J., & Shreiber, D. I. (2017) · TECHNOLOGY · doi:10.1142/s2339547817500091 · Cited by 69
Direct 3D printing of monolithic ion exchange adsorbers
Simon, U., & Dimartino, S. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.12.017 · Cited by 69
Norbornene-modified poly(glycerol sebacate) as a photocurable and biodegradable elastomer
Yeh, Y., Ouyang, L., Highley, C. B., & Burdick, J. A. (2017) · Polymer Chemistry · doi:10.1039/c7py00323d · Cited by 67
Siegenthaler, K. O., & Studer, A. (2006) · Macromolecules · doi:10.1021/ma0513463 · Cited by 66
Ma, X., Dewan, S., Liu, J., Tang, M., Miller, K. L., Yu, C., Lawrence, N., McCulloch, A. D., & Chen, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.026 · Cited by 66
Self-citationZheng, T., Abadi, P. P. S. S., Seo, J., Cha, B.-H., Miccoli, B., Li, Y.-C., Park, K., Park, S., Choi, S., Bayaniahangar, R., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02927 · Cited by 65
Frydrych, M., & Chen, B. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20842g · Cited by 64
Escudero-Castellanos, A., Ocampo‐García, B., García, M. V. D., Flores‐Estrada, J., & Flores‐Merino, M. V. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5793-3 · Cited by 62
Yılmaz, F. (2017) · InTech eBooks · doi:10.5772/65991 · Cited by 61
Thiol-Mediated Chemoselective Strategies for In Situ Formation of Hydrogels
Su, J. (2018) · Gels · doi:10.3390/gels4030072 · Cited by 60
High-fidelity 3D printing using flashing photopolymerization
You, S., Wang, P., Schimelman, J. B., Hwang, H. H., & Chen, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100834 · Cited by 60
Self-citationWang, Z., Jin, X., Tian, Z., Ménard, F., Holzman, J. F., & Kim, K. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701249 · Cited by 57
Dual Crosslinked Gelatin Methacryloyl Hydrogels for Photolithography and 3D Printing
Basara, G., Yue, X. S., & Zorlutuna, P. (2019) · Gels · doi:10.3390/gels5030034 · Cited by 57
Photocrosslinkable biodegradable elastomers based on cinnamate-functionalized polyesters
Zhu, C., Kustra, S., & Bettinger, C. J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.041 · Cited by 54
Tigner, T. J., Rajput, S., Gaharwar, A. K., & Alge, D. L. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01204 · Cited by 53
Poly(Glycerol Sebacate) Elastomer: A Novel Material for Mechanically Loaded Bone Regeneration
Zaky, S. H., Lee, K., Gao, J., et al. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0172 · Cited by 52
Liu, Q., Tian, M., Shi, R., et al. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25606 · Cited by 51
Keirouz, A., Fortunato, G., Zhang, M., Callanan, A., & Radacsi, N. (2019) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2019.06.009 · Cited by 50
Roppolo, I., Frascella, F., Gastaldi, M., Castellino, M., Ciubini, B., Barolo, C., Scaltrito, L., Nicosia, C., Zanetti, M., & Chiappone, A. (2019) · Polymer Chemistry · doi:10.1039/c9py00962k · Cited by 50
Printing 3D Hydrogel Structures Employing Low-Cost Stereolithography Technology
Magalhães, L. S. S. M., dos Santos, F. E. P., Elias, C. D. M. V., Afewerki, S., de Sousa, G. F., Furtado, A. S. A., Marciano, F. R., & Lobo, A. O. (2020) · Journal of Functional Biomaterials · doi:10.3390/jfb11010012 · Cited by 50
Omobono, M. A., Zhao, X., Furlong, M. A., Kwon, C.-H., Gill, T. J., Randolph, M. A., & Redmond, R. W. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35266 · Cited by 49
Sheffield, C., Meyers, K., Johnson, E., & Rajachar, R. M. (2018) · Gels · doi:10.3390/gels4020051 · Cited by 48
Yu, C., Zhu, W. Z., Sun, B., Mei, D., Gou, M., & Chen, S. (2018) · Applied Physics Reviews · doi:10.1063/1.5050245 · Cited by 48
Self-citationBiomimetic poly(glycerol sebacate)/polycaprolactone blend scaffolds for cartilage tissue engineering
Liu, Y., Tian, K., Hao, J., Yang, T., Geng, X., & Zhang, W. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6257-3 · Cited by 47
Characterization of Thiol‐Ene Crosslinked PEG Hydrogels
Toepke, M. W., Impellitteri, N. A., Theisen, J. M., & Murphy, W. L. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200119 · Cited by 44
Hoffmann, A., Leonards, H., Tobies, N., Pongratz, L., Kreuels, K., Kreimendahl, F., Apel, C., Wehner, M. M., & Nottrodt, N. (2017) · Journal of Tissue Engineering · doi:10.1177/2041731417744485 · Cited by 42
Femtosecond laser nanofabrication of hydrogel biomaterial
Zhang, W., & Chen, S. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.275 · Cited by 41
Self-citationA 3D Tissue-Printing Approach for Validation of Diffusion Tensor Imaging in Skeletal Muscle
Berry, D. B., You, S., Warner, J., Frank, L. R., Chen, S., & Ward, S. R. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0438 · Cited by 40
Self-citationYu, S., Shi, J., Liu, Y., Si, J., Yuan, Y., & Liu, C. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00417c · Cited by 37
Wiley, K. L., Ovadia, E. M., Calo, C. J., Huber, R. E., & Kloxin, A. M. (2019) · Polymer Chemistry · doi:10.1039/c9py00447e · Cited by 37
Lü, Y., Sun, J., & Shen, J. (2008) · Langmuir · doi:10.1021/la800998n · Cited by 36
Electrically conducting silver/guar gum/poly(acrylic acid) nanocomposite
Abdel-Halim, E. S., & Al‐Deyab, S. S. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.06.002 · Cited by 36
Qu, X., Zhu, W. Z., Huang, S. C. M., Li, Y.-S. J., Chien, S., Zhang, K., & Chen, S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.009 · Cited by 35
Self-citationBrüning, A., & Kast, R. E. (2014) · Cell Cycle · doi:10.4161/cc.28959 · Cited by 34
Bodakhe, S., Verma, S., Garkhal, K., et al. (2013) · Nanomedicine · doi:10.2217/nnm.12.192 · Cited by 30
Jivan, F., Fabela, N., Davis, Z. G., & Alge, D. L. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01399c · Cited by 28
Poly(glycerol sebacate) films prevent postoperative adhesions and allow laparoscopic placement
Pryor, H. I., O’Doherty, E. M., Hart, A. R., Owens, G. E., Hoganson, D. M., Vacanti, J. P., Masiakos, P. T., & Sundback, C. A. (2009) · Surgery · doi:10.1016/j.surg.2009.04.012 · Cited by 25
(1998) · Biotechnology Advances · doi:10.1016/s0734-9750(98)80001-3 · Cited by 24
Removal of Reactive Orange 16 Dye from Aqueous Solution by Using Modified Kenaf Core Fiber
Obaid, M. K., Abdullah, L. C., & Idan, I. J. (2016) · Journal of Chemistry · doi:10.1155/2016/4262578 · Cited by 22
Wang, M., Lei, D., Liu, Z., Chen, S., Sun, L., Lv, Z., Huang, P., Jiang, Z., & You, Z. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1348927 · Cited by 22
Self-citationJian, B., Wu, W. T., Song, Y., Tan, N., & Ma, C. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s192167 · Cited by 22
Ferrer, C., Vilariño‐Feltrer, G., Rizk, M., et al. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1616197 · Cited by 17
Stereolithography for Personalized Left Atrial Appendage Occluders
Robinson, S. S., Aubin, C. A., Wallin, T. J., Gharaie, S., Xu, P., Wang, K., Dunham, S. N., Mosadegh, B., & Shepherd, R. F. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800233 · Cited by 14
Thiol‐Ene Step‐Growth as a Versatile Route to Functional Polymers
Sarapas, J. M., & Tew, G. N. (2016) · Angewandte Chemie · doi:10.1002/ange.201609023 · Cited by 12
Role of Extracellular Matrix in the Biomechanical Behavior of Pancreatic Tissue
Hudnut, A. W., Lash-Rosenberg, L., Xin, A., Doblado, J. A. L., Zurita‐Lopez, C. I., Wang, Q., & Armani, A. M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00349 · Cited by 9
Photochemistry of polymers: photopolymerization fundamentals and applications
Kannurpatti, A. R., Peiffer, R. W., Guymon, C. A., & Bowman, C. N. (1996) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.245263 · Cited by 6
A study of mask planning in projection-based stereolithography using digital image correlation
Liu, W., Deng, T., Sun, D., Jia, Z., Li, M., & Tang, A. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03778-z · Cited by 4
Cited by
Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials
Weinstain, R., Slanina, T., Kand, D., & Klán, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00663 · Cited by 642
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Chitosan hydrogels in 3D printing for biomedical applications
Rajabi, M., McConnell, M., Cabral, J., & Ali, M. A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117768 · Cited by 351
Metadata
- Authors
- Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-23
- Volume
- 120
- Issue
- 19
- Pages
- 10695-10743
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3019208434
- Cited by
- 579
- References
- 304
- FWCI
- 6.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.