The DOI matches its Crossref record; 304 of the 304 references it cites were found in a registry or an index.
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Open accessAbstract
Since the advent of additive manufacturing, known commonly as 3D printing, this technology has revolutionized the biofabrication landscape and driven numerous pivotal advancements in tissue engineering and regenerative medicine. Many 3D printing methods were developed in short course after Charles Hull first introduced the power of stereolithography to the world. However, materials development was not met with the same enthusiasm and remained the bottleneck in the field for some time. Only in the past decade has there been deliberate development to expand the materials toolbox for 3D printing applications to meet the true potential of 3D printing technologies. Herein, we review the development of biomaterials suited for light-based 3D printing modalities with an emphasis on bioprinting applications. We discuss the chemical mechanisms that govern photopolymerization and highlight the application of natural, synthetic, and composite biomaterials as 3D printed hydrogels. Because the quality of a 3D printed construct is highly dependent on both the material properties and processing technique, we included a final section on the theoretical and practical aspects behind light-based 3D printing as well as ways to employ that knowledge to troubleshoot and standardize the optimization of printing parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Optics: 60th Anniversary Edition
Born, M., & Wolf, E. (2019) · Cambridge University Press eBooks · doi:10.1017/9781108769914 · Cited by 26,251
Molecular Mechanisms of Stress-Responsive Changes in Collagen and Elastin Networks in Skin
Aziz, J., Shezali, H., Radzi, Z., Yahya, N. A., Abu Kassim, N. H., Czernuszka, J., & Rahman, M. T. (2016) · Skin Pharmacology and Physiology · doi:10.1159/000447017 · Cited by 7,323
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hell, S. W., & Wichmann, J. (1994) · Optics Letters · doi:10.1364/ol.19.000780 · Cited by 6,065
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Measurement of photoluminescence quantum yields. Review
Crosby, G. A., & Demas, J. N. (1971) · The Journal of Physical Chemistry · doi:10.1021/j100678a001 · Cited by 4,870
Stöckl, S., Göttl, C., Grifka, J., & Grässel, S. (2013) · Cellular Physiology and Biochemistry · doi:10.1159/000350089 · Cited by 4,656
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
Hoyle, C. E., & Bowman, C. N. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903924 · Cited by 4,182
Collagen Structure and Stability
Shoulders, M. D., & Raines, R. T. (2009) · Annual Review of Biochemistry · doi:10.1146/annurev.biochem.77.032207.120833 · Cited by 3,923
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
Edmondson, R., Broglie, J. J., Adcock, A. F., & Yang, L. (2014) · ASSAY and Drug Development Technologies · doi:10.1089/adt.2014.573 · Cited by 2,515
Structural basis of long-term potentiation in single dendritic spines
Matsuzaki, M., Honkura, N., Ellis-Davies, G. C. R., & Kasai, H. (2004) · Nature · doi:10.1038/nature02617 · Cited by 2,483
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
Ricard-Blum, S. (2011) · Cold Spring Harbor Perspectives in Biology · doi:10.1101/cshperspect.a004978 · Cited by 2,305
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
Hyaluronan: from extracellular glue to pericellular cue
Toole, B. P. (2004) · Nature Reviews Cancer · doi:10.1038/nrc1391 · Cited by 2,125
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Photoremovable Protecting Groups in Chemistry and Biology: Reaction Mechanisms and Efficacy
Klán, P., Šolomek, T., Bochet, C. G., Blanc, A., Givens, R., Rubina, M., Popik, V., Kostikov, A., & Wirz, J. (2013) · Chemical Reviews · doi:10.1021/cr300177k · Cited by 1,827
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Photopolymerizable hydrogels for tissue engineering applications
Nguyen, K. T., & West, J. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00175-8 · Cited by 1,669
Mechanical forces direct stem cell behaviour in development and regeneration
Vining, K. H., & Mooney, D. J. (2017) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm.2017.108 · Cited by 1,656
The Thiol-Michael Addition Click Reaction: A Powerful and Widely Used Tool in Materials Chemistry
Nair, D. P., Podgórski, M., Chatani, S., Gong, T., Xi, W., Fenoli, C. R., & Bowman, C. N. (2014) · Chemistry of Materials · doi:10.1021/cm402180t · Cited by 1,596
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Barczyk, M., Carracedo, S., & Gullberg, D. (2010) · Cell and Tissue Research · doi:10.1007/s00441-009-0834-6 · Cited by 1,512
Thiol–enes: Chemistry of the past with promise for the future
Hoyle, C. E., Lee, T. Y., & Roper, T. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20366 · Cited by 1,457
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Wolf, K., te Lindert, M., Krause, M., Alexander, S., te Riet, J., Willis, A. L., Hoffman, R. M., Figdor, C. G., Weiss, S. J., & Friedl, P. (2013) · Journal of Cell Biology · doi:10.1083/jcb.201210152 · Cited by 1,375
A tough biodegradable elastomer
Wang, Y., Ameer, G. A., Sheppard, B. J., & Langer, R. (2002) · Nature Biotechnology · doi:10.1038/nbt0602-602 · Cited by 1,314
Collagen-Based Biomaterials for Tissue Engineering Applications
Parenteau-Bareil, R., Gauvin, R., & Berthod, F. (2010) · Materials · doi:10.3390/ma3031863 · Cited by 1,256
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Why degradable polymers undergo surface erosion or bulk erosion
Burkersroda, F. V., Schedl, L., & Göpferich, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00170-9 · Cited by 1,146
Collagen-based biomaterials for wound healing
Chattopadhyay, S., & Raines, R. T. (2014) · Biopolymers · doi:10.1002/bip.22486 · Cited by 1,041
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
The extracellular matrix as a biologic scaffold material
Badylak, S. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.04.043 · Cited by 1,022
Design and applications of interpenetrating polymer network hydrogels. A review
Dragan, E. S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.01.065 · Cited by 992
Three-Dimensional Cell Culture: A Breakthrough in Vivo
Antoni, D., Burckel, H., Josset, E., & Noel, G. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16035517 · Cited by 990
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Self-citationThe power of thiol‐ene chemistry
Kade, M. J., Burke, D. J., & Hawker, C. J. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23824 · Cited by 853
Rapid prototyping & manufacturing— Fundamentals of stereolithography
(1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 850
Accordion-like honeycombs for tissue engineering of cardiac anisotropy
Engelmayr, G. C., Cheng, M., Bettinger, C. J., Borenstein, J. T., Langer, R., & Freed, L. E. (2008) · Nature Materials · doi:10.1038/nmat2316 · Cited by 848
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Implant biomaterials: A comprehensive review
Saini, M. (2015) · World Journal of Clinical Cases · doi:10.12998/wjcc.v3.i1.52 · Cited by 844
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Self-citationLowe, A. B. (2014) · Polym. Chem. · doi:10.1039/c4py00339j · Cited by 768
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Koffler, J., Zhu, W., Qu, X., Platoshyn, O., Dulin, J. N., Brock, J., Graham, L., Lu, P., Sakamoto, J., Marsala, M., et al. (2019) · Nature Medicine · doi:10.1038/s41591-018-0296-z · Cited by 708
Self-citationBioprinting of 3D convoluted renal proximal tubules on perfusable chips
Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A. (2016) · Scientific Reports · doi:10.1038/srep34845 · Cited by 699
Das Di‐Isocyanat‐Polyadditionsverfahren (Polyurethane)
Bayer, O. (1947) · Angewandte Chemie · doi:10.1002/ange.19470590901 · Cited by 674
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Applications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 663
A Versatile Synthetic Extracellular Matrix Mimic via Thiol‐Norbornene Photopolymerization
Fairbanks, B. D., Schwartz, M. P., Halevi, A. E., Nuttelman, C. R., Bowman, C. N., & Anseth, K. S. (2009) · Advanced Materials · doi:10.1002/adma.200901808 · Cited by 662
FDA-approved poly(ethylene glycol)–protein conjugate drugs
Alconcel, S. N. S., Baas, A. S., & Maynard, H. D. (2011) · Polymer Chemistry · doi:10.1039/c1py00034a · Cited by 643
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
The Emergence of Thiol–Ene Coupling as a Click Process for Materials and Bioorganic Chemistry
Dondoni, A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200802516 · Cited by 619
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Hyaluronic acid-based hydrogels: from a natural polysaccharide to complex networks
Xu, X., Jha, A. K., Harrington, D. A., Farach-Carson, M. C., & Jia, X. (2012) · Soft Matter · doi:10.1039/c2sm06463d · Cited by 601
Photocrosslinked alginate hydrogels with tunable biodegradation rates and mechanical properties
Jeon, O., Bouhadir, K. H., Mansour, J. M., & Alsberg, E. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.034 · Cited by 592
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Self-citationA biodegradable and biocompatible gecko-inspired tissue adhesive
Mahdavi, A., Ferreira, L., Sundback, C., Nichol, J. W., Chan, E. P., Carter, D. J. D., Bettinger, C. J., Patanavanich, S., Chignozha, L., Ben-Joseph, E., et al. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0712117105 · Cited by 554
Degradability of Polymers for Implantable Biomedical Devices
Lyu, S., & Untereker, D. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10094033 · Cited by 538
Chen, Q.-Z., Bismarck, A., Hansen, U., Junaid, S., Tran, M. Q., Harding, S. E., Ali, N. N., & Boccaccini, A. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.010 · Cited by 530
Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Li, L., Gattass, R. R., Gershgoren, E., Hwang, H., & Fourkas, J. T. (2009) · Science · doi:10.1126/science.1168996 · Cited by 524
Zhu, M., Wang, Y., Ferracci, G., Zheng, J., Cho, N.-J., & Lee, B. H. (2019) · Scientific Reports · doi:10.1038/s41598-019-42186-x · Cited by 483
Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): A review
Rai, R., Tallawi, M., Grigore, A., & Boccaccini, A. R. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.001 · Cited by 477
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Precise Tuning of Facile One-Pot Gelatin Methacryloyl (GelMA) Synthesis
Shirahama, H., Lee, B. H., Tan, L. P., & Cho, N.-J. (2016) · Scientific Reports · doi:10.1038/srep31036 · Cited by 473
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Biodegradable Polyurethanes: Synthesis and Applications in Regenerative Medicine
Guelcher, S. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0133 · Cited by 470
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Carbon Nanotube Reinforced Hybrid Microgels as Scaffold Materials for Cell Encapsulation
Shin, S. R., Bae, H., Cha, J. M., Mun, J. Y., Chen, Y.-C., Tekin, H., Shin, H., Zarabi, S., Dokmeci, M. R., Tang, S., et al. (2012) · ACS Nano · doi:10.1021/nn203711s · Cited by 464
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
Biocompatibility analysis of poly(glycerol sebacate) as a nerve guide material
Sundback, C. A., Shyu, J. Y., Wang, Y., Faquin, W. C., Langer, R. S., Vacanti, J. P., & Hadlock, T. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.004 · Cited by 443
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography
Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N., & McLeod, R. R. (2009) · Science · doi:10.1126/science.1167610 · Cited by 421
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
Pepelanova, I., Kruppa, K., Scheper, T., & Lavrentieva, A. (2018) · Bioengineering · doi:10.3390/bioengineering5030055 · Cited by 416
Kumar, S., Aaron, J., & Sokolov, K. (2008) · Nature Protocols · doi:10.1038/nprot.2008.1 · Cited by 411
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Self-citationProgress in the development of interpenetrating polymer network hydrogels
Myung, D., Waters, D., Wiseman, M., Duhamel, P., Noolandi, J., Ta, C. N., & Frank, C. W. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1134 · Cited by 406
Gough, J. E., Scotchford, C. A., & Downes, S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10145 · Cited by 406
Recent Advances in Photo-Crosslinkable Hydrogels for Biomedical Applications
Choi, J. R., Yong, K. W., Choi, J. Y., & Cowie, A. C. (2019) · BioTechniques · doi:10.2144/btn-2018-0083 · Cited by 403
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Self-citationMicrofabricated Biomaterials for Engineering 3D Tissues
Zorlutuna, P., Annabi, N., Camci‐Unal, G., Nikkhah, M., Cha, J. M., Nichol, J. W., Manbachi, A., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Advanced Materials · doi:10.1002/adma.201104631 · Cited by 394
Self-citationThree-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
In vivo degradation characteristics of poly(glycerol sebacate)
Wang, Y., Kim, Y. M., & Langer, R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10534 · Cited by 389
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Hemocompatibility evaluation of poly(glycerol-sebacate) in vitro for vascular tissue engineering
Motlagh, D., Yang, J., Lui, K. Y., Webb, A. R., & Ameer, G. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.010 · Cited by 375
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Physical properties of alginate hydrogels and their effects on in vitro follicle development
West, E. R., Xu, M., Woodruff, T. K., & Shea, L. D. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.001 · Cited by 371
Polyurethane Elastomer Biostability
Stokes, K., McVenes, R., & Anderson, J. M. (1995) · Journal of Biomaterials Applications · doi:10.1177/088532829500900402 · Cited by 366
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
Zhang, A. P., Qu, X., Soman, P., Hribar, K. C., Lee, J. W., Chen, S., & He, S. (2012) · Advanced Materials · doi:10.1002/adma.201202024 · Cited by 360
Self-citationApplication areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Ozbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 350
Gaharwar, A. K., Dammu, S. A., Canter, J. M., Wu, C.-J., & Schmidt, G. (2011) · Biomacromolecules · doi:10.1021/bm200027z · Cited by 348
Nanoparticle-Hydrogel: A Hybrid Biomaterial System for Localized Drug Delivery
Gao, W., Zhang, Y., Zhang, Q., & Zhang, L. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1583-9 · Cited by 346
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Synthesis and Characterization of Hybrid Hyaluronic Acid-Gelatin Hydrogels
Camci-Unal, G., Cuttica, D., Annabi, N., Demarchi, D., & Khademhosseini, A. (2013) · Biomacromolecules · doi:10.1021/bm3019856 · Cited by 343
Photo-Triggered Click Chemistry for Biological Applications
Herner, A., & Lin, Q. (2016) · Topics in Current Chemistry · doi:10.1007/s41061-015-0002-2 · Cited by 339
Cell‐laden Microengineered and Mechanically Tunable Hybrid Hydrogels of Gelatin and Graphene Oxide
Shin, S. R., Aghaei‐Ghareh‐Bolagh, B., Dang, T. T., Topkaya, S. N., Gao, X., Yang, S. Y., Jung, S. M., Oh, J. H., Dokmeci, M. R., Tang, X. (., et al. (2013) · Advanced Materials · doi:10.1002/adma.201301082 · Cited by 336
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Carlborg, C. F., Haraldsson, T., Öberg, K., Malkoch, M., & van der Wijngaart, W. (2011) · Lab on a Chip · doi:10.1039/c1lc20388f · Cited by 328
Cramer, N. B., Reddy, S. K., O'Brien, A. K., & Bowman, C. N. (2003) · Macromolecules · doi:10.1021/ma034667s · Cited by 327
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Self-citationNorthrop, B. H., & Coffey, R. N. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305441d · Cited by 323
A Blood-Resistant Surgical Glue for Minimally Invasive Repair of Vessels and Heart Defects
Lang, N., Pereira, M. J., Lee, Y., Friehs, I., Vasilyev, N. V., Feins, E. N., Ablasser, K., O’Cearbhaill, E. D., Xu, C., Fabozzo, A., et al. (2014) · Science Translational Medicine · doi:10.1126/scitranslmed.3006557 · Cited by 318
Photoreversible Patterning of Biomolecules within Click‐Based Hydrogels
DeForest, C. A., & Anseth, K. S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106463 · Cited by 315
Gelatin-Based Hydrogels for Organ 3D Bioprinting
Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 315
Kharaziha, M., Nikkhah, M., Shin, S.-R., Annabi, N., Masoumi, N., Gaharwar, A. K., Camci-Unal, G., & Khademhosseini, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.04.045 · Cited by 313
Synthesis and Characterization of Photocurable Elastomers from Poly(glycerol-co-sebacate)
Nijst, C. L. E., Bruggeman, J. P., Karp, J. M., Ferreira, L., Zumbuehl, A., Bettinger, C. J., & Langer, R. (2007) · Biomacromolecules · doi:10.1021/bm070423u · Cited by 295
Rydholm, A. E., Bowman, C. N., & Anseth, K. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.046 · Cited by 290
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Han, D., Lu, Z., Chester, S. A., & Lee, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-20385-2 · Cited by 290
3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
Self-citationCrosslinking of collagen gels by transglutaminase
Orban, J. M., Wilson, L. B., Kofroth, J. A., El‐Kurdi, M. S., Maul, T. M., & Vorp, D. A. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20110 · Cited by 283
Ma, X., Yu, C., Wang, P., Xu, W., Wan, X., Lai, C. S. E., Liu, J., Koroleva-Maharajh, A., & Chen, S. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.026 · Cited by 281
Self-citationLin, C.-C., Raza, A., & Shih, H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.083 · Cited by 273
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
Self-citationTissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
de Beer, M. P., van der Laan, H. L., Cole, M. A., Whelan, R. J., Burns, M. A., & Scott, T. F. (2019) · Science Advances · doi:10.1126/sciadv.aau8723 · Cited by 261
Chemistry and biological applications of photo-labile organic molecules
Yu, H., Li, J., Wu, D., Qiu, Z., & Zhang, Y. (2010) · Chem. Soc. Rev. · doi:10.1039/b901255a · Cited by 260
Two-photon polymerization for biological applications
Nguyen, A. K., & Narayan, R. J. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.004 · Cited by 256
Bioorthogonal Click Chemistry: An Indispensable Tool to Create Multifaceted Cell Culture Scaffolds
Azagarsamy, M. A., & Anseth, K. S. (2013) · ACS Macro Letters · doi:10.1021/mz300585q · Cited by 253
Gelatin hydrogels formed by orthogonal thiol–norbornene photochemistry for cell encapsulation
Mũnoz, Z., Shih, H., & Lin, C.-C. (2014) · Biomater. Sci. · doi:10.1039/c4bm00070f · Cited by 253
Rapid continuous 3D printing of customizable peripheral nerve guidance conduits
Zhu, W., Tringale, K. R., Woller, S. A., You, S., Johnson, S., Shen, H., Schimelman, J., Whitney, M., Steinauer, J., Xu, W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.04.001 · Cited by 253
Self-citationStanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Transparent, elastomeric and tough hydrogels from poly(ethylene glycol) and silicate nanoparticles
Gaharwar, A. K., Rivera, C. P., Wu, C.-J., & Schmidt, G. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.07.023 · Cited by 252
Confining Light to Deep Subwavelength Dimensions to Enable Optical Nanopatterning
Andrew, T. L., Tsai, H.-Y., & Menon, R. (2009) · Science · doi:10.1126/science.1167704 · Cited by 251
Three‐Dimensional Magnetic Assembly of Microscale Hydrogels
Xu, F., Wu, C. M., Rengarajan, V., Finley, T. D., Keles, H. O., Sung, Y., Li, B., Gurkan, U. A., & Demirci, U. (2011) · Advanced Materials · doi:10.1002/adma.201101962 · Cited by 251
Daniele, M. A., Adams, A. A., Naciri, J., North, S. H., & Ligler, F. S. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.11.009 · Cited by 249
Oxygen inhibition in thiol–acrylate photopolymerizations
O'Brien, A. K., Cramer, N. B., & Bowman, C. N. (2006) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.21304 · Cited by 246
Göpferich, A. (1997) · Macromolecules · doi:10.1021/ma961627y · Cited by 245
Genipin‐induced changes in collagen gels: Correlation of mechanical properties to fluorescence
Sundararaghavan, H. G., Monteiro, G. A., Lapin, N. A., Chabal, Y. J., Miksan, J. R., & Shreiber, D. I. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31715 · Cited by 241
Polymers: Chemistry and Physics of Modern Materials, Third Edition
Cowie, J. M. G., & Arrighi, V. (2007) · CRC Press eBooks · doi:10.1201/9781420009873 · Cited by 238
3D printing of biomimetic microstructures for cancer cell migration
Huang, T. Q., Qu, X., Liu, J., & Chen, S. (2014) · Biomedical Microdevices · doi:10.1007/s10544-013-9812-6 · Cited by 237
Self-citationFabrication of Hydrogels with Steep Stiffness Gradients for Studying Cell Mechanical Response
Sunyer, R., Jin, A. J., Nossal, R., & Sackett, D. L. (2012) · PLoS ONE · doi:10.1371/journal.pone.0046107 · Cited by 237
Wang, Y., Ma, M., Wang, J., Zhang, W., Lu, W., Gao, Y., Zhang, B., & Guo, Y. (2018) · Materials · doi:10.3390/ma11081345 · Cited by 232
Mechanism and Modeling of a Thiol−Ene Photopolymerization
Cramer, N. B., Davies, T., O'Brien, A. K., & Bowman, C. N. (2003) · Macromolecules · doi:10.1021/ma034072x · Cited by 231
Pore size variable type I collagen gels and their interaction with glioma cells
Yang, Y.-L., Motte, S., & Kaufman, L. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.039 · Cited by 224
The nitrodibenzofuran chromophore: a new caging group for ultra-efficient photolysis in living cells
Momotake, A., Lindegger, N., Niggli, E., Barsotti, R. J., & Ellis-Davies, G. C. R. (2006) · Nature Methods · doi:10.1038/nmeth821 · Cited by 218
Noh, I., Kim, N., Tran, H. N., Lee, J., & Lee, C. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0152-8 · Cited by 214
An in vitro mechanical and histological study of acute stretching on rabbit tibial nerve
Rydevik, B. L., Kwan, M. K., Myers, R. R., Brown, R. A., Triggs, K. J., Woo, S. L., & Garfin, S. R. (1990) · Journal of Orthopaedic Research® · doi:10.1002/jor.1100080511 · Cited by 209
Visible‐Light‐Mediated Thiol‐Ene Hydrogelation Using Eosin‐Y as the Only Photoinitiator
Shih, H., & Lin, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200605 · Cited by 209
Direct laser writing of 3D scaffolds for neural tissue engineering applications
Melissinaki, V, Gill, A. A., Ortega, I., Vamvakaki, M., Ranella, A., Haycock, J. W., Fotakis, C., Farsari, M., & Claeyssens, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/4/045005 · Cited by 209
Measuring UV curing parameters of commercial photopolymers used in additive manufacturing
Bennett, J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.009 · Cited by 206
Poly-3-hydroxybutyrate (PHB): a resorbable conduit for long-gap repair in peripheral nerves
Young, R. C., Terenghi, G., & Wiberg, M. (2002) · British Journal of Plastic Surgery · doi:10.1054/bjps.2002.3798 · Cited by 204
Hung, K., Tseng, C., & Hsu, S. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400018 · Cited by 202
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
Electrospinning of poly(glycerol sebacate)-based nanofibers for nerve tissue engineering
Hu, J., Kai, D., Ye, H., Tian, L., Ding, X., Ramakrishna, S., & Loh, X. J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.03.035 · Cited by 197
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 197
Kemppainen, J. M., & Hollister, S. J. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32653 · Cited by 190
Tuning and Predicting Mesh Size and Protein Release from Step Growth Hydrogels
Rehmann, M. S., Skeens, K. M., Kharkar, P. M., Ford, E. M., Maverakis, E., Lee, K. H., & Kloxin, A. M. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00781 · Cited by 190
Schade, B., Hagen, V., Schmidt, R., Herbrich, R., Krause, E., Eckardt, T., & Bendig, J. (1999) · The Journal of Organic Chemistry · doi:10.1021/jo9910233 · Cited by 189
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Degradation of poly-L-lactide. Part 1: in vitro and in vivo physiological temperature degradation
Weir, N. A., Buchanan, F. J., Orr, J. F., & Dickson, G. R. (2004) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/0954411041932782 · Cited by 182
Wieboldt, R., Gee, K. R., Niu, L., Ramesh, D., Carpenter, B. K., & Hess, G. P. (1994) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.91.19.8752 · Cited by 179
Hyaluronic Acid Promotes Angiogenesis by Inducing RHAMM-TGFβ Receptor Interaction via CD44-PKCδ
Park, D., Kim, Y., Kim, H., Kim, K., Lee, Y.-S., Choe, J., Hahn, J.-H., Lee, H., Jeon, J., Choi, C., et al. (2012) · Molecules and Cells · doi:10.1007/s10059-012-2294-1 · Cited by 178
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Redenti, S., Neeley, W. L., Rompani, S., Saigal, S., Yang, J., Klassen, H., Langer, R., & Young, M. J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.02.046 · Cited by 176
Chen, Q.-Z., Ishii, H., Thouas, G. A., Lyon, A. R., Wright, J. S., Blaker, J. J., Chrzanowski, W., Boccaccini, A. R., Ali, N. N., Knowles, J. C., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.108 · Cited by 174
Novel polycarbonate-based polyurethane elastomers: Composition–property relationship
Špírková, M., Pavličević, J., Strachota, A., Poreba, R., Bera, O., Kaprálková, L., Baldrian, J., Šlouf, M., Lazić, N., & Budinski-Simendić, J. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.01.001 · Cited by 172
Origin of nanostructural inhomogeneity in polymer-network gels
Seiffert, S. (2017) · Polymer Chemistry · doi:10.1039/c7py01035d · Cited by 172
Poly(glycerol sebacate) biomaterial: synthesis and biomedical applications
Loh, X. J., Karim, A. A., & Owh, C. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01048a · Cited by 170
Lee, B. H., Shirahama, H., Cho, N.-J., & Tan, L. P. (2015) · RSC Advances · doi:10.1039/c5ra22028a · Cited by 170
Additive manufacturing of dental polymers: An overview on processes, materials and applications
JOCKUSCH, J., & ÖZCAN, M. (2020) · Dental Materials Journal · doi:10.4012/dmj.2019-123 · Cited by 169
Hyaluronic Acid Enhances the Mechanical Properties of Tissue-Engineered Cartilage Constructs
Levett, P. A., Hutmacher, D. W., Malda, J., & Klein, T. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0113216 · Cited by 160
Grim, J. C., Brown, T. E., Aguado, B. A., Chapnick, D. A., Viert, A. L., Liu, X., & Anseth, K. S. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00325 · Cited by 160
Biologically useful chelators that take up calcium(2+) upon illumination
Adams, S., Kao, J. P. Y., & Tsien, R. Y. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00202a042 · Cited by 159
Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications
Borzacchiello, A., Russo, L., Malle, B. M., Schwach‐Abdellaoui, K., & Ambrosio, L. (2015) · BioMed Research International · doi:10.1155/2015/871218 · Cited by 154
Zuo, Y., Liu, X., Wei, D., Sun, J., Xiao, W., Zhao, H., Guo, L., Wei, Q., Fan, H., & Zhang, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01433 · Cited by 153
Nong, H. V., Hưng, L. X., Thang, P. N., Chinh, V. Đ., Vu, L. V., Dung, P. T., Trung, T. V., & Nga, P. T. (2016) · SpringerPlus · doi:10.1186/s40064-016-2812-2 · Cited by 151
Composite Biomaterials as Long‐Lasting Scaffolds for 3D Bioprinting of Highly Aligned Muscle Tissue
García‐Lizarribar, A., Fernández‐Garibay, X., Velasco‐Mallorquí, F., Castaño, A. G., Samitier, J., & Ramón‐Azcón, J. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800167 · Cited by 149
Tuning the Poisson's Ratio of Biomaterials for Investigating Cellular Response
Zhang, W., Soman, P., Meggs, K., Qu, X., & Chen, S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202666 · Cited by 145
Self-citationElectro‐Assisted Bioprinting of Low‐Concentration GelMA Microdroplets
Xie, M., Gao, Q., Zhao, H., Nie, J., Fu, Z., Wang, H., Chen, L., Shao, L., Fu, J., Chen, Z., et al. (2018) · Small · doi:10.1002/smll.201804216 · Cited by 145
Miao, S., Cui, H., Nowicki, M. A., Lee, S., de Almeida, J. A. A., Zhou, X., Zhu, W., Yao, X., Masood, F., Plesniak, M. W., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aabe0b · Cited by 141
Self-citationThiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
Dobos, A., Hoorick, J. V., Steiger, W., Gruber, P., Marković, M., Andriotis, O. G., Rohatschek, A., Dubruel, P., Thurner, P. J., Vlierberghe, S. V., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900752 · Cited by 139
Hyperbranched Polyester Hydrogels with Controlled Drug Release and Cell Adhesion Properties
Zhang, H., Patel, A. C., Gaharwar, A. K., Mihaila, S. M., Iviglia, G., Mukundan, S., Bae, H., Yang, H., & Khademhosseini, A. (2013) · Biomacromolecules · doi:10.1021/bm301825q · Cited by 138
Characterization of photocrosslinked alginate hydrogels for nucleus pulposus cell encapsulation
Chou, A. I., & Nicoll, S. B. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32191 · Cited by 135
Gaharwar, A. K., Rivera, C. P., Wu, C., Chan, B. K., & Schmidt, G. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.12.099 · Cited by 133
Characterization of Methacrylated Type-I Collagen as a Dynamic, Photoactive Hydrogel
Gaudet, I. D., & Shreiber, D. I. (2012) · Biointerphases · doi:10.1007/s13758-012-0025-y · Cited by 133
Ravichandran, R., Venugopal, J. R., Sundarrajan, S., Mukherjee, S., & Ramakrishna, S. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0441 · Cited by 132
Chou, A. I., Akintoye, S. O., & Nicoll, S. B. (2009) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2009.04.012 · Cited by 131
Jeong, C. G., & Hollister, S. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.145 · Cited by 131
Li, Y., Cook, W. D., Moorhoff, C. M., Huang, W., & Chen, Q. Z. (2012) · Polymer International · doi:10.1002/pi.4419 · Cited by 130
Hydrogels 2.0: improved properties with nanomaterial composites for biomedical applications
Memić, A., Alhadrami, H. A., Hussain, M. A., Aldhahri, M. M., Nowaiser, F. A., Al-Hazmi, F., Öklü, R., & Khademhosseini, A. (2015) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014104 · Cited by 130
Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction
Chiappone, A., Roppolo, I., Naretto, E., Fantino, E., Calignano, F., Sangermano, M., & Pirri, C. F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.049 · Cited by 129
Li, X., Hong, A., Naskar, N., & Chung, H. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00018 · Cited by 127
Nanoscale 3D printing of hydrogels for cellular tissue engineering
You, S., Li, J., Zhu, W. Z., Yu, C., Mei, D., & Chen, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00301g · Cited by 125
Self-citation
Cited by
Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials
Weinstain, R., Slanina, T., Kand, D., & Klán, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00663 · Cited by 642
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Chitosan hydrogels in 3D printing for biomedical applications
Rajabi, M., McConnell, M., Cabral, J., & Ali, M. A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117768 · Cited by 351
Metadata
- Authors
- Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-23
- Volume
- 120
- Issue
- 19
- Pages
- 10695-10743
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3019208434
- Cited by
- 579
- References
- 304
- FWCI
- 6.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.