The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Phosphate Polyanion Materials as High-Voltage Lithium-Ion Battery Cathode: A Review
Abstract
Followed by decades of successful efforts in developing cathode materials for high specific capacity lithium-ion batteries, currently the attention is on developing a high-voltage battery (>5 V vs Li/Li + ) with an aim to increase the energy density for their many fold advantages over conventional <4 V batteries. Among the various cathode materials, phosphate polyanion materials (LiMPO 4, where M is a single metal or a combination of metals) showed promising candidacy given their high electrochemical potential (4.8–5 V vs Li/Li + ), long cycle stability, low cost, and achieved specific capacity (∼165 mAh·g –1 ) near to its theoretical limit (170 mAh·g –1 ). In this review, factors affecting the electrochemical potential of the cathode materials are reviewed and discussed. Techniques to improve the electrical and ionic conductivities of phosphate polyanion cathodes, namely, surface coating, particle size reduction, doping, and morphology engineering, are also discussed. A processing–property correlation in phosphate polyanion materials is also undertaken to understand relative merits and drawbacks of diverse processing techniques to deliver a material with targeted functionality. Strategies required for high-voltage phosphate polyanion cathode materials are envisioned, which are expected to deliver lithium-ion battery cathodes with higher working potential and gravimetric specific capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Peng, S., Li, L., Han, X., Sun, W., Srinivasan, M., Mhaisalkar, S. G., Cheng, F., Yan, Q., Chen, J., & Ramakrishna, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408876 · Cited by 428
Calculations of Li-Ion Diffusion in Olivine Phosphates
Dathar, G. K. P., Sheppard, D., Stevenson, K. J., & Henkelman, G. (2011) · Chemistry of Materials · doi:10.1021/cm201604g · Cited by 307
Cited by
Khan, F. M. N. U., Rasul, M. G., Sayem, A. S. M., & Mandal, N. K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108033 · Cited by 507
Maximizing energy density of lithium-ion batteries for electric vehicles: A critical review
Khan, F. M. N. U., Rasul, M. G., Sayem, A. S. M., & Mandal, N. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.08.069 · Cited by 300
Metadata
- Authors
- Ling, J., Karuppiah, C., Krishnan, S. G., Reddy, M. V., Misnon, I. I., Ab Rahim, M. H., Yang, C.-C., & Jose, R.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-12
- Volume
- 35
- Issue
- 13
- Pages
- 10428-10450
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W3170340600
- Cited by
- 175
- References
- 3
- FWCI
- 8.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.