Effects of Lignin Content and Temperature on the Properties of Hybrid Poplar Bio-Oil, Char, and Gas Obtained by Fast Pyrolysis
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Eight genetically different hybrid poplar samples with varying lignin content were pyrolyzed at 500 °C using a micropyrolysis unit, which was directly connected to a GC/MS. Four of these hybrid poplar samples with a range of lignin content were then pyrolyzed at temperatures of 550 and 600 °C to determine the effects of pyrolysis temperature on product distribution among bio-oil, char, and gas. At a pyrolysis temperature of 500 °C, an increase in poplar lignin content from 17% to 22% decreased the relative bio-oil yield from 73% to 65%, increased the char yield from 17.5% to 27.2%, and decreased the yield of lignin-derived phenolic species in the bio-oil by 3%. At the higher pyrolysis temperature of 600 °C, there was neither a decrease in the yield of bio-oil nor an increase in the char yield, and there was an increase in the relative abundamnce of bio-oil phenolics compared to the results obtained at 500 °C. According to these results, higher temperatures are needed to increase the yield of bio-oil and the content of phenolic species in bio-oil.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Primary stage of lignin pyrolysis containing more intense structural decomposition happens at the temperature range of 400–600 °C after initial stage, where phenolic compounds (which is both temperature induced and time induced) are the major components during this stage [146–148].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [148]
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
US Department of Energy (USDOE), W., Perlack, R., USDOE Office of Energy Efficiency and Renewable Energy (EERE), O. O. S. T. B. T. O. (., Oak Ridge National Laboratory (ORNL), O. R., USDA, Wright, L., Turhollow, A., Graham, R., Stokes, B., & Erbach, D. (2005) · doi:10.2172/1216415 · Cited by 1,327
Characterization of chars from pyrolysis of lignin
Sharma, R. K., Wooten, J. B., Baliga, V. L., Lin, X., Geoffrey Chan, W., & Hajaligol, M. R. (2004) · Fuel · doi:10.1016/j.fuel.2003.11.015 · Cited by 946
Principles and practice of biomass fast pyrolysis processes for liquids
Bridgwater, A. V. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00005-4 · Cited by 754
The effect of lignin and inorganic species in biomass on pyrolysis oil yields, quality and stability
Fahmi, R., Bridgwater, A. V., Donnison, I., Yates, N., & Jones, J. M. (2008) · Fuel · doi:10.1016/j.fuel.2007.07.026 · Cited by 541
Gani, A., & Naruse, I. (2007) · Renewable Energy · doi:10.1016/j.renene.2006.02.017 · Cited by 537
Research works printed but not linked: 1
- Wannapeera J., 2008, Songklanakarin J. Sci. Technol., 30, 393
Cited by
Cao, L., Yu, I. K. M., Liu, Y., Ruan, X., Tsang, D. C. W., Hunt, A. J., Ok, Y. S., Song, H., & Zhang, S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.08.065 · Cited by 410
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
Ukaew, S., Schoenborn, J., Klemetsrud, B., & Shonnard, D. R. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.021 · Cited by 81
Self-citationGracida-Alvarez, U. R., Mitchell, M. K., Sacramento‐Rivero, J. C., & Shonnard, D. R. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04362 · Cited by 72
Self-citationDivine, D. C., Hubert, S., Epelle, E. I., Ojo, A. U., Adeleke, A. A., Ogbaga, C. C., Akande, O., Okoye, P. U., Giwa, A., & Okolie, J. A. (2024) · Fuel · doi:10.1016/j.fuel.2024.131346 · Cited by 82
Metadata
- Authors
- Klemetsrud, B., Eatherton, D., & Shonnard, D.
- Affiliations
- Michigan Technological University (US)
- Corresponding author
- Klemetsrud, Bethany
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-13
- Volume
- 31
- Issue
- 3
- Pages
- 2879-2886
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2585146776
- Cited by
- 31
- References
- 28
- Citations by year
- 2026: 4 · 2025: 1 · 2024: 6 · 2023: 3 · 2022: 2 · 2021: 2 · 2020: 4 · 2019: 2 · 2018: 6 · 2017: 1
- FWCI
- 1.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Digital Commons - Michigan Tech (Michigan Technological University) (submittedVersion)
- Funders
- National Science Foundation (MSP/CHE-ENG/ECCS-1230803)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Mining and Gasification Technologies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- hybrid poplar, fast pyrolysis, lignin content, pyrolysis temperature, bio-oil yield, char yield, pyrolysis gas, phenolic compounds, woody biomass
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Lignin Content and Temperature on the Properties of Hybrid Poplar Bio-Oil, Char, and Gas Obtained by Fast Pyrolysis. https://app.cochat.ai/papers/10.1021/acs.energyfuels.6b02836
- The paper
- Klemetsrud, B., Eatherton, D., & Shonnard, D. (2017). Effects of Lignin Content and Temperature on the Properties of Hybrid Poplar Bio-Oil, Char, and Gas Obtained by Fast Pyrolysis. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6b02836
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.