CoChat

Selective Water Removal by Sorption from Butanol–Water Vapor Mixtures: Analyses of Key Operating Parameters and Site Energy Distribution

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

Abstract

In the present paper, selective water removal from butanol–water vapor mixture was carried out in a pressure swing adsorption (PSA) system using canola meal (CM) biosorbent. Five operating parameters (temperature, pressure, feed butanol concentration, feed flow rate, and CM particle size) were studied by the orthogonal array design method and range analysis to obtain the favorable process conditions for butanol drying. The performance of butanol dehydration was evaluated using five indices: water uptake, butanol uptake, water selectivity, butanol recovery, and maximum butanol concentration in the effluent. The obtained favorable dehydration conditions resulted in the maximum effluent butanol concentration of >99 v/v %, water uptake of 0.48 g/g-ads, water separation factor of 5.4, and butanol recovery of 90%. The Dubinin–Polanyi model for large pores fit the water adsorption isotherms reasonably well. Furthermore, site energy distribution of water adsorption was also estimated. Average site energy (3.33 kJ/mol) and standard deviation of the site energy distribution (2.36 kJ/mol) were determined and applied to analyze the interaction between the biosorbent and adsorbate, and adsorbent surface energy heterogeneity. Saturated CM was regenerated at 110 °C under vacuum and reused for more than 16 cycles.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.energyfuels.7b00310

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Research works printed but not linked: 9

  1. Shah R. Y., 2011, Int. J. Curr. Sci. Res., 2, 57
  2. Moreira A. R., 1981, Biotechnol. Bioeng. Symp., 11, 567
  3. Boonfung C., 2010, World Acad. Sci. Eng.Technol., 4, 557
  4. Newkirk R., 2014, Canola Meal Feed Industry Guide
  5. Polanyi M., 1920, Z. Elektrochem., 26, 370
  6. Okewale A. O., 2013, Int. J. Appl. Sci. Technol., 3, 35
  7. Theivandran G., 2015, J. Med. Plants Stud., 4, 30
  8. Ruthven, D. M.Principles of Adsorption and Adsorption Processes,firsted.John Wiley & Sons:New York, 1984; pp323–329.
  9. Barshad I., 1960, Clays and Clay Minerals: Proceedings of the Eighth National Conference

Cited by

See all 13

Metadata

Authors
Jayaprakash, D., Dhabhai, R., Niu, C. H., & Dalai, A. K.
Affiliations
University of Saskatchewan (CA)
Corresponding author
Niu, Catherine H.
Venue
Energy & Fuels
Published
2017-04-26
Volume
31
Issue
5
Pages
5193-5202
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2606187577
Cited by
13
References
35
Citations by year
2025: 1 · 2024: 1 · 2022: 2 · 2021: 1 · 2019: 2 · 2018: 6
FWCI
1.70
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Funders
  • Western Grains Research Foundation
  • Ministry of Agriculture - Saskatchewan
  • University of Saskatchewan
  • Mitacs
  • Saskatchewan Canola Development Commission
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
Keywords
butanol dehydration, water removal, pressure swing adsorption, site energy distribution, water adsorption isotherms, water selectivity, biosorbent regeneration, process parameter optimization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.