Effects of Temperature and Equivalence Ratio on Carbon Nanotubes and Hydrogen Production from Waste Plastic Gasification in Fluidized Bed
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The waste plastic gasification in a fluidized bed for a continuous carbon nanotube (CNT) and hydrogen coproduction is a potential method for sustainable management. Ni/Al 2 O 3 catalysts have been synthesized by the impregnation method to upgrade hydrogen production and CNT synthesis. However, few studies investigated the effect of operating parameters for upcycling waste plastics into CNTs and hydrogen in the fluidized-bed system. The reaction temperature and the equivalence ratio (ER) were evaluated for CNT and hydrogen coproduction. Increasing the reaction temperature and lowering the ER enhanced the methane dry reforming, hydrocarbon dry reforming, and hydrocarbon direct decomposition for hydrogen and CNT coproduction. While increasing the reaction temperature from 500 to 700 °C can obtain higher CNT yield and H 2 production rate, the system heated to 700 °C and maintained at this temperature should provide more energy. Moreover, the gas composition at 600 °C with 0.1 ER contained more CH 4 and C 2 –C 5 hydrocarbons compared with that with a higher ER, which could be used as the carbon source of CNTs. The reaction temperature of the fluidized bed in the waste plastic gasification system controlled at 600 °C with 0.1 ER and the gasified products upgraded through a catalytic fixed-bed reactor at 680 °C exhibited an optimal catalytic performance of less-defective CNTs in 22.0% yield and H 2 production rate (385.1 mmol/h-g catalyst).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Gong, J., Liu, J., Jiang, Z., Wen, X., Chen, X., Mijowska, E., Wang, Y., & Tang, T. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.03.112 · Cited by 76
Cited by
Catalytic processing of plastic waste on the rise
Martín, A. J., Mondelli, C., Jaydev, S. D., & Pérez-Ramírez, J. (2021) · Chem · doi:10.1016/j.chempr.2020.12.006 · Cited by 613
Biorenewable hydrogen production through biomass gasification: A review and future prospects
Cao, L., Yu, I. K. M., Xiong, X., Tsang, D. C. W., Zhang, S., Clark, J. H., Hu, C., Ng, Y. H., Shang, J., & Ok, Y. S. (2020) · Environmental Research · doi:10.1016/j.envres.2020.109547 · Cited by 594
Recent progress in controlled carbonization of (waste) polymers
Gong, J., Chen, X., & Tang, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.001 · Cited by 309
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Chai, Y., Gao, N., Wang, M., & Wu, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122947 · Cited by 265
Metadata
- Authors
- Yang, R.-X., Chuang, K.-H., & Wey, M.-Y.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-02
- Volume
- 32
- Issue
- 4
- Pages
- 5462-5470
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2792598827
- Cited by
- 64
- References
- 2
- FWCI
- 1.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Temperature and Equivalence Ratio on Carbon Nanotubes and Hydrogen Production from Waste Plastic Gasification in Fluidized Bed. https://app.cochat.ai/papers/10.1021/acs.energyfuels.7b04109
- The paper
- Yang, R.-X., Chuang, K.-H., & Wey, M.-Y. (2018). Effects of Temperature and Equivalence Ratio on Carbon Nanotubes and Hydrogen Production from Waste Plastic Gasification in Fluidized Bed. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.7b04109
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.