CoChat

Shape Matters: Long-Range Transport of Microplastic Fibers in the Atmosphere

Open access
Tatsii, Daria, Bucci, Silvia, Bhowmick, Taraprasad, Guettler, Johannes, Bakels, Lucie, Bagheri, Gholamhossein, Stohl, Andreas · 2024 · Environmental Science & Technology

The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.

Abstract

The deposition of airborne microplastic particles, including those exceeding 1000 μm in the longest dimension, has been observed in the most remote places on earth. However, their deposition patterns are difficult to reproduce using current atmospheric transport models. These models usually treat particles as perfect spheres, whereas the real shapes of microplastic particles are often far from spherical. Such particles experience lower settling velocities compared to volume equivalent spheres, leading to longer atmospheric transport. Here, we present novel laboratory experiments on the gravitational settling of microplastic fibers in air and find that their settling velocities are reduced by up to 76% compared to those of the spheres of the same volume. An atmospheric transport model constrained with the experimental data shows that shape-corrected settling velocities significantly increase the horizontal and vertical transport of particles. Our model results show that microplastic fibers of about 1 mm length emitted in populated areas are more likely to reach extremely remote regions of the globe, including the high Arctic, which is not the case for spheres of equivalent volume. We also calculate that fibers with lengths of up to 100 μm settle slowly enough to be lifted high into the stratosphere, where degradation by ultraviolet radiation may release chlorine and bromine, thus potentially damaging the stratospheric ozone layer. These findings suggest that the growing environmental burden and still increasing emissions of plastic pose multiple threats to life on earth.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.est.3c08209

Cites

63 of 63 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Example of the particles printed for the experiments and the settling behavior of fibers. (a) Straight, semicircular, and quarter circular 1 mm fibers for different aspect ratios AR and the corresponding diameters deq of volume equivalent spheres (sizes of other printed particles are listed in Table 1). Experimental recording of the gravitational settling behavior of straight fibers of (b) 1 and (e) 2 mm length (L) with an aspect ratio (AR) of 20. The entire recording of the upper cameras TX and TY and the bottom cameras BX and BY is shown in Figure S4, and g shows the gravity direction. The postprocessed time series of (c,f) settling velocity and (d,g) orientation, respectively, for 1 and 2 mm straight fibers from the entire recording. The dots represent the experimental postprocessed data for each camera image, and the averaged experimental data are shown as solid lines. The left half of the vertical dashed lines contains the data from the upper cameras (TX and TY), while the right half corresponds to the same from the bottom cameras (BX and BY). The settling velocity in (c,f) is normalized to the terminal velocity wt (average of the settling velocity from the bottom cameras), which is given in units of m s–1 in the legend. The horizontal dashed line in (d,g) corresponds to the steady-state orientation of the fiber, i.e., 90°.
Figure 1 Example of the particles printed for the experiments and the settling behavior of fibers. (a) Straight, semicircular, and quarter circular 1 mm fibers for different aspect ratios AR and the corresponding diameters deq of volume equivalent spheres (sizes of other printed particles are listed in Table 1). Experimental recording of the gravitational settling behavior of straight fibers of (b) 1 and (e) 2 mm length (L) with an aspect ratio (AR) of 20. The entire recording of the upper cameras TX and TY and the bottom cameras BX and BY is shown in Figure S4, and g shows the gravity direction. The postprocessed time series of (c,f) settling velocity and (d,g) orientation, respectively, for 1 and 2 mm straight fibers from the entire recording. The dots represent the experimental postprocessed data for each camera image, and the averaged experimental data are shown as solid lines. The left half of the vertical dashed lines contains the data from the upper cameras (TX and TY), while the right half corresponds to the same from the bottom cameras (BX and BY). The settling velocity in (c,f) is normalized to the terminal velocity wt (average of the settling velocity from the bottom cameras), which is given in units of m s–1 in the legend. The horizontal dashed line in (d,g) corresponds to the steady-state orientation of the fiber, i.e., 90°.CC BY · PubMed Central
Figure 2 Observed and modeled gravitational settling velocities. (a) Settling velocities as a function of particle size, expressed as the diameter of a sphere of equivalent volume. Modeled values using the shape correction scheme are shown as a black dashed line for spheres and as colored shaded areas covering the range of aspect ratios from 20 to 100 for straight (blue), semicircular (purple), and quarter circular (red) fibers. Experimental mean values for each shape are represented by open markers, coded by color for shape type and by thickness for aspect ratio. The spread in the results of repeated experiments for individual particle types is smaller than the size of the symbols. The inset gives an example of the experimental data spread for a limited size range on a linear velocity scale. Black dots show the calculated settling velocities of spheres. (b) Scatter plot of observed and modeled settling velocities. Modeled values were calculated for random (purple), maximum-drag (pink), and averaged (red) orientations. Black open rhombuses show previously published experimental results by Qi et al.33 and Jayaweera and Cottis (1969).32
Figure 2 Observed and modeled gravitational settling velocities. (a) Settling velocities as a function of particle size, expressed as the diameter of a sphere of equivalent volume. Modeled values using the shape correction scheme are shown as a black dashed line for spheres and as colored shaded areas covering the range of aspect ratios from 20 to 100 for straight (blue), semicircular (purple), and quarter circular (red) fibers. Experimental mean values for each shape are represented by open markers, coded by color for shape type and by thickness for aspect ratio. The spread in the results of repeated experiments for individual particle types is smaller than the size of the symbols. The inset gives an example of the experimental data spread for a limited size range on a linear velocity scale. Black dots show the calculated settling velocities of spheres. (b) Scatter plot of observed and modeled settling velocities. Modeled values were calculated for random (purple), maximum-drag (pink), and averaged (red) orientations. Black open rhombuses show previously published experimental results by Qi et al.33 and Jayaweera and Cottis (1969).32CC BY · PubMed Central
Figure 3 Characteristics of microplastic transport in the atmosphere. Shown are FLEXPART model simulation results for three release points and for microplastic particles with an equivalent diameter of 75 μm for spheres (pink) and straight fibers with an aspect ratio of 100 (blue). (a) Annual mean total deposition from the atmosphere for spheres and fibers. The values of the mass density are limited to 10–6 μg/m3/year, and the full range of values is shown in Figure S7. (b) Annual mean values of the horizontal transport distances (colored bars) and their standard deviation (whiskers) for spheres and fibers released from the three points. (c) Decrease of the atmospheric microplastic burden as a function of time after release of spheres and fibers from the three points, with the solid lines showing the median values and the shading indicating the range between the 25th and 75th percentiles.
Figure 3 Characteristics of microplastic transport in the atmosphere. Shown are FLEXPART model simulation results for three release points and for microplastic particles with an equivalent diameter of 75 μm for spheres (pink) and straight fibers with an aspect ratio of 100 (blue). (a) Annual mean total deposition from the atmosphere for spheres and fibers. The values of the mass density are limited to 10–6 μg/m3/year, and the full range of values is shown in Figure S7. (b) Annual mean values of the horizontal transport distances (colored bars) and their standard deviation (whiskers) for spheres and fibers released from the three points. (c) Decrease of the atmospheric microplastic burden as a function of time after release of spheres and fibers from the three points, with the solid lines showing the median values and the shading indicating the range between the 25th and 75th percentiles.CC BY · PubMed Central
Figure 4 Shape dependence of global microplastic deposition and vertical distribution in the atmosphere. Shown are results for particles with an equivalent diameter of 75 μm that only deviate in their shape, for (a,e) spheres and (b,f) straight fibers with an aspect ratio of 100 and hygroscopicity: hydrophobic (a–d) and hydrophilic (e–h) microplastics. Zonal median atmospheric mass concentration of microplastics as a function of latitude and altitude for (c,g) spheres and (d,h) straight fibers with an aspect ratio of 100. The dashed red line indicates the tropopause height, extracted from ERA5 reanalysis data.47
Figure 4 Shape dependence of global microplastic deposition and vertical distribution in the atmosphere. Shown are results for particles with an equivalent diameter of 75 μm that only deviate in their shape, for (a,e) spheres and (b,f) straight fibers with an aspect ratio of 100 and hygroscopicity: hydrophobic (a–d) and hydrophilic (e–h) microplastics. Zonal median atmospheric mass concentration of microplastics as a function of latitude and altitude for (c,g) spheres and (d,h) straight fibers with an aspect ratio of 100. The dashed red line indicates the tropopause height, extracted from ERA5 reanalysis data.47CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 63 references

Research works printed but not linked: 2

  1. Bhowmick T., 2023, Phys. Rev. Lett.
  2. 10.7927/H49C6VHwebW · doi:10.7927/h49c6vhwebw

Cited by

See all 181

Metadata

Authors
Tatsii, D., Bucci, S., Bhowmick, T., Guettler, J., Bakels, L., Bagheri, G., & Stohl, A.
Affiliations
  • University of Vienna (AT)
  • Max Planck Institute for Dynamics and Self-Organization (DE)
  • Laboratory for Fluid Physics, Pattern Formation and Biocomplexity, Max Planck Institute for Dynamics and Self-Organisation, Am Faßberg 17, 37077 Göttingen, Germany
Corresponding author
  • Tatsii, Daria
  • Bagheri, Gholamhossein
Venue
Environmental Science & Technology
Published
2023-12-27
Volume
58
Issue
1
Pages
671-682
ISSN
  • 0013-936X (ISSN-L)
  • 1520-5851
OpenAlex
W4390265298
Cited by
181
References
63
Citations by year
2026: 87 · 2025: 64 · 2024: 30
FWCI
11.98
Type
journal article
Language
en
Open access
Locations
  • Environmental Science & Technology (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion, cc-by)
  • UnitusOpen (Tuscia University) (submittedVersion)
  • GoeScholar The Publication Server of the Georg-August-Universität Göttingen (Georg-August-Universität Göttingen) (submittedVersion, cc-by)
  • arXiv (Cornell University) (cc-by)
Funders
  • Austrian Science Fund (P 34170-N)
  • Deutsche Forschungsgemeinschaft (463393443)
  • Universit?t Wien
  • HORIZON EUROPE Marie Sklodowska-Curie Actions (675675)
Topics
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Atmospheric chemistry and aerosols
  • Physical Sciences › Environmental Science › Global and Planetary Change › Atmospheric aerosols and clouds
Keywords
microplastic fibers, atmospheric transport, particle shape, long-range transport, atmospheric deposition, stratospheric transport, stratospheric ozone depletion, UV degradation, atmospheric transport modeling, plastic pollution
MeSH terms
Microplastics, Atmosphere, Environmental Monitoring, Plastics, Ultraviolet Rays, Water Pollutants, Chemical

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.