Efficient and Selective Uptake of TcO4– by a Cationic Metal–Organic Framework Material with Open Ag+ Sites

Abstract

99 Tc is one of the most problematic radioisotopes in used nuclear fuel owing to its combined features of high fission yield, long half-life, and high environmental mobility. There are only a handful of functional materials that can remove TcO 4 – anion from aqueous solution and identifying for new, stable materials with high anion-exchange capacities, fast kinetics, and good selectivity remains a challenge. We report here an 8-fold interpenetrated three-dimensional cationic metal–organic framework material, SCU-100, which is assembled from a tetradentate neutral nitrogen-donor ligand and two-coordinate Ag + cations as potential open metal sites. The structure also contains a series of 1D channels filled with unbound nitrate anions. SCU-100 maintains its crystallinity in aqueous solution over a wide pH range from 1 to 13 and exhibits excellent β and γ radiation-resistance. Initial anion exchange studies show that SCU-100 is able to both quantitatively and rapidly remove TcO 4 – from water within 30 min. The exchange capacity for the surrogate ReO 4 – reaches up to 541 mg/g and the distribution coefficient K d is up to 1.9 × 10 5 mL/g, which are significantly higher than all previously tested inorganic anion sorbent materials. More importantly, SCU-100 can selectively capture TcO 4 – in the presence of large excess of competitive anions (NO 3 –, SO 4 2–, CO 3 2–, and PO 4 3– ) and remove as much as 87% of TcO 4 – from the Hanford low-level waste melter off-gas scrubber simulant stream within 2 h. The sorption mechanism is well elucidated by single crystal X-ray diffraction, showing that the sorbed ReO 4 – anion is able to selectively coordinate to the open Ag + sites forming Ag–O–Re bonds and a series of hydrogen bonds. This further leads to a single-crystal-to-single-crystal transformation from an 8-fold interpenetrated framework with disordered nitrate anions to a 4-fold interpenetrated framework with fully ordered ReO 4 – anions. This work represents a practical case of TcO 4 – removal by a MOF material and demonstrates the promise of using this type of material as a scavenger for treating anionic radioactive contaminants during the nuclear waste partitioning and remediation processes.