Coupled Sulfur and Iron(II) Carbonate-Driven Autotrophic Denitrification for Significantly Enhanced Nitrate Removal
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Sulfur-based denitrification process has attracted increasing attentions because it does not rely on the external addition of organics and avoids the risk of COD exceeding the limit. Traditionally, limestone is commonly employed to maintain a neutral condition (SLAD process), but it may reduce the efficiency as the occupied zone by limestone cannot directly contribute to the denitrification. In this study, we propose a novel sulfur-based denitrification process by coupling with iron(II) carbonate ore (SICAD system). The ore was demonstrated to play roles as the buffer agent and additional electron donor. Moreover, the acid produced through sulfur driven denitrification was found to promote the Fe(II) leaching from the ore and likely extend the reaction zone from the surface to the liquid. As a result, more biomass was accumulated in the SICAD system compared with the controls (sulfur, iron(II) carbonate ore and SLAD systems). Owing to these synergistic effects of sulfur and iron(II) carbonate on denitrification, SICAD system showed much higher denitrification rate (up to 720.35 g·N/m 3 ·d) and less accumulation of intermediates (NO 2 – and N 2 O) than the controls. Additionally, sulfate production in SICAD system was reduced. These findings offer great potential of SICAD system for practical use as a highly efficient postdenitrification process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultra-high-throughput microbial community analysis on the Illumina HiSeq and MiSeq platforms
Caporaso, J. G., Lauber, C. L., Walters, W. A., Berg-Lyons, D., Huntley, J., Fierer, N., Owens, S. M., Betley, J., Fraser, L., Bauer, M., et al. (2012) · The ISME Journal · doi:10.1038/ismej.2012.8 · Cited by 8,839
Lovley, D. R., & Phillips, E. J. P. (1988) · Applied and Environmental Microbiology · doi:10.1128/aem.54.6.1472-1480.1988 · Cited by 2,395
Dissimilatory Fe(III) and Mn(IV) Reduction
Lovley, D. R., Holmes, D. E., & Nevin, K. P. (2004) · Advances in Microbial Physiology · doi:10.1016/s0065-2911(04)49005-5 · Cited by 1,471
Coates, J. D., Ellis, D. J., Gaw, C. V., & Lovley, D. R. (1999) · International Journal of Systematic and Evolutionary Microbiology · doi:10.1099/00207713-49-4-1615 · Cited by 382
Fleming, E. J., Davis, R. E., McAllister, S. M., Chan, C. S., Moyer, C. L., Tebo, B. M., & Emerson, D. (2013) · FEMS Microbiology Ecology · doi:10.1111/1574-6941.12104 · Cited by 72
Cited by
Technologies for biological removal and recovery of nitrogen from wastewater
Rahimi, S., Modin, O., & Mijakovic, I. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107570 · Cited by 474
Metadata
- Authors
- Zhu, T.-T., Cheng, H.-Y., Yang, L.-H., Su, S.-G., Wang, H.-C., Wang, S.-S., & Wang, A.-J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-31
- Volume
- 53
- Issue
- 3
- Pages
- 1545-1554
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2907266146
- Cited by
- 199
- References
- 5
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.