The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Satellite-Derived 1-km-Resolution PM1 Concentrations from 2014 to 2018 across China
Abstract
Particulate matter with aerodynamic diameters ≤1 μm (PM 1 ) has a greater impact on the human health but has been less studied due to fewer ground observations. This study attempts to improve the retrieval accuracy and spatial resolution of satellite-based PM 1 estimates using the new ground-based monitoring network in China. Therefore, a space-time extremely randomized trees (STET) model is first developed to estimate PM 1 concentrations at a 1 km spatial resolution from 2014 to 2018 across mainland China. The STET model can derive daily PM 1 concentrations with an average across-validation coefficient of determination of 0.77, a low root-mean-square error of 14.6 μg/m 3, and a mean absolute error of 8.9 μg/m 3 . PM 1 concentrations are generally low in most areas of China, except for the North China Plain and Sichuan Basin where intense human activities and poor natural conditions are prevalent, especially in winter. Moreover, PM 1 pollution has greatly decreased over the past 5 years, benefiting from emission control in China. The STET model, incorporating the spatiotemporal information, shows superior performance in PM 1 estimates relative to previous studies. This high-resolution and high-quality PM 1 data set in China (i.e., ChinaHighPM 1 ) can be greatly useful for air pollution studies in medium- or small-scale areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sensitivity Analysis of k-Fold Cross Validation in Prediction Error Estimation
Rodriguez, J. D., Perez, A., & Lozano, J. A. (2010) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2009.187 · Cited by 1,890
Cited by
Wei, J., Li, Z., Lyapustin, A., Sun, L., Peng, Y., Xue, W., Su, T., & Cribb, M. (2021) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112136 · Cited by 1,346
Self-citationWei, J., Li, Z., Cribb, M., Huang, W., Xue, W., Sun, L., Guo, J., Peng, Y., Li, J., Lyapustin, A., et al. (2020) · Atmospheric Chemistry and Physics · doi:10.5194/acp-20-3273-2020 · Cited by 706
Self-citationMachine Learning in Environmental Research: Common Pitfalls and Best Practices
Zhu, J.-J., Yang, M., & Ren, Z. J. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c00026 · Cited by 672
Wei, J., Li, Z., Xue, W., Sun, L., Fan, T., Liu, L., Su, T., & Cribb, M. (2021) · Environment International · doi:10.1016/j.envint.2020.106290 · Cited by 511
Self-citationShi, H., Zhang, J., Zhao, B., Xia, X., Hu, B., Chen, H., Wei, J., Liu, M., Bian, Y., Fu, D., et al. (2021) · Geophysical Research Letters · doi:10.1029/2020gl091105 · Cited by 44
Self-citation
Metadata
- Authors
- Wei, J., Li, Z., Guo, J., Sun, L., Huang, W., Xue, W., Fan, T., & Cribb, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-14
- Volume
- 53
- Issue
- 22
- Pages
- 13265-13274
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2981043630
- Cited by
- 338
- References
- 1
- FWCI
- 14.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.