Construction and Commissioning of a Continuous Reactor for Hydrothermal Liquefaction
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The purpose of this paper is to give a comprehensive description of the construction and commissioning of a continuous reactor system for hydrothermal liquefaction of biomass. The basis is a newly established facility at Aarhus University. It is capable of handling viscous biomass slurries and features a novel induction-based heating method that facilitates well-defined reaction environments. Carbon balance closure is obtained as all product fractions are recovered and positively quantified. The paper includes a residence time distribution measurement and a 24 h proof-of-concept experiment conducted at 350 °C, 250 bar, and 15 min reaction time. It is based on the biomass dried distillers grains with solubles, a waste product of the bioethanol industry. The experiment seeks to determine the steady-state characteristics of the continuous reactor system for use in future experimental studies. It was found that steady state occurs within 6 h. Furthermore, data sampling windows of 2.1 h were found to mask the intrinsic variations of the system while still exposing trends. At steady state, the oil mass yield was found to be 38.9 ± 3.2% and the higher heating value was 35.3 ± 0.28 MJ kg –1 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Process development for hydrothermal liquefaction of algae feedstocks in a continuous-flow reactor
Elliott, D. C., Hart, T. R., Schmidt, A. J., Neuenschwander, G. G., Rotness, L. J., Olarte, M. V., Zacher, A. H., Albrecht, K. O., Hallen, R. T., & Holladay, J. E. (2013) · Algal Research · doi:10.1016/j.algal.2013.08.005 · Cited by 472
Cited by
Valorization of hydrothermal liquefaction aqueous phase: pathways towards commercial viability
Watson, J., Wang, T., Si, B., Chen, W.-T., Aierzhati, A., & Zhang, Y. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100819 · Cited by 394
Continuous Hydrothermal Liquefaction of Biomass: A Critical Review
Castello, D., Pedersen, T. H., & Rosendahl, L. A. (2018) · Energies · doi:10.3390/en11113165 · Cited by 343
“K2CO3 was utilized as a homogeneous catalyst and pellets of ZrO2 were used in the reactor as heterogeneous catalyst.”
InfluentialBasar, I. A., Liu, H., Carrere, H., Trably, E., & Eskicioglu, C. (2021) · Green Chemistry · doi:10.1039/d0gc04092d · Cited by 253
Effect of hydrothermal liquefaction aqueous phase recycling on bio-crude yields and composition
Biller, P., Madsen, R. B., Klemmer, M., Becker, J., Iversen, B. B., & Glasius, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.08.053 · Cited by 206
Self-citationMagdeldin, M., Kohl, T., & Järvinen, M. (2017) · Energy · doi:10.1016/j.energy.2017.06.166 · Cited by 69
Recent advances in hydroliquefaction of biomass for bio-oil production using in situ hydrogen donors
Zhao, B., Hu, Y., Gao, J., Zhao, G., Ray, M. B., & Xu, C. C. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01649 · Cited by 56
Madsen, R. B., Lappa, E., Christensen, P. S., Jensen, M. M., Klemmer, M., Becker, J., Iversen, B. B., & Glasius, M. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.10.003 · Cited by 12
Self-citation
Metadata
- Authors
- Mørup, A. J., Becker, J., Christensen, P. S., Houlberg, K., Lappa, E., Klemmer, M., Madsen, R. B., Glasius, M., & Iversen, B. B.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-28
- Volume
- 54
- Issue
- 22
- Pages
- 5935-5947
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2502788819
- Cited by
- 63
- References
- 2
- FWCI
- 3.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.