Yield of Phenolic Monomers from Lignin Hydrothermolysis in Subcritical Water System
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Lignin is the most noncellulosic based abundant natural organic polymer with the highest number of aromatic units. It is mainly extracted from wood in the Kraft pulping process and used as boiler fuel. However, the number of high-value applications of lignin remains small. The aim of this study is to explore the yield of phenolic monomers from lignin hydrothermal conversion in subcritical water. The hydrothermal experiments were carried out at different subcritical conditions to explore the influence of reaction temperature (200–350 °C), time (0–60 min), and lignin to water ratio (1:10–1:80). The results show that the yields of bio-oils (sum of crude-oil and water-soluble organics regarded as light-oil) with a range of 28.9–44.7 wt % (of dry lignin fed) were strongly influenced by these operating parameters. The crude-oil contained a small amount of monomers (0.1–2.8 wt % of lignin), whereas a large amount of monomers was composed in the light-oil (1.2–6.3 wt % of lignin). The most abundant monomers produced from hydrothermal reactions were guaiacol and cate-chol, with the highest yields of 1.18 wt % (11.8 mg/g at 300 °C) and 1.88 wt % (18.8 mg/g at 350 °C), respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrothermal conversion of lignin: A review
Kang, S., Li, X., Fan, J., & Chang, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.013 · Cited by 552
Nguyen, T. D. H., Maschietti, M., Belkheiri, T., Åmand, L.-E., Theliander, H., Vamling, L., Olausson, L., & Andersson, S.-I. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2013.11.022 · Cited by 99
Arturi, K. R., Strandgaard, M., Nielsen, R. P., Søgaard, E. G., & Maschietti, M. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.12.015 · Cited by 99
Cited by
The current and emerging sources of technical lignins and their applications
Li, T., & Takkellapati, S. (2018) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1913 · Cited by 264
Hydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Hydrothermal liquefaction of lignin to aromatic chemicals: impact of lignin structure
Cao, Y., Zhang, C., Tsang, D. C. W., Fan, J., Clark, J. H., & Zhang, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01617 · Cited by 128
Rana, M., Taki, G., Islam, M. N., Agarwal, A., Jo, Y.-T., & Park, J.-H. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00808 · Cited by 41
Self-citationSulfur contaminations inhibit depolymerization of Kraft lignin
Daniel, D., Khachatryan, L., Astete, C., Asatryan, R., Marculescu, C., & Boldor, D. (2019) · Bioresource Technology Reports · doi:10.1016/j.biteb.2019.100341 · Cited by 29
Metadata
- Authors
- Islam, M. N., Taki, G., Rana, M., & Park, J.-H.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-19
- Volume
- 57
- Issue
- 14
- Pages
- 4779-4784
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2789694511
- Cited by
- 45
- References
- 3
- FWCI
- 1.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Yield of Phenolic Monomers from Lignin Hydrothermolysis in Subcritical Water System. https://app.cochat.ai/papers/10.1021/acs.iecr.7b05062
- The paper
- Islam, M. N., Taki, G., Rana, M., & Park, J.-H. (2018). Yield of Phenolic Monomers from Lignin Hydrothermolysis in Subcritical Water System. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.7b05062
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.