Functionalized Aramid Fibers and Composites for Protective Applications: A Review
Open accessThe DOI matches its Crossref record.
Abstract
Technological growth in advanced ammunition and weapons has led to development of protective antiballistic composites, which are mostly based on aramid fibers, as they absorb high impact energy, arising from penetrators. Enhanced performance of aramid fibers (modulus ∼ 112,400 MPa) is attributed to their compact molecular structure, hydrogen-bonding, high crystallinity, and high density (∼1.44 g/cm 3 ). Methodologies such as layer-by-layer, shear thickening, yarn pull-out, and surface functionalization via nanomaterials have been reported for modification of aramid fibers, which are widely used with thermosets like epoxy (due to process-friendliness). Recently, researchers are exploring thermoplastics with aramids, due to their higher toughness, chemical resistance, and thermal stability. Modification of aramid fibers is mostly performed using nanomaterials, e.g., carbon nanotubes, graphene, silk fibroins, SiO 2, and ZnO, for enhancing their performance and minimizing fiber buckling under load. This Review presents advances in modification of aramid fibers using nanomaterials with emphasis on thermoplastics for protective applications, their stress transfer mechanisms, and life cycle analysis and concludes with their recycling/recovery methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Effect of microplastics in water and aquatic systems
Issac, M. N., & Kandasubramanian, B. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-13184-2 · Cited by 835
Self-citationNanocellulose based biodegradable polymers
Zinge, C., & Kandasubramanian, B. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109758 · Cited by 322
Self-citationSilk fibroin as adjuvant in the fabrication of mechanically stable fibrin biocomposites
El Maachi, I., Kyriakou, S., Rütten, S., Kopp, A., Köpf, M., Jockenhoevel, S., & Fernández-Colino, A. (2022) · Polymers · doi:10.3390/polym14112251 · Cited by 7
“Therefore, the development of advanced materials, capable of mimicking the native extracellular matrix (ECM) and/or promote new tissue formation, is pivotal for the progress of TE [1].”
Background
Metadata
- Authors
- Gore, P. M., & Kandasubramanian, B.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-11-15
- Volume
- 57
- Issue
- 49
- Pages
- 16537-16563
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2901841817
- Cited by
- 211
- References
- 0
- FWCI
- 6.24
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.