The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
The Strengthening Role of the Amino Group in Metal–Organic Framework MIL-53 (Al) for Methylene Blue and Malachite Green Dye Adsorption
Abstract
In this paper, two kinds of metal–organic frameworks (MOFs), MIL-53(Al) and MIL-53(Al)-NH 2, were synthesized. Then these MOFs were used to remove methylene blue and malachite green dyes from aqueous solution. Characterizations of MOFs were carried out by X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectrometry, and zeta potential. Experimental results showed that MIL-53(Al)-NH 2 can rapidly bind to the two kinds of cationic dyes from aqueous solution with high adsorption capacity. However, the adsorption capacity of MIL-53(Al) for cationic dyes is extremely low. The adsorptive selectivity of MIL-53(Al)-NH 2 to the cationic dyes resulted from the hydrogen bonding interaction between amimo groups of the dyes molecule and the MIL-53(Al)-NH 2, while the extremely low adsorption capacity of MIL-53(Al) for the dyes may be main caused by the “breathing” behavior of MIL-53(Al). The factors including adsorption time, temperature, and the pH of solution that affected adsorption of the two dyes on MIL-53(Al)-NH 2 were studied. Pseudo first-order kinetic, pseudo second-order kinetic, and Weber–Morris models were used to fit the adsorption data, and the pseudo second-order kinetic model showed a better fit for the adsorption of methylene blue and malachite green than that of the pseudo first-order kinetic model. Furthermore, the internal diffusion model which represented by Weber-Morris model was involved in the step of speed control, but it was not the only speed control step, while out-diffusion also played an important role in the adsorption process. The adsorption isotherm and thermodynamics of methylene blue and malachite green on MIL-53(Al)-NH 2 were also studied. The adsorption of methylene blue and malachite green dyes on MIL-53(Al)-NH 2 can be fitted to both Langmuir and Freundlich isotherm, but the former was better than the latter. The adsorption thermodynamic experiments demonstrated that adsorption reaction was spontaneous and endothermic. Finally, according to the experimental phenomenon, the possible mechanism of adsorption was proposed. Besides, the used adsorbent can be reused for adsorptive removal through simply washing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357
Brillas, E., & Martínez-Huitle, C. A. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.11.016 · Cited by 2,009
Hasan, Z., & Jhung, S. H. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.046 · Cited by 1,428
Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review
Khan, N. A., Hasan, Z., & Jhung, S. H. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.011 · Cited by 1,398
Adsorptive removal of dyes from aqueous solution onto carbon nanotubes: A review
Gupta, V. K., Kumar, R., Nayak, A., Saleh, T. A., & Barakat, M. A. (2013) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2013.03.003 · Cited by 1,253
Haque, E., Jun, J. W., & Jhung, S. H. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.035 · Cited by 1,159
Adsorption of methylene blue on kaolinite
Ghosh, D., & Bhattacharyya, K. G. (2002) · Applied Clay Science · doi:10.1016/s0169-1317(01)00081-3 · Cited by 850
Jian, M., Liu, B., Zhang, G., Liu, R., & Zhang, X. (2015) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.10.023 · Cited by 564
Selective adsorption of cationic dyes by UiO-66-NH2
Chen, Q., He, Q., Lv, M., Xü, Y., Yang, H., Liu, X., & Wei, F. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.11.103 · Cited by 544
Enzymatic decolorization and degradation of azo dyes – A review
Singh, R. L., Singh, P. K., & Singh, R. P. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.04.027 · Cited by 543
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Abdi, J., Vossoughi, M., Mahmoodi, N. M., & Alemzadeh, I. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.054 · Cited by 696
Nanocatalysts and other nanomaterials for water remediation from organic pollutants
Lu, F., & Astruc, D. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213180 · Cited by 682
Alqadami, A. A., Naushad, M., Alothman, Z. A., & Ghfar, A. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10768 · Cited by 550
Ahmed, I., & Jhung, S. H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.115 · Cited by 509
Adsorptive removal of dyes from wastewater using a metal-organic framework: A review
Uddin, M. J., Ampiaw, R. E., & Lee, W. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131314 · Cited by 451
Alqadami, A. A., Naushad, M., Alothman, Z. A., & Ahamad, T. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.05.090 · Cited by 390
Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification
Rego, R. M., Sriram, G., Ajeya, K. V., Jung, H.-Y., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125941 · Cited by 386
Haleem, A., Shafiq, A., Chen, S.-Q., & Nazar, M. (2023) · Molecules · doi:10.3390/molecules28031081 · Cited by 374
Molavi, H., Hakimian, A., Shojaei, A., & Raeiszadeh, M. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.189 · Cited by 337
Extensive and selective adsorption of ZIF-67 towards organic dyes: Performance and mechanism
Du, X.-D., Wang, C.-C., Liu, J.-G., Zhao, X.-D., Zhong, J., Li, Y.-X., Li, J., & Wang, P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.073 · Cited by 313
Ionic liquids and deep eutectic solvents in wastewater treatment: recent endeavours
Sarkar, A., & Pandey, S. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-023-04865-1 · Cited by 14
Metadata
- Authors
- Li, C., Xiong, Z., Zhang, J., & Wu, C.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-28
- Volume
- 60
- Issue
- 11
- Pages
- 3414-3422
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2511756781
- Cited by
- 354
- References
- 27
- FWCI
- 12.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.