Competitive Stereocomplexation, Homocrystallization, and Polymorphic Crystalline Transition in Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Blends: Molecular Weight Effects
The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Abstract
Competitive crystallization kinetics, polymorphic crystalline structure, and transition of poly(l-lactic acid)/poly(d-lactic acid) (PLLA/PDLA) racemic blends with a wide range of molecular weights (MWs) were symmetrically investigated. Stereocomplex (sc) crystallites are exclusively formed in the low-MW racemic blends. However, stereocomplexation is remarkably depressed, and homocrystallization becomes prevailing with increasing MWs of PLLA and PDLA. Suppressed stereocomplexation in high-MW (HMW) racemic blends is proposed to be due to the low chain diffusion ability and restricted intermolecular crystal nucleation/growth. Equilibrium melting point of sc crystallites first increases and then decreases as MW increases. Crystallinity and relative fraction of sc crystallites in racemic blends enhance with crystallization temperature (Tc), and the sc crystallites are merely formed at Tc > 170 °C because of their higher thermodynamic stability. In situ wide-angle X-ray diffraction (WAXD) analysis reveals that the stereocomplexation and homocrystallization are successive rather than completely simultaneous, and the stereocomplexation is preceding homocrystallization in isothermal crystallization of HMW racemic blends. Both initial crystalline structure of homocrystallites (hc) and MW influence the heating-induced hc-to-sc transition of HMW racemic blend drastically; the hc-to-sc transition becomes easier with decreasing Tc and MW. After crystallization at the same temperature, sc crystallites show smaller long period than their hc counterparts.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Stereocomplex Formation between Enantiomeric Poly(lactide)s
박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Lorenzo, A. T., Arnal, M. L., Albuerne, J., & Müller, A. J. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.10.005 · Cited by 699
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Self-citation
Research works printed but not linked: 1
- Loomis G. L., 1990, Polym. Prepr., 31, 55
Cited by
Items 201–230 of 230
Peng, Q., Li, S., Liu, F., Guo, M., Li, G., & Liao, X. (2025) · Polymer · doi:10.1016/j.polymer.2025.129028 · Cited by 2
Shi, W., Mo, J., Cao, Y., Liu, H., Li, Z., Shao, C., Dong, B., Liu, C., & Chang, B. (2025) · Polymer · doi:10.1016/j.polymer.2025.129222 · Cited by 3
Chen, Q., Mithani, M., Auras, R. A., Kirkensgaard, J. J. K., & Uysal‐Unalan, I. (2026) · RSC Applied Polymers · doi:10.1039/d4lp00319e · Cited by 2
Li, W., Dehghani, S., Li, B., & Srithep, Y. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70714 · Cited by 2
Ray, S. S., & Banerjee, R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85868-7.00004-4 · Cited by 2
Mechanism of Improved Crystallizability of Poly(L‐Lactic Acid) by Plasticizers
Tanaka, H., Diep, P. T. N., Sasaki, S., & Sakurai, S. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250791 · Cited by 1
Sun, C., Huang, Z., Jin, F., Hosseini, L. R., Peng, B., Pan, P., & Miyoshi, T. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00574 · Cited by 1
Self-citationZeng, C., Li, M., Yan, W., Ni, L., Wang, B., Liu, J., Yu, C., Pan, P., & Zheng, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02593 · Cited by 1
Self-citationZhu, Z., Xu, H., Zhu, L., Yin, S., & Yang, B. (2026) · Analytical Chemistry · doi:10.1021/acs.analchem.5c05843 · Cited by 1
Zhang, T., Zhang, X., Hua, X., Wu, H., & Zhang, J. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.112068 · Cited by 1
Zha, C., Liu, X., Zhang, C. P., Qiao, Z., & Bai, H. (2026) · Polymer · doi:10.1016/j.polymer.2026.130183 · Cited by 1
Ahmadi, H., Anderson, P. D., & Cardinaels, R. (2026) · Polymer · doi:10.1016/j.polymer.2026.130538 · Cited by 1
Crystallization behavior of stereoblock polylactide with high sequence regularity structure
Ye, W., Qi, X., Dongyang, L., Gao, S., Fan, Z., & Liu, Q. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5867 · Cited by 1
Guo, M., Wu, W., Wu, W., Wang, R., & Gao, Q. (2023) · New Journal of Chemistry · doi:10.1039/d2nj05098f · Cited by 1
Raef, M., Alayeto, I., Otaegi, I., Aranburu, N., Sarasua, J.-R., Etxeberria, A., & Ugartemendia, J. M. (2025) · Polymer Composites · doi:10.1002/pc.70055 · Cited by 1
“%) probably due to the higher thermodynamic stability of SCCs [59].”
Xu, R., Miao, X.-Y., Yang, S., Wang, S., Ma, Y., Müller, A., & Li, Z.-B. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03502 · Cited by 1
PLA stereo-block copolymer : from synthesis to the biomedical application
Moya‐López, C. (2022) · theses.fr (ABES) · doi:10.70675/6c6cf0b2z55b8z4ed6z8defzeff9f1967bac · Cited by 1
Improving interlayer adhesion of 3D printed PLA/PCL blends using triblock copolymers
Rachmani, O., Zaltsman, I., Otorgust, G., Mizrahi, L., Ophir, A., Kol, M., & Amir, E. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01643-6 · Cited by 1
“Unlike the physical mixture of PLLA and PDLA, whose crystalliza - tion tendency diminishes with increasing molecular weight, isotactic stereoblock copolymers retain the desired crystal - lization behavior because they contain covalently attached homochiral strands [ 43].”
Interfacial enhancement and stiffness–toughness balance in MDI-compatibilized PBAT/sc-PLA blends
Shi, L., He, L., Chen, N., Zhao, J., Zhang, Z., Wang, B., Pan, H., Bian, J., Wang, G., ZHAO, Y., et al. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.152430
Hua, X., Wu, H., Zhang, X., Duan, Y., Liu, L., Duan, Y., & Zhang, J. (2026) · Crystal Growth & Design · doi:10.1021/acs.cgd.6c00294
Liao, X., Wan, L., Shen, X., Gong, L., Guo, Y., Nie, Y., Wang, J., Li, Z., & Yan, C. (2026) · Polymer · doi:10.1016/j.polymer.2026.130303
Jin, Y. G., Wang, B., Cheng, H., Han, C., Li, Y., Qin, C., & Sun, Z. (2026) · Thermochimica Acta · doi:10.1016/j.tca.2026.180364
Preparation and Study on Gas Barrier Properties of PLLA/PVA- g -PDLA Blends
Wang, L., Fan, Z., Cao, J., Fan, X., Jiang, L., Dan, Y., & Huang, Y. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6c00316
Yu, P., Liu, X., Jin, Z., Hu, J., Zhao, Y., Xiong, S., Deng, W., & Huang, Y. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70939
Nifant'ev, I. E., & Ivchenko, P. V. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114863
Lin, H.-Y., Yao, C., & Lo, C. C. H. (2026) · Journal of Polymer Science · doi:10.1002/pola.70251
Li, Y.-Q., Ren, J., Chen, Z., Wang, F., Liang, J., Ma, G.-Z., Wang, Z., Zhong, G., & Li, Z. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c02746
Toughening of Poly(lactic acid): Strategies and Tradeoffs
Koh, J. J., Muiruri, J. K., Yeo, J. C. C., Hou, X., & He, C. (2026) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2026.102179
Pholharn, D., Dehghani, S., Veang-in, O., & Srithep, Y. (2026) · ACS Omega · doi:10.1021/acsomega.6c08171
D’Alterio, M. C., Lombardi, L., Cicolella, A., Ascione, A., Stornaiuolo, S., Maffettone, P. L., Rosa, C. D., & Girolamo, R. D. (2026) · Polymer · doi:10.1016/j.polymer.2026.130980
Metadata
- Authors
- Pan, P., Han, L., Bao, J., Xie, Q., Shan, G., & Bao, Y.
- Affiliations
- State Key Laboratory of Chemical Engineering (CN)
- Corresponding author
- Pan, Pengju
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-14
- Volume
- 119
- Issue
- 21
- Pages
- 6462-6470
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2342945516
- Cited by
- 231
- References
- 59
- Citations by year
- 2026: 22 · 2025: 19 · 2024: 21 · 2023: 25 · 2022: 27 · 2021: 18 · 2020: 14 · 2019: 15 · 2018: 15 · 2017: 22 · 2016: 22 · 2015: 11
- FWCI
- 14.96
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Physical Chemistry B (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education of the People's Republic of China (2015XZZX004-08)
- National Natural Science Foundation of China (21274128, 21422406)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Crystallization and Solubility Studies
- Keywords
- poly(L-lactic acid), poly(D-lactide), stereocomplexation, polymorphism, molecular weight effects, crystallization kinetics, chain diffusion, crystal nucleation, melting point, crystallinity, long period, isothermal crystallization
- MeSH terms
- Calorimetry, Differential Scanning, Crystallization, Kinetics, Molecular Weight, Polyesters, Polymers, Stereoisomerism, Lactic Acid, Macromolecular Substances
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.