Stereocomplex Crystallization and Homocrystallization of Star-Shaped Four-Armed Stereo Diblock Poly(lactide)s with Different l-Lactyl Unit Contents: Isothermal Crystallization from the Melt
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
The effects of l-lactyl unit content on star-shaped four-armed stereo diblock poly(lactide) (4-LD) polymers and star-shaped four-armed poly(l-lactide) (4-L) on the isothermal crystallization from the melt were investigated. Solely stereocomplex (SC) crystallites were formed in equimolar 4-LD polymer with l-lactyl unit content of about 50%, irrespective of crystallization temperature (Tc) values. 4-L and 4-LD polymers with l-lactyl unit contents of 100 and 93% formed only homocrystallites, regardless of Tc, whereas only SC crystallites with traceable amounts were formed in 4-LD polymers with l-lactyl unit contents of 72 and 31% at a limited narrow Tc range of 110-120 °C, when crystallization was continued for as long as 24 h. About 20% deviation of l-lactyl unit content from 50% dramatically decreased the spherulite growth rate (G) values of SC crystallites, whereas a 7% decrease of l-lactyl unit content from 100% significantly decreased the G values of homocrystallites and largely decreased the overall homocrystallization rates. Branching architecture rather than diblock architecture hindered the simultaneous formation of SC and homocrystallites of non-equimolar 4-LD polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Spassky, N., Wisniewski, M., Pluta, C., & Le Borgne, A. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970902 · Cited by 627
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Self-citationTsuji, H., & Tezuka, Y. (2004) · Biomacromolecules · doi:10.1021/bm049835i · Cited by 194
Self-citationSpinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
Physical Properties, Crystallization, and Spherulite Growth of Linear and 3-Arm Poly(l-lactide)s
Tsuji, H., Miyase, T., Tezuka, Y., & Saha, S. K. (2005) · Biomacromolecules · doi:10.1021/bm049552q · Cited by 148
Self-citationFukushima, K., & Kimura, Y. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22712 · Cited by 120
Cited by
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Han, L., Xie, Q., Bao, J., Shan, G., Bao, Y., & Pan, P. (2017) · Polymer Chemistry · doi:10.1039/c6py01989g · Cited by 64
Tsuji, H., Iguchi, K., & Arakawa, Y. (2021) · Polymer · doi:10.1016/j.polymer.2020.123226 · Cited by 24
Self-citation
Metadata
- Authors
- Tsuji, H., Matsumura, N., & Arakawa, Y.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-04
- Volume
- 120
- Issue
- 6
- Pages
- 1183-1193
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2301912057
- Cited by
- 49
- References
- 11
- FWCI
- 6.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.