The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Overcoming Short-Circuit in Lead-Free CH3NH3SnI3 Perovskite Solar Cells via Kinetically Controlled Gas–Solid Reaction Film Fabrication Process
Open accessAbstract
The development of Sn-based perovskite solar cells has been challenging because devices often show short-circuit behavior due to poor morphologies and undesired electrical properties of the thin films. A low-temperature vapor-assisted solution process (LT-VASP) has been employed as a novel kinetically controlled gas-solid reaction film fabrication method to prepare lead-free CH3NH3SnI3 thin films. We show that the solid SnI2 substrate temperature is the key parameter in achieving perovskite films with high surface coverage and excellent uniformity. The resulting high-quality CH3NH3SnI3 films allow the successful fabrication of solar cells with drastically improved reproducibility, reaching an efficiency of 1.86%. Furthermore, our Kelvin probe studies show the VASP films have a doping level lower than that of films prepared from the conventional one-step method, effectively lowering the film conductivity. Above all, with (LT)-VASP, the short-circuit behavior often obtained from the conventional one-step-fabricated Sn-based perovskite devices has been overcome. This study facilitates the path to more successful Sn-perovskite photovoltaic research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Optical Properties and Electronic Structure of Amorphous Germanium
Tauc, J., Grigorovici, R., & Vancu, A. (1966) · physica status solidi (b) · doi:10.1002/pssb.19660150224 · Cited by 11,071
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Self-citationLead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Self-citationLead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Self-citationRelativistic GW calculations on CH3NH3PbI3 and CH3NH3SnI3 Perovskites for Solar Cell Applications
Umari, P., Mosconi, E., & De Angelis, F. (2014) · Scientific Reports · doi:10.1038/srep04467 · Cited by 1,325
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Lead-free germanium iodide perovskite materials for photovoltaic applications
Krishnamoorthy, T., Ding, H., Yan, C., Leong, W. L., Baikie, T., Zhang, Z., Sherburne, M., Li, S., Asta, M., Mathews, N., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05741h · Cited by 1,164
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Synthesis, Structure, and Properties of Organic‐Inorganic Perovskites and Related Materials
Mitzi, D. B. (1999) · Progress in Inorganic Chemistry · doi:10.1002/9780470166499.ch1 · Cited by 805
Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06658 · Cited by 759
Self-citationUmari, P., Mosconi, E., & Angelis, F. D. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1309.4895 · Cited by 759
Lee, B., Stoumpos, C. C., Zhou, N., Hao, F., Malliakas, C., Yeh, C.-Y., Marks, T. J., Kanatzidis, M. G., & Chang, R. P. H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508464w · Cited by 721
Self-citationFormamidinium tin-based perovskite with low Eg for photovoltaic applications
Koh, T. M., Krishnamoorthy, T., Yantara, N., Shi, C., Leong, W. L., Boix, P. P., Grimsdale, A. C., Mhaisalkar, S. G., & Mathews, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00190k · Cited by 576
Perovskite solar cells: film formation and properties
Song, T.-B., Chen, Q., Zhou, H., Jiang, C., Wang, H.-H., (Michael) Yang, Y., Liu, Y., You, J., & Yang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05246c · Cited by 483
Self-citationCharge-transport in tin-iodide perovskite CH3NH3SnI3: origin of high conductivity
Takahashi, Y., Obara, R., Lin, Z.-Z., Takahashi, Y., Naito, T., Inabe, T., Ishibashi, S., & Terakura, K. (2011) · Dalton Transactions · doi:10.1039/c0dt01601b · Cited by 428
Sabba, D., Mulmudi, H. K., Prabhakar, R. R., Krishnamoorthy, T., Baikie, T., Boix, P. P., Mhaisalkar, S., & Mathews, N. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp5126624 · Cited by 421
High performance perovskite solar cells by hybrid chemical vapor deposition
Leyden, M. R., Ono, L. K., Raga, S. R., Kato, Y., Wang, S., & Qi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04385e · Cited by 350
Transport, Optical, and Magnetic Properties of the Conducting Halide Perovskite CH3NH3SnI3
Mitzi, D. B., Feild, C. A., Schlesinger, Z., & Laibowitz, R. B. (1995) · Journal of Solid State Chemistry · doi:10.1006/jssc.1995.1023 · Cited by 347
Binary‐Metal Perovskites Toward High‐Performance Planar‐Heterojunction Hybrid Solar Cells
Zuo, F., Williams, S. T., Liang, P., Chueh, C., Liao, C., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401641 · Cited by 335
Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?
Cao, D. H., Stoumpos, C. C., Malliakas, C. D., Katz, M. J., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2014) · APL Materials · doi:10.1063/1.4895038 · Cited by 297
Self-citationIm, J., Stoumpos, C. C., Jin, H., Freeman, A. J., & Kanatzidis, M. G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01738 · Cited by 255
Self-citationElectron Trapping in Porphyrin-Sensitized Porous Nanocrystalline TiO2 Electrodes
Boschloo, G. K., & Goossens, A. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp961553s · Cited by 158
Cupric bromide hybrid perovskite heterojunction solar cells
Cui, X., Jiang, K., Huang, J., Zhang, Q., Su, M.-J., Yang, L., Song, Y., & Zhou, X. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.07.013 · Cited by 122
Zuniga, C. A., Abdallah, J., Haske, W., Zhang, Y., Coropceanu, I., Barlow, S. H., Kippelen, B. J., & Marder, S. R. (2013) · Advanced Materials · doi:10.1002/adma.201204518 · Cited by 76
Cited by
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Self-citationRecent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Lyu, M., Yun, J., Chen, P., Hao, M., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602512 · Cited by 432
Metadata
- Authors
- Yokoyama, T., Cao, D. H., Stoumpos, C. C., Song, T.-B., Sato, Y., Aramaki, S., & Kanatzidis, M. G.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-17
- Volume
- 7
- Issue
- 5
- Pages
- 776-782
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2279053072
- Cited by
- 353
- References
- 36
- FWCI
- 21.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.