The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Toward a Stable Sodium Metal Anode in Carbonate Electrolyte: A Compact, Inorganic Alloy Interface
Abstract
Development of the next-generation, high-energy-density, low-cost batteries will likely be fueled by sodium (Na) metal batteries because of their high capacity and the abundance of Na. However, their practical application is significantly plagued by the hyper-reactivity of Na metal, unstable solid electrolyte interphase (SEI), and dendritic Na growth, leading to continuous electrolyte decomposition, low Coulombic efficiency, large impedance, and safety concerns. Herein, we add a small amount of SnCl 2 additive in a common carbonate electrolyte so that the spontaneous reaction between SnCl 2 and Na metal enables in situ formation of a Na–Sn alloy layer and a compact NaCl-rich SEI. Benefitting from this design, rapid interfacial ion transfer is realized and direct exposure of Na metal to the electrolyte is prohibited, which jointly achieve a nondendritic deposition morphology and a markedly reduced voltage hysteresis in a Na/Na symmetric cell for over 500 h. The Na/SnCl 2 -added electrolyte/Na 3 V 2 (PO 4 ) 3 full cell exhibits high capacity retention over cycling and excellent rate capability (101 mAh/g at 10 C). This work can provide an easily scalable and cost-effective approach for developing high-performance Na-metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Pokharel, J., Baniya, A., He, W., Wu, F., Zhou, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13774-2 · Cited by 455
Critical effects of electrolyte recipes for Li and Na metal batteries
Zheng, X., Huang, L., Ye, X., Zhang, J., Min, F., Luo, W., & Huang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.02.025 · Cited by 367
Self-citationDesign Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201903891 · Cited by 355
Metadata
- Authors
- Zheng, X., Fu, H., Hu, C., Xu, H., Huang, Y., Wen, J., Sun, H., Luo, W., & Huang, Y.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-29
- Volume
- 10
- Issue
- 4
- Pages
- 707-714
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2912273190
- Cited by
- 185
- References
- 1
- FWCI
- 8.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.