Fabrication of Few-Layered Porous Graphite for Removing Fluorosurfactant from Aqueous Solution
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Due to the persistence, toxicity, and widespread occurrence of fluorosurfactants in the blood of general population, it is very important to develop recyclable and highly effective adsorbent material for their removal from aqueous solution. Herein, a new type of few-layered porous graphite (FPG) was fabricated as an adsorbent, and the adsorption characteristics of FPG toward potassium perfluorobutane sulfonate (PFBS), potassium perfluorohexane sulfonate (PFHxS), and potassium perfluorooctane sulfonate (PFOS) in environmental cleanup were evaluated under laboratory condition. The results indicated that the as-prepared FPG had sorption capacities of 1.22, 1.52, and 2.48 mmol g –1 for PFBS, PFHxS, and PFOS, respectively, which were the highest adsorption values of PFHxS, PFBS, and PFOS on different kinds of today’s carbon materials. The efficiency of FPG remained almost constant during the first five cycles of the adsorption–desorption process after heating. The outstanding adsorption performance of FPG was attributed to its unique physical properties, such as high porosity, high hydrophobicity, low density, and excellent heat stability. The findings presented herein indicated that FPG could serve as a promising adsorbent for the removal of fluorosurfactant in waste water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calafat, A. M., Wong, L.-Y., Kuklenyik, Z., Reidy, J. A., & Needham, L. L. (2007) · Environmental Health Perspectives · doi:10.1289/ehp.10598 · Cited by 1,247
Trojanowicz, M., Bojanowska-Czajka, A., Bartosiewicz, I., & Kulisa, K. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.153 · Cited by 550
The Adsorption of Perfluorooctane Sulfonate onto Sand, Clay, and Iron Oxide Surfaces
Johnson, R. L., Anschutz, A. J., Smolen, J. M., Simcik, M. F., & Penn, R. L. (2007) · Journal of Chemical & Engineering Data · doi:10.1021/je060285g · Cited by 389
The Madrid Statement on Poly- and Perfluoroalkyl Substances (PFASs)
Blum, A., Balan, S. A., Scheringer, M., Trier, X., Goldenman, G., Cousins, I. T., Diamond, M., Fletcher, T., Higgins, C., Lindeman, A. E., et al. (2015) · Environmental Health Perspectives · doi:10.1289/ehp.1509934 · Cited by 285
Guelfo, J. L., & Adamson, D. T. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.01.066 · Cited by 216
Sorption of perfluorinated compounds from contaminated water to activated carbon
Hansen, M. C., Børresen, M. H., Schlabach, M., & Cornelissen, G. (2010) · Journal of Soils and Sediments · doi:10.1007/s11368-009-0172-z · Cited by 175
Wang, Z., Cousins, I. T., Berger, U., Hungerbühler, K., & Scheringer, M. (2016) · Environment International · doi:10.1016/j.envint.2016.01.023 · Cited by 96
Cited by
Adsorption of perfluoroalkyl and polyfluoroalkyl substances (PFASs) from aqueous solution: A review
Zhang, D. Q., Zhang, W. L., & Liang, Y. N. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.133606 · Cited by 463
Abunada, Z., Alazaiza, M. Y. D., & Bashir, M. J. K. (2020) · Water · doi:10.3390/w12123590 · Cited by 397
Comparison of currently available PFAS remediation technologies in water: a review
Wanninayake, D. M. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.111977 · Cited by 332
Yu, H., Chen, H., Fang, B., & Sun, H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.160647 · Cited by 85
Metadata
- Authors
- Wu, T., Wu, Z., Ma, D., Xiang, W., Zhang, J., Liu, H., Deng, Y., Tan, S., & Cai, X.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-11-06
- Volume
- 34
- Issue
- 50
- Pages
- 15181-15188
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2900134753
- Cited by
- 26
- References
- 7
- FWCI
- 0.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.