Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide)
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
It will be shown that when polyether- b -amide (PEBA) is added to a PLA/PA11 blend, it tends toward the interface and results in a significant increase in the impact strength when all three phases are fully percolated. The addition of the elastomeric PEBA phase to the binary PLA/PA11 blend replaces a rigid PLA/PA11 interface with a much more deformable one. The further addition of PEO to PLA results in an ultratough material with an impact strength of ∼750 J/m, which is approximately 40 times greater than the original co-continuous PLA/PA11 blend. The tensile toughness and notched Izod impact strength are significantly influenced by the critical co-continuous composition region of the PLA/PA11 binary system and a minimum concentration to form a fully percolated PEBA layer at the co-continuous PLA/PA11 interface. The added PEO is also found to enhance the interfacial interactions and the chain mobility of PLA. The combined effects of co-continuity, strong interfacial interactions, a deformable interface, and sufficient PLA chain mobility are all essential to achieving ultratough behavior in PLA/PA11. Examination of the fracture surface of the ultratough material after impact indicates significant voiding. It is suggested that the stress-field overlap within the deformable PEBA phase in conjunction with suitable interfacial adhesion changes the failure mode from crazing to shear yielding. These results establish a strategy for the toughening of multiphase polymer blends, especially in the vicinity of the co-continuous region.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Zolali, A. M., & Favis, B. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00464 · Cited by 100
Self-citationGarcía-Campo, M., Boronat, T., Quiles-Carrillo, L., Balart, R., & Montanes, N. (2017) · Polymers · doi:10.3390/polym10010003 · Cited by 49
Nam, B., & Son, Y. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49011 · Cited by 24
Metadata
- Authors
- Zolali, A. M., Heshmati, V., & Favis, B. D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-27
- Volume
- 50
- Issue
- 1
- Pages
- 264-274
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2567368548
- Cited by
- 117
- References
- 4
- FWCI
- 8.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide). https://app.cochat.ai/papers/10.1021/acs.macromol.6b02310
- The paper
- Zolali, A. M., Heshmati, V., & Favis, B. D. (2017). Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide). Macromolecules. https://doi.org/10.1021/acs.macromol.6b02310
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.