The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Vanillin-Derived High-Performance Flame Retardant Epoxy Resins: Facile Synthesis and Properties
Abstract
Lignin derivative vanillin when coupled with diamines and diethyl phosphite followed by reaction with echichlorohydrin yields high-performance flame retardant epoxy resins. Biorenewable and environment-friendly flame retardant alternatives to bisphenol A epoxy resins (having plenty of applications such as coatings, adhesives, composites, etc.) have captured great attention due to their ecological and economic necessity. Vanillin, an industrial scale monoaromatic compound from lignin, is a promising sustainable candidate for high-performance polymers, while synthesis of diepoxies is challenging. Meanwhile, bio-based epoxy resins combining high performance and excellent fire resistance are more difficult to be achieved. In this paper, two novel bio-based epoxy monomers EP1 and EP2 were synthesized by one-pot reaction containing Schiff base formation and phosphorus–hydrogen addition between vanillin, diamines, and diethyl phosphite, followed by reacting with epichlorohydrin. Their reactivities are similar to bisphenol A epoxy resin DGEBA. After curing they showed excellent flame retardancy with UL-94 V0 rating and high LOI of ∼32.8%, which was due to the outstanding intumescent and dense char formation ability. Meanwhile, it was found that the cured vanillin-based epoxies had exceedingly high T g s of ∼214 °C, tensile strength of ∼80.3 MPa, and tensile modulus of ∼2709 MPa, much higher than the cured DGEBA with T g of 166 °C, tensile strength of 76.4 MPa, and tensile modulus of 1893 MPa; the properties of vanillin-based epoxies are easy to be regulated by using different “coupling” agents—diamines—during the synthesis process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Valorization of Biomass: Deriving More Value from Waste
Tuck, C. O., Pérez, E., Horváth, I. T., Sheldon, R. A., & Poliakoff, M. (2012) · Science · doi:10.1126/science.1218930 · Cited by 2,165
Strategies for the Conversion of Lignin to High-Value Polymeric Materials: Review and Perspective
Upton, B. M., & Kasko, A. M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00345 · Cited by 1,519
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Thermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Bisphenol A exposure, effects, and policy: A wildlife perspective
Flint, S., Markle, T., Thompson, S., & Wallace, E. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.03.021 · Cited by 884
Song, S. H., Park, K. H., Kim, B. H., Choi, Y. W., Jun, G. H., Lee, D. J., Kong, B., Paik, K., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201202736 · Cited by 667
Facile tailoring of thermal transition temperatures of epoxy shape memory polymers
Xie, T., & Rousseau, I. A. (2009) · Polymer · doi:10.1016/j.polymer.2009.02.035 · Cited by 535
Vanillin, a promising biobased building-block for monomer synthesis
Fache, M., Darroman, E., Besse, V., Auvergne, R., Caillol, S., & Boutevin, B. (2014) · Green Chem. · doi:10.1039/c3gc42613k · Cited by 499
Control of reactions and network structures of epoxy thermosets
Vidil, T., Tournilhac, F., Musso, S., Robisson, A., & Leibler, L. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.06.003 · Cited by 434
Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers
Ma, S., Liu, X., Jiang, Y., Tang, Z., Zhang, C., & Zhu, J. (2013) · Green Chem. · doi:10.1039/c2gc36715g · Cited by 346
Self-citation
Cited by
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191
Toughness and its mechanisms in epoxy resins
Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100977 · Cited by 683
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Wang, S., Ma, S., Li, Q., Xu, X., Wang, B., Yuan, W., Zhou, S., You, S., & Zhu, J. (2019) · Green Chemistry · doi:10.1039/c8gc03477j · Cited by 503
Self-citationLignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials
Yang, H., Yu, B., Xu, X., Bourbigot, S., Wang, H., & Song, P. (2020) · Green Chemistry · doi:10.1039/d0gc00449a · Cited by 461
Future opportunities for bio-based adhesives – advantages beyond renewability
Heinrich, L. A. (2019) · Green Chemistry · doi:10.1039/c8gc03746a · Cited by 405
Robust, Fire-Safe, Monomer-Recovery, Highly Malleable Thermosets from Renewable Bioresources
Wang, S., Ma, S., Li, Q., Yuan, W., Wang, B., & Zhu, J. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01601 · Cited by 386
Self-citationMohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Zhi, M., Yang, X., Fan, R., Yue, S., Zheng, L., Liu, Q., & He, Y. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109976 · Cited by 314
Grafting strategies for hydroxy groups of lignin for producing materials
Eraghi Kazzaz, A., Hosseinpour Feizi, Z., & Fatehi, P. (2019) · Green Chemistry · doi:10.1039/c9gc02598g · Cited by 294
Xu, X., Ma, S., Wu, J., Yang, J., Wang, B., Wang, S., Li, Q., Feng, J., You, S., & Zhu, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05293c · Cited by 285
Self-citationSustainable Epoxy Vitrimers from Epoxidized Soybean Oil and Vanillin
Zhao, X.-L., Liu, Y.-Y., Weng, Y., Li, Y.-D., & Zeng, J.-B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05727 · Cited by 277
Self-citationXiong, Z., Zhang, Y., Du, X., Song, P., & Fang, Z. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01016 · Cited by 267
Metadata
- Authors
- Wang, S., Ma, S., Xu, C., Liu, Y., Dai, J., Wang, Z., Liu, X., Chen, J., Shen, X., Wei, J., & Zhu, J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-24
- Volume
- 50
- Issue
- 5
- Pages
- 1892-1901
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2589743940
- Cited by
- 491
- References
- 26
- FWCI
- 23.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.