CoChat

How the Complex Interplay between Different Blocks Determines the Isothermal Crystallization Kinetics of Triple-Crystalline PEO- b -PCL- b -PLLA Triblock Terpolymers

The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.

Abstract

PEO - b - PCL - b - PLLA triblock terpolymers are fascinating triple-crystalline materials. In this work, the isothermal crystallization kinetics of these terpolymers evaluated by differential scanning calorimetry (DSC) is presented for the first time and compared to analogous PCL - b - PLLA diblock copolymers and to PLLA, PCL, and PEO homopolymers. The results are complemented by in situ SAXS/WAXS synchrotron experiments. One-, two-, and three-step crystallization protocols were employed to study the crystallization kinetics of the blocks. At PLLA block crystallization temperatures, both PCL and PEO molten chains caused a strong plasticizing effect on the PLLA block crystallization, and the overall crystallization rate of the PLLA block in the terpolymers was higher than that in the PLLA - b - PCL diblock copolymers. In the case of the PCL block, the crystallization was followed after PLLA was fully crystallized (two-step crystallization). A nucleating effect induced by the previously formed PLLA crystals was observed. However, an antiplasticizing effect on PCL crystallization was detected if the sample is quenched directly from the melt to the PCL crystallization temperature (one-step crystallization). Finally, the crystallization of the PEO block was followed after PLLA and PCL had fully crystallized (three-step crystallization). The PEO crystallization rate highly decreased due to the confinement imposed by the previously formed PLLA and PCL crystals. Complex competitive effects such as plasticization, nucleation, antiplasticization, and confinement occurred during the isothermal crystallization of tricrystalline PEO - b - PCL - b - PLLA triblock terpolymers.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.macromol.7b02148

Cites

66 of 66 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 66 references

Research works printed but not linked: 6

  1. Müller, A. J.; Arnal, M. L.; Lorenzo, A. T.InHandbook of Polymer Crystallization;Piorkowska, E.; Rutledge, G. C., Eds.John Wiley and Sons:Hoboken, NJ, 2013; p347.
  2. Li, S.; Register, R. A.InHandbook of Polymer Crystallization;Piorkowska, E.; Rutledge, G. C., Eds.John Wiley and Sons:Hoboken, NJ, 2013; p327.
  3. 10.1002/(SICI)1097-4628(19990418)72:3<341::AID-APP4>3.0.CO;2-D · DOI
  4. Müller A. J., 2015, Poly(Lactic Acid) Science and Technology: Processing, Properties, Additives and Applications
  5. Gedde U. W., 1995, Polymer Physics
  6. Kolmogorov A. N., 1937, Izv. Akad. Nauk SSSR Ser. Mater., 1, 355

Cited by

See all 41

Metadata

Authors
Palacios, J. K., Zhao, J., Hadjichristidis, N., & Müller, A. J.
Affiliations
  • University of the Basque Country (ES)
  • King Abdullah University of Science and Technology (SA)
  • Ikerbasque (ES)
Corresponding author
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Venue
Macromolecules
Published
2017-12-05
Volume
50
Issue
24
Pages
9683-9695
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2772040221
Cited by
41
References
65
Citations by year
2026: 3 · 2025: 3 · 2024: 1 · 2023: 5 · 2022: 5 · 2021: 4 · 2020: 9 · 2019: 8 · 2018: 3
FWCI
3.13
Type
journal article
Language
en
Open access
closed
Locations
  • Macromolecules (publishedVersion)
  • King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion)
Funders
  • Ministerio de Econom?a y Competitividad (Mineco MAT2014-53437-C2-P)
  • ALBA Synchrotron Source (2016091863 (2017))
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
triblock terpolymers, isothermal crystallization kinetics, block copolymers, plasticization, antiplasticization, nucleation, confinement effects, poly(L-lactic acid), PCL, PEO, diblock copolymers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.