The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Young’s Modulus and Tensile Strength of Ti3C2 MXene Nanosheets As Revealed by In Situ TEM Probing, AFM Nanomechanical Mapping, and Theoretical Calculations
Abstract
Two-dimensional transition metal carbides, that is, MXenes and especially Ti 3 C 2, attract attention due to their excellent combination of properties. Ti 3 C 2 nanosheets could be the material of choice for future flexible electronics, energy storage, and electromechanical nanodevices. There has been limited information available on the mechanical properties of Ti 3 C 2, which is essential for their utilization. We have fabricated Ti 3 C 2 nanosheets and studied their mechanical properties using direct in situ tensile tests inside a transmission electron microscope, quantitative nanomechanical mapping, and theoretical calculations employing machine-learning derived potentials. Young’s modulus in the direction perpendicular to the Ti 3 C 2 basal plane was found to be 80–100 GPa. The tensile strength of Ti 3 C 2 nanosheets reached up to 670 MPa for ∼40 nm thin nanoflakes, while a strong dependence of tensile strength on nanosheet thickness was demonstrated. Theoretical calculations allowed us to study mechanical characteristics of Ti 3 C 2 as a function of nanosheet geometrical parameters and structural defect concentration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Cited by
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Wang, Y., Guo, T., Tian, Z., Bibi, K., Zhang, Y., & Alshareef, H. N. (2022) · Advanced Materials · doi:10.1002/adma.202108560 · Cited by 315
Metadata
- Authors
- Firestein, K. L., von Treifeldt, J. E., Kvashnin, D. G., Fernando, J. F. S., Zhang, C., Kvashnin, A. G., Podryabinkin, E. V., Shapeev, A. V., Siriwardena, D. P., Sorokin, P. B., & Golberg, D.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-07-07
- Volume
- 20
- Issue
- 8
- Pages
- 5900-5908
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W3041500249
- Cited by
- 220
- References
- 3
- FWCI
- 7.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Young’s Modulus and Tensile Strength of Ti3C2 MXene Nanosheets As Revealed by In Situ TEM Probing, AFM Nanomechanical Mapping, and Theoretical Calculations. https://app.cochat.ai/papers/10.1021/acs.nanolett.0c01861
- The paper
- Firestein, K. L., von Treifeldt, J. E., Kvashnin, D. G., Fernando, J. F. S., Zhang, C., Kvashnin, A. G., Podryabinkin, E. V., Shapeev, A. V., Siriwardena, D. P., Sorokin, P. B., & Golberg, D. (2020). Young’s Modulus and Tensile Strength of Ti3C2 MXene Nanosheets As Revealed by In Situ TEM Probing, AFM Nanomechanical Mapping, and Theoretical Calculations. Nano Letters. https://doi.org/10.1021/acs.nanolett.0c01861
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.