The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Abstract
Although inorganic hole-transport materials usually possess high chemical stability, hole mobility, and low cost, the efficiency of most of inorganic hole conductor-based perovskite solar cells is still much lower than that of the traditional organic hole conductor-based cells. Here, we have successfully fabricated high quality CH3NH3PbI3 films on top of a CuSCN layer by utilizing a one-step fast deposition-crystallization method, which have lower surface roughness and smaller interface contact resistance between the perovskite layer and the selective contacts in comparison with the films prepared by a conventional two-step sequential deposition process. The average efficiency of the CuSCN-based inverted planar CH3NH3PbI3 solar cells has been improved to 15.6% with a highest PCE of 16.6%, which is comparable to that of the traditional organic hole conductor-based cells, and may promote wider application of the inexpensive inorganic materials in perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Cited by
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Hole‐Transport Materials for Perovskite Solar Cells
Calió, L., Kazim, S., Grätzel, M., & Ahmad, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201601757 · Cited by 1,004
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Advances in Perovskite Solar Cells
Zuo, C., Bolink, H. J., Han, H., Huang, J., Cahen, D., & Ding, L. (2016) · Advanced Science · doi:10.1002/advs.201500324 · Cited by 654
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Wu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
Wang, S., Sakurai, T., Wen, W., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800260 · Cited by 350
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Efficiency progress of inverted perovskite solar cells
Lin, X., Cui, D., Luo, X., Zhang, C., Han, Q., Wang, Y., & Han, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02017f · Cited by 346
A brief review of hole transporting materials commonly used in perovskite solar cells
Li, S., Cao, Y., Li, W., & Bo, Z. (2021) · Rare Metals · doi:10.1007/s12598-020-01691-z · Cited by 346
Sun, C., Wu, Z., Yip, H., Zhang, H., Jiang, X., Xue, Q., Hu, Z., Hu, Z., Shen, Y., Wang, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501534 · Cited by 331
Chatterjee, S., & Pal, A. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11540 · Cited by 327
Decomposition of Organometal Halide Perovskite Films on Zinc Oxide Nanoparticles
Cheng, Y., Yang, Q.-D., Xiao, J., Xue, Q., Li, H.-W., Guan, Z., Yip, H.-L., & Tsang, S.-W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04695 · Cited by 325
Liu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703432 · Cited by 324
Self-citationFundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Song, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Sepalage, G. A., Meyer, S., Pascoe, A., Scully, A. D., Huang, F., Bach, U., Cheng, Y., & Spiccia, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502541 · Cited by 290
Self‐Repairing Tin‐Based Perovskite Solar Cells with a Breakthrough Efficiency Over 11%
Wang, C., Gu, F., Zhao, Z., Rao, H., Qiu, Y., Cai, Z., Zhan, G., Li, X., Sun, B., Yu, X., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907623 · Cited by 287
Self-citationHole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Self-citationLarge-area perovskite solar cells – a review of recent progress and issues
Chen, Y., Zhang, L., Zhang, Y., Gao, H., & Yan, H. (2018) · RSC Advances · doi:10.1039/c8ra00384j · Cited by 269
Rao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261
Self-citationWijeyasinghe, N., Regoutz, A., Eisner, F., Du, T., Tsetseris, L., Lin, Y., Faber, H., Pattanasattayavong, P., Li, J., Yan, F., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701818 · Cited by 261
Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab
Celik, I., Song, Z., Cimaroli, A. J., Yan, Y., Heben, M. J., & Apul, D. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.037 · Cited by 260
A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells
Ava, T. T., Al Mamun, A., Marsillac, S., & Namkoong, G. (2019) · Applied Sciences · doi:10.3390/app9010188 · Cited by 260
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Chen, T.-W., Ramachandran, R., Chen, S.-M., Kavitha, N., Dinakaran, K., Kannan, R., Anushya, G., Bhuvana, N., Jeyapragasam, T., Mariyappan, V., et al. (2020) · Catalysts · doi:10.3390/catal10080938 · Cited by 49
“The hole-conduct-free, compact layer-free and cost effective organic–inorganic-based PSCs are successfully employed for next generation high efficiency photovoltaic energy devices [46,47].”
Method
Metadata
- Authors
- Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-06
- Volume
- 15
- Issue
- 6
- Pages
- 3723-3728
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2396736005
- Cited by
- 564
- References
- 31
- FWCI
- 40.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.