The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
High-Efficiency and Air-Stable Perovskite Quantum Dots Light-Emitting Diodes with an All-Inorganic Heterostructure
Abstract
Perovskite light-emitting diodes (PeLEDs), because of its fundamental scientific importance and practical applications in the fields of low-cost light source or display applications, have drawn worldwide attention in recent years. However, PeLEDs available today suffer from a compromise in their emission efficiency and operation stability. In this study, we designed and fabricated a stacking all-inorganic multilayer structure by using inorganic perovskite CsPbBr 3 quantum dots (QDs) as the emissive layer and inorganic n-type MgZnO and p-type MgNiO as the carrier injectors, respectively. Through energy band engineering of carrier injectors by Mg incorporation and their thickness optimization, PeLEDs with maximum luminance of 3809 cd/m 2, luminous efficiency of 2.25 cd/A, and external quantum efficiency of 2.39% have been realized, which are much better than most PeLEDs from CH 3 NH 3 PbBr 3 films, and comparable with the highest results reported on CsPbBr 3 QDs LEDs. More importantly, the unencapsulated PeLEDs in a continuous current mode demonstrate a remarkable operation stability against water and oxygen degradation. After a continuous operation for 10 h under a dc bias (10.0 V), nearly 80% of the original efficiency of the PeLEDs has been retained, greatly superior to reference and other previously reported devices constructed with conventional organic carrier injectors. Our results obtained open possibilities for the design and development of high-efficiency and air-stable PeLEDs that are not dependent on expensive and less-stable organic carrier injectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Self-citationLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Li, X., Wu, Y., Zhang, S., Cai, B., Gu, Y., Song, J., & Zeng, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600109 · Cited by 2,545
Self-citationZhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Yakunin, S., Protesescu, L., Krieg, F., Bodnarchuk, M. I., Nedelcu, G., Humer, M., De Luca, G., Fiebig, M., Heiss, W., & Kovalenko, M. V. (2015) · Nature Communications · doi:10.1038/ncomms9056 · Cited by 1,633
Stoumpos, C. C., Malliakas, C. D., Peters, J. A., Liu, Z., Sebastian, M., Im, J., Chasapis, T. C., Wibowo, A. C., Chung, D. Y., Freeman, A. J., et al. (2013) · Crystal Growth & Design · doi:10.1021/cg400645t · Cited by 1,596
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Excitation-power dependence of the near-band-edge photoluminescence of semiconductors
Schmidt, T., Lischka, K., & Zulehner, W. (1992) · Physical Review B · doi:10.1103/physrevb.45.8989 · Cited by 1,116
Li, G., Rivarola, F. W. R., Davis, N. J. L. K., Bai, S., Jellicoe, T. C., de la Peña, F., Hou, S., Ducati, C., Gao, F., Friend, R. H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600064 · Cited by 901
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Zhang, X., Lin, H., Huang, H., Reckmeier, C., Zhang, Y., Choy, W. C. H., & Rogach, A. L. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04959 · Cited by 731
Self-citationInterfacial Control Toward Efficient and Low‐Voltage Perovskite Light‐Emitting Diodes
Wang, J., Wang, N., Jin, Y., Si, J., Tan, Z., Du, H., Cheng, L., Dai, X., Bai, S., He, H., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405217 · Cited by 723
Temperature-dependent exciton linewidths in semiconductors
Rudin, S., Reinecke, T. L., & Segall, B. (1990) · Physical review. B, Condensed matter · doi:10.1103/physrevb.42.11218 · Cited by 697
Savenije, T. J., Ponseca, C. S., Kunneman, L., Abdellah, M., Zheng, K., Tian, Y., Zhu, Q., Canton, S. E., Scheblykin, I. G., Pullerits, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500858a · Cited by 558
Inorganic Halide Perovskites for Efficient Light-Emitting Diodes
Yantara, N., Bhaumik, S., Yan, F., Sabba, D., Dewi, H. A., Mathews, N., Boix, P. P., Demir, H. V., & Mhaisalkar, S. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02011 · Cited by 552
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Surface-Related Emission in Highly Luminescent CdSe Quantum Dots
Wang, X., Qu, L., Zhang, J., Peng, X., & Xiao, M. (2003) · Nano Letters · doi:10.1021/nl0342491 · Cited by 518
Bright Light‐Emitting Diodes Based on Organometal Halide Perovskite Nanoplatelets
Ling, Y., Yuan, Z., Tian, Y., Wang, X., Wang, J. C., Xin, Y., Hanson, K., Ma, B., & Gao, H. (2016) · Advanced Materials · doi:10.1002/adma.201503954 · Cited by 513
Zhang, X., Xu, B., Zhang, J., Gao, Y., Zheng, Y., Wang, K., & Sun, X. W. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600958 · Cited by 493
Air‐Stable Polymer Electronic Devices
Lee, K., Kim, J. Y., Park, S. H., Kim, S. H., Cho, S., & Heeger, A. J. (2007) · Advanced Materials · doi:10.1002/adma.200602653 · Cited by 403
High-Efficiency Light-Emitting Diodes of Organometal Halide Perovskite Amorphous Nanoparticles
Xing, J., Yan, F., Zhao, Y., Chen, S., Yu, H., Zhang, Q., Zeng, R., Demir, H. V., Sun, X., Huan, A., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b01540 · Cited by 401
Growth and Anion Exchange Conversion of CH3NH3PbX3 Nanorod Arrays for Light-Emitting Diodes
Wong, A. B., Lai, M., Eaton, S. W., Yu, Y., Lin, E., Dou, L., Fu, A., & Yang, P. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02082 · Cited by 384
Band Gap Tuning of CH3NH3Pb(Br1–xClx)3 Hybrid Perovskite for Blue Electroluminescence
Kumawat, N. K., Dey, A., Kumar, A., Gopinathan, S. P., Narasimhan, K. L., & Kabra, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02159 · Cited by 379
Hoye, R. L. Z., Chua, M. R., Musselman, K. P., Li, G., Lai, M., Tan, Z., Greenham, N. C., MacManus‐Driscoll, J. L., Friend, R. H., & Credgington, D. (2015) · Advanced Materials · doi:10.1002/adma.201405044 · Cited by 309
Sequential Deposition of CH3NH3PbI3 on Planar NiO Film for Efficient Planar Perovskite Solar Cells
Hu, L., Peng, J., Wang, W., Xia, Z., Yuan, J., Lu, J., Huang, X., Ma, W., Song, H., Chen, W., et al. (2014) · ACS Photonics · doi:10.1021/ph5000067 · Cited by 259
Jaramillo-Quintero, O. A., Sanchez, R. S., Rincon, M., & Mora-Sero, I. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00732 · Cited by 251
CH3NH3PbI3-Based Planar Solar Cells with Magnetron-Sputtered Nickel Oxide
Cui, J., Meng, F., Zhang, H., Cao, K., Yuan, H., Cheng, Y., Huang, F., & Wang, M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am507108u · Cited by 231
Kwon, U., Kim, B.-G., Nguyen, D. C., Park, J.-H., Ha, N. Y., Kim, S.-J., Ko, S. H., Lee, S., Lee, D., & Park, H. J. (2016) · Scientific Reports · doi:10.1038/srep30759 · Cited by 219
Priante, D., Dursun, İ., Alias, M. S., Shi, D., Melnikov, V. A., Ng, T. K., Mohammed, O. F., Bakr, O. M., & Ooi, B. S. (2015) · Applied Physics Letters · doi:10.1063/1.4913463 · Cited by 142
Dai, J., Zheng, H., Zhu, C., Lu, J., & Xu, C. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00563b · Cited by 124
Yu, J. C., Kim, D. W., Kim, D. B., Jung, E. D., Park, J. H., Lee, A., Lee, B. R., Nuzzo, D. D., Friend, R. H., & Song, M. H. (2016) · Advanced Materials · doi:10.1002/adma.201601105 · Cited by 122
Huang, H., Lin, H., Kershaw, S. V., Susha, A. S., Choy, W. C. H., & Rogach, A. L. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02224 · Cited by 110
Shi, Z., Sun, X., Wu, D., Xu, T., Zhuang, S., Tian, Y., Li, X., & Du, G. (2016) · Nanoscale · doi:10.1039/c6nr00818f · Cited by 100
Self-citationHigh-Temperature Photoluminescence of CdSe/CdS Core/Shell Nanoheterostructures
Diroll, B. T., & Murray, C. B. (2014) · ACS Nano · doi:10.1021/nn5021314 · Cited by 90
New Hybrid Hole Extraction Layer of Perovskite Solar Cells with a Planar p–i–n Geometry
Park, I. J., Park, M. A., Kim, D. H., Park, G. D., Kim, B. J., Son, H. J., Ko, M. J., Lee, D., Park, T., Shin, H., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09322 · Cited by 75
Electroluminescence from Organometallic Lead Halide Perovskite‐Conjugated Polymer Diodes
Sadhanala, A., Kumar, A., Pathak, S. K., Rao, A., Steiner, U., Greenham, N. C., Snaith, H. J., & Friend, R. H. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500008 · Cited by 68
Excitation-Power Dependence of Free Exciton Photoluminescence of Semiconductors
Shibata, H., Sakai, M., Yamada, A., Matsubara, K., Sakurai, K., Tampo, H., Ishizuka, S., Kim, K., & Niki, S. (2005) · Japanese Journal of Applied Physics · doi:10.1143/jjap.44.6113 · Cited by 66
Johnston, M. B. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.180 · Cited by 45
Cited by
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Pan, J., Shang, Y., Yin, J., De Bastiani, M., Peng, W., Dursun, I., Sinatra, L., El-Zohry, A. M., Hedhili, M. N., Emwas, A.-H., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10647 · Cited by 929
Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment
Koscher, B. A., Swabeck, J. K., Bronstein, N. D., & Alivisatos, A. P. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02817 · Cited by 844
Nenon, D. P., Pressler, K., Kang, J., Koscher, B. A., Olshansky, J. H., Osowiecki, W. T., Koc, M. A., Wang, L.-W., & Alivisatos, A. P. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11035 · Cited by 631
Zhang, J., Yang, Y., Deng, H., Farooq, U., Yang, X., Khan, J., Tang, J., & Song, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b04683 · Cited by 581
Metadata
- Authors
- Shi, Z., Li, Y., Zhang, Y., Chen, Y., Li, X., Wu, D., Xu, T., Shan, C., & Du, G.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-14
- Volume
- 17
- Issue
- 1
- Pages
- 313-321
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2562548885
- Cited by
- 445
- References
- 47
- FWCI
- 28.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.