The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Three-Dimensional High-Entropy Alloy–Polymer Composite Nanolattices That Overcome the Strength–Recoverability Trade-off
Abstract
Mechanical metamaterials with three-dimensional micro- and nanoarchitectures exhibit unique mechanical properties, such as high specific modulus, specific strength, and energy absorption. However, a conflict exists between strength and recoverability in nearly all the mechanical metamaterials reported recently, in particular the architected micro/nanolattices, which restricts the applications of these materials in energy storage/absorption and mechanical actuation. Here, we demonstrated the fabrication of three-dimensional architected composite nanolattices that overcome the strength–recoverability trade-off. The nanolattices under study are made up of a high-entropy alloy-coated (14.2–126.1 nm in thickness) polymer strut (approximately 260 nm in the characteristic size) fabricated via two-photon lithography and magnetron sputtering deposition. In situ uniaxial compression inside a scanning electron microscope showed that these composite nanolattices exhibit a high specific strength of 0.027 MPa/kg m 3, an ultrahigh energy absorption per unit volume of 4.0 MJ/m 3, and nearly complete recovery after compression under strains exceeding 50%, thus overcoming the traditional strength–recoverability trade-off. During multiple compression cycles, the composite nanolattices exhibit a high energy loss coefficient (converged value after multiple cycles) of 0.5–0.6 at a compressive strain beyond 50%, surpassing the coefficients of all the micro/nanolattices fabricated recently. Our experiments also revealed that, for a given unit cell size, the composite nanolattices coated with a high entropy alloy with thickness in the range of 14–50 nm have the optimal specific modulus, specific strength, and energy absorption per unit volume, which is related to a transition of the dominant deformation mechanism from local buckling to brittle fracture of the struts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Self-citation3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
Metadata
- Authors
- Zhang, X., Yao, J., Liu, B., Yan, J., Lu, L., Li, Y., Gao, H., & Li, X.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-14
- Volume
- 18
- Issue
- 7
- Pages
- 4247-4256
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2808306567
- Cited by
- 179
- References
- 3
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three-Dimensional High-Entropy Alloy–Polymer Composite Nanolattices That Overcome the Strength–Recoverability Trade-off. https://app.cochat.ai/papers/10.1021/acs.nanolett.8b01241
- The paper
- Zhang, X., Yao, J., Liu, B., Yan, J., Lu, L., Li, Y., Gao, H., & Li, X. (2018). Three-Dimensional High-Entropy Alloy–Polymer Composite Nanolattices That Overcome the Strength–Recoverability Trade-off. Nano Letters. https://doi.org/10.1021/acs.nanolett.8b01241
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.