The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Moisture-Driven Power Generation for Multifunctional Flexible Sensing Systems
Abstract
Flexible self-powered multifunctional sensing systems provide a promising direction for the development of wearable electronics. Although increased efforts have been devoted to developing self-powered integrated devices, the development of flexible and adaptable sensing systems with miniaturized stable power supplies is highly desirable yet greatly challenging. Herein, an ambient moisture-induced self-powered wearable sensing system was fabricated by integrating a porous polydopamine layer with a hydroxy group gradient (called g-PDA) based moisture-enabled power generator and a flexible pressure sensor. Due to the large amount of gradient-distributed free cations (H + ) and locally confined anions produced in wide electrode spaces during hydration of the thin porous g-PDA film, the moisture-induced potential and effective output power density of the g-PDA-based power generator rapidly reaches up to 0.52 V and 0.246 mW cm –2, respectively. Importantly, the voltage output within 120 s only has 6% change, and a continuously open-circuit voltage can be maintained after 1900 s of attenuation, which is a breakthrough for the duration of humidity generation. Finally, a self-powered wearable multifunctional sensing system has been demonstrated to be able to provide real-time monitoring of human physiological signals, without an external power supply, which opens new opportunities for future self-powered multifunctional sensing systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Porous Ionic Membrane Based Flexible Humidity Sensor and its Multifunctional Applications
Li, T., Li, L., Sun, H., Xu, Y., Wang, X., Luo, H., Liu, Z., & Zhang, T. (2017) · Advanced Science · doi:10.1002/advs.201600404 · Cited by 298
Self-citation
Cited by
Moisture‐Enabled Electricity Generation: From Physics and Materials to Self‐Powered Applications
Shen, D., Duley, W. W., Peng, P., Xiao, M., Feng, J., Liu, L., Zou, G., & Zhou, Y. N. (2020) · Advanced Materials · doi:10.1002/adma.202003722 · Cited by 428
Portable and wearable self-powered systems based on emerging energy harvesting technology
Xu, C., Song, Y., Han, M., & Zhang, H. (2021) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00248-z · Cited by 408
Recent advances in humidity sensors for human body related humidity detection
Duan, Z., Jiang, Y., & Tai, H. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc04180k · Cited by 365
Harvesting Electricity from Water Evaporation through Microchannels of Natural Wood
Zhou, X., Zhang, W., Zhang, C., Tan, Y., Guo, J., Sun, Z., & Deng, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b23380 · Cited by 289
Metadata
- Authors
- Li, L., Chen, Z., Hao, M., Wang, S., Sun, F., Zhao, Z., & Zhang, T.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-26
- Volume
- 19
- Issue
- 8
- Pages
- 5544-5552
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2964553905
- Cited by
- 166
- References
- 2
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Moisture-Driven Power Generation for Multifunctional Flexible Sensing Systems. https://app.cochat.ai/papers/10.1021/acs.nanolett.9b02081
- The paper
- Li, L., Chen, Z., Hao, M., Wang, S., Sun, F., Zhao, Z., & Zhang, T. (2019). Moisture-Driven Power Generation for Multifunctional Flexible Sensing Systems. Nano Letters. https://doi.org/10.1021/acs.nanolett.9b02081
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.