The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Large Remnant Polarization in a Wake-Up Free Hf0.5Zr0.5O2 Ferroelectric Film through Bulk and Interface Engineering
Abstract
A wake-up free Hf 0.5 Zr 0.5 O 2 (HZO) ferroelectric film with the highest remnant polarization ( P r ) value to date was achieved through tuning of the ozone pulse duration, the annealing process, and the metal/insulator interface. The ozone dosage during the atomic layer deposition of HZO films appears to be a crucial parameter in suppressing the mechanisms driving the wake-up effect. A tungsten capping electrode with a relatively low thermal expansion coefficient enables the induction of an in-plane tensile strain, which increases the formation of the orthorhombic phase while decreasing the formation of the monoclinic phase during the cooling step of the annealing process. Therefore, increasing the annealing temperature T A followed by rapid cooling to room temperature resulted in a substantial increase in the 2 P r value (∼64 μC/cm 2 ). However, the leakage current increased considerably, which can affect the performance of metal–insulator–metal devices. To reduce the leakage current while maintaining the mechanical stress during thermal annealing, a 10 nm Pt layer was inserted between the W/HZO bottom interface. This resulted in an ∼20-fold decrease in the leakage current while the 2 P r value remained almost constant (∼60 μC/cm 2 ). The increase in barrier height at the Pt/HZO interface compared to that of the W/HZO interface coupled with the suppression of the formation of interfacial oxides (WO x ) by the introduction of a Pt/HZO interface serves to decrease the leakage current.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review on Conduction Mechanisms in Dielectric Films
Chiu, F.-C. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/578168 · Cited by 1,574
Electric field cycling behavior of ferroelectric hafnium oxide
Schenk, T., Schroeder, U., Pešić, M., Popovici, M., Pershin, Y. V., & Mikolajick, T. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504837r · Cited by 197
Cited by
Banerjee, W., Kashir, A., & Kamba, S. (2022) · Small · doi:10.1002/smll.202107575 · Cited by 277
Self-citation
Metadata
- Authors
- Kashir, A., Kim, H., Oh, S., & Hwang, H.
- Venue
- ACS Applied Electronic Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-01-20
- Volume
- 3
- Issue
- 2
- Pages
- 629-638
- ISSN
- 2637-6113 (ISSN-L)
- OpenAlex
- W3125334418
- Cited by
- 162
- References
- 2
- FWCI
- 7.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.