Three-Dimensional Carbonaceous Aerogels Embedded with Rh-SrTiO3 for Enhanced Hydrogen Evolution Triggered by Efficient Charge Transfer and Light Absorption
The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index; 6 of the 26 sources its claims cite were checked for support.
Abstract
Photocatalytic and photoelectrocatalytic hydrogen generation from water splitting by utilizing the visible spectrum of sunlight has been recognized as one of the promising energy conversion applications. Herein, we report the three-dimensional (3D) superstructure of g-C 3 N 4 and reduced graphene oxide embedded with Rh-doped SrTiO 3 nanoparticles as ternary aerogels for efficient hydrogen production. The optimized aerogel exhibits high competency for visible light harvesting due to the unique 3D morphology and shows excellent hydrogen evolution performance with quantum efficiencies of 51.1 and 26.9% at 450 and 600 nm monochromatic wavelengths, respectively. The 3D arrangement of integrated components helps in enhanced light absorption due to multiple reflections of incident light within the system and provides a high surface area with abundant reaction sites. Moreover, the ternary heterojunction facilitates efficient charge transfer owing to the suitable band positions of each component as evidenced by fluorescence lifetime, photocurrent, and impedance spectroscopic measurements, resulting in enhanced photocatalytic performance. In addition, the photoelectrocatalytic hydrogen evolution activity reveals the multifunctional nature of the synthesized catalysts. Thus, the hybrid design of the photocatalytic system realizes efficient hydrogen production in suspension and demonstrates the potential of aerogel-based materials as next-generation photocatalysts.
Overview
CoChat Summary
TL;DR
The authors synthesized ternary 3D aerogels of g-C3N4, reduced graphene oxide, and Rh-doped SrTiO3 (CNGRS) via a one-step hydrothermal route and used them for visible-light photocatalytic and photoelectrocatalytic H2 evolution. The optimized CNGRS2 aerogel gave 3467 μmol h−1 g−1 H2 with quantum efficiencies of 51.1% and 26.9% at 450 and 600 nm, attributed to efficient ternary-interface charge transfer and enhanced light absorption from the 3D porous morphology.
Key findings
- CNGRS2 (30 mg RST) produced 3467 μmol h−1 g−1 H2, described as ~21, 9, and 7 times higher than bare GCN (160 μmol h−1 g−1), RST (374 μmol h−1 g−1), and the control CNG aerogel (475 μmol h−1 g−1), respectively; CNGRS1, CNGRS3, and CNGRS4 gave 2172, 1523, and 841 μmol h−1 g−1.
- Quantum efficiencies of 51.1% (450 nm) and 26.9% (600 nm) and a visible-light-to-H2 conversion efficiency of 2.1% were reported for CNGRS2.
- CNGRS2 had a BET surface area of 71.13 m2 g−1 versus 56.59 m2 g−1 (GCN) and 29.58 m2 g−1 (RST), and a total pore volume of 0.084 cm3 g−1 versus 0.069 and 0.043 cm3 g−1; CNGRS4 dropped to 47.66 m2 g−1 with disturbed 3D morphology.
- Average fluorescence lifetimes decreased from 3.21 ns (GCN) to 2.30 ns (CNG) to 2.04 ns (CNGRS2); CNGRS2 showed the highest transient photocurrent (−2.0 μA cm−2), a reduction onset of 0.30 V vs RHE, and a Tafel slope of 200 mV dec−1 (Tafel–Heyrovsky mechanism).
- No obvious decline in performance was observed over three consecutive recyclability cycles, with PXRD, XPS, and SEM of recycled catalyst unchanged.
Methods
- Synthesis: GCN nanosheets from dicyandiamide (550 °C, 4 h; then 500 °C, 2 h), GO by modified Hummers' method, Rh-SrTiO3 (5 mol % Rh) by hydrothermal treatment at 180 °C for 24 h; CNGRS aerogels formed by hydrothermal co-assembly of GCN, GO, and RST at 180 °C for 6 h followed by freeze-drying, with RST varied at 15, 30, 45, and 60 mg (CNGRS1–4).
- Photocatalysis: 10 mg catalyst in 50 mL of 10 vol % TEOA aqueous solution under a 260 W Xe lamp (λ ≥ 420 nm) for 4 h, with H2 quantified hourly by offline GC (TCD).
- Characterization/analysis: PXRD, FTIR, SEM, TEM/HRTEM, EDAX, XPS, BET N2 adsorption–desorption, UV–vis DRS, PL, TCSPC, REELS, UPS, and photoelectrochemical measurements (LSV, EIS, transient photocurrent) in a three-electrode cell with 0.1 M Na2SO4.
Limitations
- The paper states no explicit limitations section. Evident from the text: no oxygen evolution was observed, so overall water splitting is ruled out and TEOA is consumed as a sacrificial reagent; recyclability was tested for only three consecutive cycles; the REELS-derived band gap of RST (3.2 eV) disagreed with the DRS value (2.45 eV), which the authors attribute to the surface sensitivity of REELS not probing the dilute Rh doping.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
6 Valid · 0 Not valid · 11 Not checked · 94 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The PXRD peaks of RST nanoparticles can be indexed to the cubic structure and Pm3m space group (JCPDS no. 35-0734).33”
§ 3. RESULTS AND DISCUSSION > 3.1. Synthesis and Structural Characterization of
What the sources say
- Partly supportedcites [33] sourceExperimental — accuracy not yet measured
Section 3.1 (page not provided) states that PXRD data for Rh-doped SrTiO₃ can be indexed to a cubic unit cell with the Pm3m space group. Our copy does not give the claimed JCPDS number 35-0734, so that part is unsupported. (LLM, conf=0.88)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The PXRD pattern of GO shows two distinct peaks at 2θ = 10.3 and 42.5°, which can be assigned to the (001) and (100) reflection planes, respectively.36”
§ 3. RESULTS AND DISCUSSION > 3.1. Synthesis and Structural Characterization of
What the sources say
- Partly supportedcites [36] sourceExperimental — accuracy not yet measured
The Results and Discussion section assigns two GO PXRD peaks to the [001] and [100] planes, as claimed. It reports their positions as approximately 9.33° and 42.20°, however, not 10.3° and 42.5°; the first numerical difference is substantial. (LLM, conf=0.90)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The RST nanoparticles showed a broad peak from 500 to 900 cm−1, which is the characteristic peak of TiO6 octahedron stretching vibrations.39”
§ 3. RESULTS AND DISCUSSION > 3.1. Synthesis and Structural Characterization of
What the sources say
- Partly supportedcites [39] sourceExperimental — accuracy not yet measured
The Results and discussion section assigns a broad SrTiO3 absorption band around 625 cm−1 to TiO6 octahedron stretching. It does not report a peak spanning 500–900 cm−1 or identify the measured particles as RST. (LLM, conf=0.85)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“Interestingly, the SEM micrograph of the CNG aerogel presented in Figure 2c revealed an interconnected 3D network-like structure, where the random connections of GCN and GO layers are compelled by π−π interactions.14,25”
§ 3. RESULTS AND DISCUSSION > 3.2. Morphology and Composition of Materials. The
What the sources say
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In all CNGRS aerogels, the peaks corresponding to their constituents are clearly visible with varying intensities.”
§ 3. RESULTS AND DISCUSSION > 3.1. Synthesis and Structural Characterization of
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
58 more claims
Create a free account to see all 111 claims and every source verdict.
- It may state two separate claims as one. 45
- Probably not a substantial claim. 4
Citations
Cites
Biomimetic Hydrogen Evolution: MoS 2 Nanoparticles as Catalyst for Hydrogen Evolution
Hinnemann, B., Moses, P. G., Bonde, J., Jørgensen, K. P., Nielsen, J. H., Horch, S., Chorkendorff, I., & Nørskov, J. K. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0504690 · Cited by 4,065
Graphene‐Like Carbon Nitride Nanosheets for Improved Photocatalytic Activities
Niu, P., Zhang, L., Liu, G., & Cheng, H. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200922 · Cited by 3,539
Particulate photocatalysts for overall water splitting
Chen, S., Takata, T., & Domen, K. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.50 · Cited by 2,186
Alam, S. N., Sharma, N., & Kumar, L. (2017) · Graphene · doi:10.4236/graphene.2017.61001 · Cited by 1,365
Ammonia and related chemicals as potential indirect hydrogen storage materials
Lan, R., Irvine, J. T. S., & Tao, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.10.004 · Cited by 1,207
Xu, H.-Q., Hu, J., Wang, D., Li, Z., Zhang, Q., Luo, Y., Yu, S.-H., & Jiang, H.-L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08773 · Cited by 1,166
A comparative technoeconomic analysis of renewable hydrogen production using solar energy
Shaner, M. R., Atwater, H. A., Lewis, N. S., & McFarland, E. W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02573g · Cited by 960
MoS2/Graphene Cocatalyst for Efficient Photocatalytic H2 Evolution under Visible Light Irradiation
Chang, K., Mei, Z., Wang, T., Kang, Q., Ouyang, S., & Ye, J. (2014) · ACS Nano · doi:10.1021/nn5019945 · Cited by 953
Photocatalytic Activities of Noble Metal Ion Doped SrTiO3 under Visible Light Irradiation
Konta, R., Ishii, T., Kato, H., & Kudo, A. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp049556p · Cited by 939
Perovskite Oxide Based Materials for Energy and Environment-Oriented Photocatalysis
Kumar, A., Kumar, A., & Krishnan, V. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c02947 · Cited by 636
Self-citationPreparation of graphene–TiO 2 composites with enhanced photocatalytic activity
Zhou, K., Zhu, Y., Yang, X., Jiang, X., & Li, C. (2011) · New J. Chem. · doi:10.1039/c0nj00623h · Cited by 576
A Graphitic‐C 3 N 4 “Seaweed” Architecture for Enhanced Hydrogen Evolution
Han, Q., Wang, B., Zhao, Y., Hu, C., & Qu, L. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504985 · Cited by 472
Iwashina, K., & Kudo, A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2050315 · Cited by 457
Wang, S., Wang, Y., Zhang, S. L., Zang, S., & Lou, X. W. (. (2019) · Advanced Materials · doi:10.1002/adma.201903404 · Cited by 438
Tong, Z., Yang, D., Shi, J., Nan, Y., Sun, Y., & Jiang, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09503 · Cited by 431
Biomimetic Hydrogen Evolution: MoS2 Nanoparticles as Catalyst for Hydrogen Evolution
Hinnemann, B., Moses, P. G., Bonde, J., Joergensen, K. P., Nielsen, J. H., Horch, S., Chorkendorff, I., & Noerskov, J. K. (2005) · ChemInform · doi:10.1002/chin.200525015 · Cited by 369
Carbon Nitride Aerogels for the Photoredox Conversion of Water
Ou, H., Yang, P., Lin, L., Anpo, M., & Wang, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705926 · Cited by 360
Yu, R., Shi, Y., Yang, D., Liu, Y., Qu, J., & Yu, Z.-Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04655 · Cited by 325
Yang, J., Chen, D., Zhu, Y., Zhang, Y., & Zhu, Y. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.12.035 · Cited by 319
Ultrasmall MoOx Clusters as a Novel Cocatalyst for Photocatalytic Hydrogen Evolution
Zhang, H., Zhang, P., Qiu, M., Dong, J., Zhang, Y., & Lou, X. W. (. (2019) · Advanced Materials · doi:10.1002/adma.201804883 · Cited by 309
Navakoteswara Rao, V., Lakshmana Reddy, N., Mamatha Kumari, M., Ravi, P., Sathish, M., Kuruvilla, K. M., Preethi, V., Reddy, K. R., Shetti, N. P., Aminabhavi, T. M., et al. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.04.090 · Cited by 246
Self-citationKumar, S., Reddy, N. L., Kushwaha, H. S., Kumar, A., Shankar, M. V., Bhattacharyya, K., Halder, A., & Krishnan, V. (2017) · ChemSusChem · doi:10.1002/cssc.201701024 · Cited by 210
Self-citationMonolithic aerogel photocatalysts: a review
Wan, W., Zhang, R., Ma, M., & Zhou, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09227j · Cited by 205
Yuan, Y.-J., Yang, Y., Li, Z., Chen, D., Wu, S., Fang, G., Bai, W., Ding, M., Yang, L.-X., Cao, D.-P., et al. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00030 · Cited by 205
Manickam, S., Muthoosamy, K., Geetha Bai, R., Babangida Abubakar, I., Mudavasseril Sudheer, S., Hongngee, L., Hwei-San, L., Nayming, H., & Ch, C. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s75213 · Cited by 204
Luo, Y., Deng, B., Pu, Y., Liu, A., Wang, J., Ma, K., Gao, F., Gao, B., Zou, W., & Dong, L. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.01.089 · Cited by 192
Theoretical Investigation of the Metal-Doped SrTiO3 Photocatalysts for Water Splitting
Chen, H.-C., Huang, C.-W., Wu, J. C. S., & Lin, S.-T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300910e · Cited by 171
Wang, M., Ju, P., Li, J., Zhao, Y., Han, X., & Hao, Z. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01386 · Cited by 171
Xian, T., Yang, H., Di, L., Ma, J., Zhang, H., & Dai, J. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-327 · Cited by 170
Hiew, B. Y. Z., Lee, L. Y., Lee, X. J., Thangalazhy-Gopakumar, S., Gan, S., Lim, S. S., Pan, G.-T., Yang, T. C.-K., Chiu, W. S., & Khiew, P. S. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.02.010 · Cited by 169
Kumar, S., Kumar, A., Kumar, A., & Krishnan, V. (2020) · Catalysis Reviews · doi:10.1080/01614940.2019.1684649 · Cited by 166
Self-citationValencia, C., Valencia-Llano, C. H., Zuluaga, F., Zapata, M. E. V., Hernández, J. H. M., & Grande‐Tovar, C. D. (2018) · Molecules · doi:10.3390/molecules23102651 · Cited by 163
Zhang, Q., Huang, Y., Xu, L., Cao, J.-J., Ho, W., & Lee, S. C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11887 · Cited by 161
Hu, K., Xie, X., Szkopek, T., & Cerruti, M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04713 · Cited by 159
Kumar, A., Kumar, S., Bahuguna, A., Kumar, A., Sharma, V., & Krishnan, V. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00362e · Cited by 154
Self-citationKumar, A., Schuerings, C., Kumar, S., Kumar, A., & Krishnan, V. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.62 · Cited by 153
Self-citationKumar, S., Kumar, A., Rao, V. N., Kumar, A., Shankar, M. V., & Krishnan, V. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00790 · Cited by 153
Self-citationKumar, S., Reddy, N. L., Kumar, A., Shankar, M. V., & Krishnan, V. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.113 · Cited by 148
Self-citationHollow CaTiO3 cubes modified by La/Cr co-doping for efficient photocatalytic hydrogen production
Wang, R., Ni, S., Liu, G., & Xu, X. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.11.061 · Cited by 132
Wang, S., Wang, Y., Zhang, S. L., Zang, S., & Lou, X. W. (. (2019) · Advanced Materials · doi:10.1002/adma.201970291 · Cited by 130
Surface, optical and photocatalytic properties of Rb doped ZnO nanoparticles
Kumar, P., Kumar, A., Rizvi, M. A., Moosvi, S. K., Krishnan, V., Duvenhage, M., Roos, W. D., & Swart, H. C. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145930 · Cited by 127
Self-citationKang, J., Byun, S., Kim, S., Lee, J., Jung, M., Hwang, H., Kim, T. W., Song, S. H., & Lee, D. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01590 · Cited by 114
Hu, J., Chen, D., Li, N., Xu, Q., Li, H., He, J., & Lu, J. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.04.080 · Cited by 113
Ye, S., Liu, Y., & Feng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04536 · Cited by 108
A Graphitic‐C3N4 “Seaweed” Architecture for Enhanced Hydrogen Evolution
Han, Q. Y., Wang, B., Zhao, Y., et al. (2015) · Angewandte Chemie · doi:10.1002/ange.201504985 · Cited by 107
Gupta, A., Jamatia, R., Patil, R. A., Ma, Y.-R., & Pal, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00334 · Cited by 106
Kumar, A., Navakoteswara Rao, V., Kumar, A., Venkatakrishnan Shankar, M., & Krishnan, V. (2020) · ChemPhotoChem · doi:10.1002/cptc.201900267 · Cited by 102
Self-citationNano-structured rhodium doped SrTiO3–Visible light activated photocatalyst for water decontamination
Kiss, B., Manning, T. D., Hesp, D., Didier, C., Taylor, A., Pickup, D. M., Chadwick, A. V., Allison, H. E., Dhanak, V. R., Claridge, J. B., et al. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.01.066 · Cited by 89
Ma, X., Cui, X., Zhao, Z., Junior, M. A. D. M., Roberts, E. J., & Osterloh, F. E. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10934b · Cited by 88
Carbon Nitride Aerogels for the Photoredox Conversion of Water
Ou, H., Yang, P., Lin, L., Anpo, M., & Wang, X. (2017) · Angewandte Chemie · doi:10.1002/ange.201705926 · Cited by 84
You, Z., Wu, C., Shen, Q., Yu, Y., Chen, H., Su, Y., Wang, H., Wu, C., Zhang, F., & Yang, H. (2018) · Dalton Transactions · doi:10.1039/c8dt01322e · Cited by 80
Hafeez, H. Y., Lakhera, S. K., Shankar, M. V., & Neppolian, B. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.05.235 · Cited by 76
Self-citationShen, P., Lofaro, J. C., Woerner, W. R., White, M. G., Su, D., & Orlov, A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.03.030 · Cited by 75
Singh, M., Kumar, A., & Krishnan, V. (2020) · Materials Advances · doi:10.1039/d0ma00294a · Cited by 65
Self-citationReddy, N. L., Rao, V. N., Kumari, M. M., Sathish, M., & Venkatakrishnan, S. M. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.10.054 · Cited by 56
Self-citationCu–Ni Bimetal Integrated TiO2 Thin Film for Enhanced Solar Hydrogen Generation
Tudu, B., Nalajala, N., Saikia, P., & Gopinath, C. S. (2020) · Solar RRL · doi:10.1002/solr.201900557 · Cited by 46
Kang, H. W., Lim, S. N., & Park, S. B. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.006 · Cited by 40
Tanigawa, S., & Irie, H. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.06.008 · Cited by 38
Tailoring photocatalytic nanostructures for sustainable hydrogen production
Cargnello, M., & Diroll, B. T. (2013) · Nanoscale · doi:10.1039/c3nr05383k · Cited by 33
Li, G., Chen, Q., & Lan, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506684c · Cited by 32
Kang, H. W., & Park, S. B. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.10.073 · Cited by 31
Photocatalytic Activities of Noble Metal Ion Doped SrTiO3 under Visible Light Irradiation.
Konta, R., Ishii, T., Kato, H., et al. (2004) · ChemInform · doi:10.1002/chin.200437021 · Cited by 12
Zhang, J., Ding, J., Li, C., Li, B., Li, D., Liu, Z., Cai, Q., Zhang, J., & Liu, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02412 · Cited by 6
Iwashina, K., & Kudo, A. (2011) · ChemInform · doi:10.1002/chin.201150009
Cited by
Kumar, A., & Krishnan, V. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009807 · Cited by 323
Self-citationPhotocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future
Irshad, M., Ain, Q. T., Zaman, M., Aslam, M. Z., Kousar, N., Asim, M., Rafique, M., Siraj, K., Tabish, A. N., Usman, M., et al. (2022) · RSC Advances · doi:10.1039/d1ra08185c · Cited by 191
Sharma, V., Kumar, A., Kumar, A., & Krishnan, V. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.132119 · Cited by 142
Self-citationTian, L., Chen, H., Lü, X., Liu, D., Cheng, W., Liu, Y., Li, J., & Li, Z. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.07.125 · Cited by 132
Kumar, A., Kumar, M., Rao, V. N., Shankar, M. V., Bhattacharya, S., & Krishnan, V. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04180k · Cited by 119
Self-citation
Metadata
- Authors
- Kumar, A., Navakoteswara Rao, V., Kumar, A., Mushtaq, A., Sharma, L., Halder, A., Pal, S. K., Shankar, M. V., & Krishnan, V.
- Affiliations
- Indian Institute of Technology Mandi (IN)
- Nanocatalysis and Solar Fuels Research Laboratory, Department of Materials Science & Nanotechnology, Yogi Vemana University, Kadapa 516005, Andhra Pradesh, India
- Yogi Vemana University (IN)
- Corresponding author
- Krishnan, Venkata
- ORCID
- Venue
- ACS Applied Energy Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-12-14
- Volume
- 3
- Issue
- 12
- Pages
- 12134-12147
- ISSN
- 2574-0962 (ISSN-L)
- OpenAlex
- W3112290161
- Semantic Scholar
- 1742df7c857fcc79583c7aa0e9550f251b3b9447
- Cited by
- 67
- References
- 64
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 13 · 2023: 18 · 2022: 15 · 2021: 13
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Energy Materials (publishedVersion)
- Funders
- Council of Scientific and Industrial Research
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Keywords
- photocatalytic hydrogen evolution, photoelectrocatalytic hydrogen evolution, g-C3N4, reduced graphene oxide, visible light absorption, charge transfer, heterojunction, water splitting, solar hydrogen production
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.