The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Waterproof, Highly Tough, and Fast Self-Healing Polyurethane for Durable Electronic Skin
Abstract
A stretchable electronic skin (e-skin) requires a durable elastomeric matrix to serve in various conditions. Therefore, excellent and balanced properties such as elasticity, water proof capability, toughness, and self-healing are demanded. However, it is very difficult and often contradictory to optimize them at one time. Here, a polyurethane (BS-PU-3) containing a polydisperse hard segment, hydrophobic soft segment, and a dynamic disulfide bond was prepared by one-pot synthesis. Unlike the normal two-pot reaction, BS-PU-3 obtained through the one-pot method owned a higher density of self-healing points along the main chain and a faster self-healing speed, which reached 1.11 μm/min in a cut-through sample and recovered more than 93% of virgin mechanical properties in 6 h at room temperature. Moreover, a remarkable toughness of 27.5 MJ/m 3 assures its durability as an e-skin matrix. Even with a 1 mm notch (half of the total width) on a standard dumbbell specimen, it could still bear the tensile strain up to 324% without any crack propagation. With polybutadiene as the soft segment, the shape, microstructure, and conductivity in BS-PU-3 and BS-PU-3-based stretchable electronics kept very stable after soaking in water for 3 days, proving the super waterproof property. An e-skin demo was constructed, and self-healing in pressure sensitivity, mechanical, and electrical properties were verified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
A skin-inspired organic digital mechanoreceptor
Tee, B. C.-K., Chortos, A., Berndt, A., Nguyen, A. K., Tom, A., McGuire, A., Lin, Z. C., Tien, K., Bae, W.-G., Wang, H., et al. (2015) · Science · doi:10.1126/science.aaa9306 · Cited by 882
Hu, W., Niu, X., Zhao, R., & Pei, Q. (2013) · Applied Physics Letters · doi:10.1063/1.4794143 · Cited by 332
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706050 · Cited by 208
Wei, M., Zhan, M., Yu, D., Xie, H., He, M., Yang, K., & Wang, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507575z · Cited by 153
An ambient-stable and stretchable ionic skin with multimodal sensation
Ying, B., Wu, Q., Li, J., & Liu, X. (2020) · Materials Horizons · doi:10.1039/c9mh00715f · Cited by 146
Chen, S., Mo, F., Yang, Y., Stadler, F. J., Chen, S., Yang, H., & Ge, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06304j · Cited by 126
Cited by
Wang, Y., Huang, X., & Zhang, X. (2021) · Nature Communications · doi:10.1038/s41467-021-21577-7 · Cited by 467
Nanocomposite hydrogel-based strain and pressure sensors: a review
Sun, X., Yao, F., & Li, J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06965e · Cited by 420
Self-healing polyurethane with high strength and toughness based on a dynamic chemical strategy
Dong, F., Yang, X., Guo, L., Wang, Y., Shaghaleh, H., Huang, Z., Xu, X., Wang, S., & Liu, H. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta00802e · Cited by 285
Ying, B., Chen, R. Z., Zuo, R., Li, J., & Liu, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104665 · Cited by 273
Metadata
- Authors
- Ying, W. B., Yu, Z., Kim, D. H., Lee, K. J., Hu, H., Liu, Y., Kong, Z., Wang, K., Shang, J., Zhang, R., Zhu, J., & Li, R.-W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-11
- Volume
- 12
- Issue
- 9
- Pages
- 11072-11083
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3005776520
- Cited by
- 251
- References
- 8
- FWCI
- 12.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.