Multifunctional BaTiO3-Based Relaxor Ferroelectrics toward Excellent Energy Storage Performance and Electrostrictive Strain Benefiting from Crossover Region
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Lead-free relaxor ferroelectrics (RFEs) exhibit a broader variety of phenomena in comparison with the “canonical” lead-containing compositions, rendering them attractive for newly multifunctional materials with low-cost and eco-friendly processing. Here, guided by the characteristics of relaxor ferroelectrics, lead-free (1 – x )BaTiO 3 – x KNbO 3 systems are conceived and optimized to construct a special crossover region, which brings multiple benefits including tiny hysteresis loss while pursuing high maximum polarization, and large electrostrictive strain with low hysteresis, targeting multifunctional applications of energy storage capacitors, and electrostrictive actuators. We obtained fine-grained 0.96BaTiO 3 –0.04KNbO 3 ceramic with a crossover region where nanodomains and nanosized polar regions with highly dynamic coexist, achieving a large recoverable energy density of 2.03 J/cm 3 (300 kV/cm) simultaneously with sky-high charge–discharge efficiency of 94.5%, where low-cost production and environmental issues are warranted. By utilizing the crossover region, superior temperature-stable energy storage capacity (without a drop from 20 to 130 °C) guarantees the practical use. Meanwhile, this strategy favors large electrostrictive strain (0.146%) with ultralow hysteresis in 0.96BT-0.04KN at 80 kV/cm, which is suitable for electrostrictive actuators. It is expected that this strategy will stimulate future studies on lead-free multifunctional RFEs toward energy storage capacitors or electrostrictive actuators with low-cost and environmental compatibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals
Park, S.-E., & Shrout, T. R. (1997) · Journal of Applied Physics · doi:10.1063/1.365983 · Cited by 4,157
BaTiO3-Based Piezoelectrics: Fundamentals, Current Status, and Perspectives
Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., & Rödel, J. (2017) · Applied Physics Reviews · doi:10.1063/1.4990046 · Cited by 1,451
Freezing of the polarization fluctuations in lead magnesium niobate relaxors
Viehland, D., Jang, S. J., Cross, L. E., & Wuttig, M. (1990) · Journal of Applied Physics · doi:10.1063/1.346425 · Cited by 1,343
Ultrahigh–energy density lead-free dielectric films via polymorphic nanodomain design
Pan, H., Li, F., Liu, Y., Zhang, Q., Wang, M., Lan, S., Zheng, Y., Ma, J., Gu, L., Shen, Y., et al. (2019) · Science · doi:10.1126/science.aaw8109 · Cited by 1,149
Lead‐Free Relaxor Ferroelectrics
Shvartsman, V. V., & Lupascu, D. C. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04952.x · Cited by 1,055
Dielectric and Piezoelectric Properties of 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 Single Crystals
Kuwata, J., Uchino, K., & Nomura, S. (1982) · Japanese Journal of Applied Physics · doi:10.1143/jjap.21.1298 · Cited by 1,000
The giant electromechanical response in ferroelectric relaxors as a critical phenomenon
Kutnjak, Z., Petzelt, J., & Blinc, R. (2006) · Nature · doi:10.1038/nature04854 · Cited by 740
Contributions to the piezoelectric effect in ferroelectric single crystals and ceramics
Damjanovic, D. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00671.x · Cited by 708
Glassy polarization behavior in ferroelectric compounds and
Burns, G., & Dacol, F. H. (1983) · Solid State Communications · doi:10.1016/0038-1098(83)90132-1 · Cited by 698
Qi, H., Zuo, R., Xie, A., Tian, A., Fu, J., Zhang, Y., & Zhang, S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903877 · Cited by 655
Ultrahigh energy storage density lead-free multilayers by controlled electrical homogeneity
Wang, G., Li, J., Zhang, X., Fan, Z., Yang, F., Feteira, A., Zhou, D., Sinclair, D. C., Ma, T., Tan, X., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03287d · Cited by 581
Electrostrictive effect in ferroelectrics: An alternative approach to improve piezoelectricity
Li, F., Jin, L., Xu, Z., & Zhang, S. (2014) · Applied Physics Reviews · doi:10.1063/1.4861260 · Cited by 570
Qi, H., & Zuo, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12232f · Cited by 555
Zhou, M., Liang, R., Zhou, Z., & Dong, X. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03003k · Cited by 535
Li, F., Zhang, S., Damjanovic, D., Chen, L., & Shrout, T. R. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801504 · Cited by 529
PLZT electrooptic materials and applications—a review
Haertling, G. H. (1987) · Ferroelectrics · doi:10.1080/00150198708008208 · Cited by 499
BaTiO3–BiYbO3perovskite materials for energy storage applications
Shen, Z., Wang, X., Luo, B., & Li, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03614c · Cited by 456
High‐Performance Relaxor Ferroelectric Materials for Energy Storage Applications
Zhao, P., Wang, H., Wu, L., Chen, L., Cai, Z., Li, L., & Wang, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803048 · Cited by 432
Progress, Outlook, and Challenges in Lead‐Free Energy‐Storage Ferroelectrics
Sun, Z., Wang, Z., Tian, Y., Wang, G., Wang, W., Yang, M., Wang, X., Zhang, F., & Pu, Y. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.201900698 · Cited by 338
Lead-free BaTiO3–Bi(Zn2/3Nb1/3)O3 weakly coupled relaxor ferroelectric materials for energy storage
Wu, L., Wang, X., & Li, L. (2016) · RSC Advances · doi:10.1039/c5ra21261h · Cited by 310
Requirements for the transfer of lead-free piezoceramics into application
Koruza, J., Bell, A. J., Frömling, T., Webber, K. G., Wang, K., & Rödel, J. (2018) · Journal of Materiomics · doi:10.1016/j.jmat.2018.02.001 · Cited by 286
Electrostrictive effect in perovskites and its transducer applications
Uchino, K., Nomura, S., Cross, L. E., Newnham, R. E., & Jang, S. J. (1981) · Journal of Materials Science · doi:10.1007/bf00552193 · Cited by 284
Ferroelectric to relaxor crossover and dielectric phase diagram in the BaTiO3–BaSnO3 system
Lei, C., Bokov, A. A., & Ye, Z.-G. (2007) · Journal of Applied Physics · doi:10.1063/1.2715522 · Cited by 281
Jin, L., Huo, R., Guo, R., Li, F., Wang, D., Tian, Y., Hu, Q., Wei, X., He, Z., Yan, Y., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08879 · Cited by 234
Glassy polarization behavior of relaxor ferroelectrics
Viehland, D., Li, J. F., Jang, S. J., Cross, L. E., & Wuttig, M. (1992) · Physical Review B · doi:10.1103/physrevb.46.8013 · Cited by 217
Li, F., Zhou, M., Zhai, J., Shen, B., & Zeng, H. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.06.038 · Cited by 202
High, Purely Electrostrictive Strain in Lead‐Free Dielectrics
Ang, C., & Yu, Z. (2005) · Advanced Materials · doi:10.1002/adma.200500951 · Cited by 156
Giant electrostrictive effects of NaNbO3-BaTiO3 lead-free relaxor ferroelectrics
Zuo, R., Qi, H., Fu, J., Li, J., Shi, M., & Xu, Y. (2016) · Applied Physics Letters · doi:10.1063/1.4953457 · Cited by 127
Jin, L., Luo, W., Hou, L., Tian, Y. F., Hu, Q., Wang, L., Zhang, L., Lü, X., Du, H., Wei, X., et al. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.09.005 · Cited by 105
Novel bismuth ferrite-based lead-free incipient piezoceramics with high electromechanical response
Liu, X., Zhai, J., & Shen, B. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc00826h · Cited by 96
Huang, Y., Zhao, C., Yin, J., Lv, X., Ma, J., & Wu, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05681e · Cited by 94
Self-citationHigh electrostrictive strain in lead-free relaxors near the morphotropic phase boundary
Li, T., Liu, C. L., Ke, X., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.034 · Cited by 90
Jin, L., Luo, W., Wang, L., Tian, Y. F., Hu, Q., Hou, L., Zhang, L., Lü, X., Du, H., Wei, X., et al. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.09.019 · Cited by 78
Sun, Z., Li, L., Yu, S., Kang, X.-Y., & Chen, S. (2017) · Dalton Transactions · doi:10.1039/c7dt03140h · Cited by 70
Lü, X., Hou, L., Jin, L., Wang, D., Hu, Q., Alikin, D., Turygin, A. P., Wang, L., Zhang, L., & Wei, X. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.03.026 · Cited by 52
Lü, X., Wang, L., Jin, L., Hu, Q., Tian, Y. F., Hou, L., Yu, K., Zhang, L., Wei, X., Yan, Y., et al. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.04.257 · Cited by 44
Cited by
Qi, H., Xie, A., & Zuo, R. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2021.11.043 · Cited by 324
Progress and outlook on lead-free ceramics for energy storage applications
Yan, F., Qian, J., Wang, S., & Zhai, J. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109394 · Cited by 289
Multifunctional barium titanate ceramics via chemical modification tuning phase structure
Zhao, C., Huang, Y., & Wu, J. (2020) · InfoMat · doi:10.1002/inf2.12147 · Cited by 242
Self-citation
Metadata
- Authors
- Huang, Y., Zhao, C., Wu, B., & Wu, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-29
- Volume
- 12
- Issue
- 21
- Pages
- 23885-23895
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3018691315
- Cited by
- 185
- References
- 36
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.