The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation
Abstract
Abstract The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. Ag-PDA@wood exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, Ag-PDA@wood has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m–2 h–1 is achieved using Ag-PDA@wood under 1 sun (1 kW m–2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that Ag-PDA@wood has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, Ag-PDA@wood exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, Ag-PDA@wood has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
Solar-driven interfacial evaporation
Tao, P., Ni, G., Song, C., Shang, W., Wu, J., Zhu, J., Chen, G., & Deng, T. (2018) · Nature Energy · doi:10.1038/s41560-018-0260-7 · Cited by 2,380
Cited by
Interfacial Solar Evaporation: From Fundamental Research to Applications
Wu, X., Lu, Y., Ren, X., Wu, P., Chu, D., Yang, X., & Xu, H. (2024) · Advanced Materials · doi:10.1002/adma.202313090 · Cited by 571
Stimuli-responsive polydopamine-based smart materials
Yang, P., Zhu, F., Zhang, Z., Cheng, Y., Wang, Z., & Li, Y. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00374g · Cited by 568
Self-citation
Metadata
- Authors
- Yang, J., Chen, Y., Jia, X., Li, Y., Wang, S., & Song, H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-22
- Volume
- 12
- Issue
- 41
- Pages
- 47029-47037
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3088481886
- Cited by
- 250
- References
- 2
- FWCI
- 6.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.